MAX14728

Dual-Input, Bidirectional Overvoltage Protector with Automatic Path Control

One OVP to Protect Dual-Input-Powered Portable Devices


Please check latest availability status for a specific part variant.

Description

The MAX14727/MAX14728/MAX14731 provide protection to valuable consumer circuits against two positive voltage faults up to +28VDC. An internal clamp also protects the devices from surges up to 100V. The devices automatically select the input source, with channel A being the primary supply.

These devices feature reverse bias-blocking capabilities. Unlike other overvoltage protectors, when the devices are disabled, the voltage applied to OUT does not feed back into either INA or INB. These devices also feature two OTG enable pins (OTG_ENA, OTG_ENB) that allow OUT voltage to supply the corresponding input when OUT is higher than the output startup voltage.

These overvoltage-protection devices feature high-voltage, low on-resistance (73mΩ, typ) internal FETs, effectively minimizing a voltage drop across the device. When the input voltage exceeds the overvoltage threshold, the internal FET is turned off to prevent damage to the protected components. The devices also have thermal-shutdown protection against overload conditions.

The overvoltage-protection threshold can be adjusted with optional external resistors to any voltage between 4V and 14V. The devices automatically choose the appropriate internal trip thresholds when the overvoltage-lockout input is set lower than the external OVLO select voltage. The internal OVLO are preset to 13.75V (typ) (MAX14727), 10V (typ) (MAX14728), or 5.92V (typ) (MAX14731).

The devices are specified over the extended -40°C to +85°C temperature range, and are available in a 30-bump, wafer-level package (WLP).
MAX14727, MAX14728, MAX14731: Functional Diagram MAX14727, MAX14728, MAX14731: Functional Diagram Enlarge+

Key Features

  • Protects Portable Devices with Dual-Input Power
    • Wide Operating Input-Voltage Protection from 3V to 28V
    • 5A Continuous-Current Capability
    • Integrated 73mΩ (typ) nMOSFET Switch
  • Allows Flexible and Precise Design in OVLO Implementation
    • Wide Adjustable OVLO Threshold Range from 4V to 14V
    • OTG Enables Allow OUT Supply INA/INB
    • Preset Accurate Internal OVLO Thresholds:
      • 13.75V ±2% (MAX14727)
      • 10V ±2% (MAX14728)
      • 5.92V ±2% (MAX14731)
  • Increases System Reliability Through Premium Security
    • Surge Immunity Over +100V
    • Soft-Start to Minimize In-Rush Current
    • Internal 15ms Startup Debounce
    • Thermal Shutdown Protection
  • Minimizes Board Space With Compact Package
    • 30-Bump, 2.6mm x 2.2mm WLP

Applications/Uses

  • e-Readers
  • Smartphones
  • Tablets
Part NumberChannelsVIN
(V)
VIN
(V)
Over Voltage Trip Level
(V)
tGATE (On)
(ms)
tGATE (Off)
(µs)
Package/PinsBudgetary
Price
minmaxSee Notes
MAX14727 2-0.32913.750.120.2
WLP/30
$0.96 @1
MAX14728 10
WLP/30
MAX14731 5.9
WLP/30
See All Overvoltage Protection Controllers (81)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX14727EVKIT: Evaluation Kit for the MAX14727/MAX14728/MAX14731

Quality and Environmental Data

Request Reliability Report for: MAX14728 
Lead-Free Package Tin (Sn) Whisker Reports

CAD Symbols and Footprints

  • MAX14728EWV+
  • MAX14728EWV+T
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX20333A
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20333B
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20333
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20333C
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20333D
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20333F
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20333I
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20333G
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20333H
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20333E
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20333J
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20333K
    Adjustable Current-Limit Switch with Low Power Mode

    • Flexible Operation
    • Safe Operation
    • Power Savings

    MAX20334
    OverVoltage and Surge-Protected Dual SPDT Data Line Switch

    • Distortion-Free, High-Speed Signaling
    • Flexible System Design
    • Robust and Safety

    MAX17613A
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count

    MAX17613B
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count

    MAX17613C
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count