MAX14713

Compact 6A Smart Power Path Selector

Provides the system power from two separate power sources with ultra-low supply current


Please check latest availability status for a specific part variant.

Description

The MAX14713 compact 6A smart power path selector features a low, 11mΩ (typ) RON internal FET and provides the system power from two separate power sources. The device has two switches in SPDT configuration, with bidirectional current-blocking capability when the switch is off.

The MAX14713 features two individual enable inputs to control each power path. Each enable input controls the corresponding path as an independent switch. However, when both paths are enabled, the internal comparator controls the path based on the voltage at input nodes. The device also features an ultra-low supply current, in the operating or off states, for longer battery life.

The device is available in a 15-bump (1.2mm x 2.0mm) wafer-level package (WLP) and operates over the -40ºC to +85ºC extended temperature range.
MAX14713: Typical Operating Circuit MAX14713: Typical Operating Circuit Enlarge+

Key Features

  • Provides Robust Bidirectional Power Path
    • Wide Operating Input Voltage: +1.6V to +5.5V
    • 6A Continuous Current Capability
    • Integrated Two 11mΩ (typ) MOSFET Switches
  • Simple Power-Switch Design
    • Individual Path Control
    • Automatic Power Path Control
    • Automatic Soft-Start
    • Powered by IN1, IN2, or OUT
  • Long Battery Life
    • Ultra-Low Quiescent Supply Current 2.5μA (typ)
    • Fast Switchover
    • Optimum Soft-Start Feature
  • Space-Saving Package
    • 15-Bump 1.2mm x 2.0mm WLP

Applications/Uses

  • e-Readers
  • Smart Phones
  • Tablet PCs
  • Wearables

See parametric specs for Overvoltage Protection Controllers (74)


Part NumberChannelsVIN
(V)
VIN
(V)
VGATE
(V)
tGATE (On)
(ms)
tGATE (Off)
(µs)
Oper. Temp.
(°C)
Package/PinsBudgetary
Price
minmaxSee Notes
MAX14713 
1
2
-0.35.55.750.020.2-45 to +85
WLP/15
$0.67 @1k

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX14713EVKIT: Evaluation Kit for the MAX14713/MAX14714
Request Reliability Report for: MAX14713 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX15162
8V to 60V Smart Dual 1.5A Circuit Breaker with Accurate Current Monitoring

  • 8V to 60V Wide Input Voltage Range
  • Integrated Dual-Power MOSFET 
  • Turn-On Resistance 140mΩ (WLP), 180mΩ (TQFN) MOSFET

MAX16543
Integrated Protection IC on a High-Power 12V Bus with an Integrated MOSFET and Lossless Current Sensing

  • Used with the MAX16545B/MAX16545C to Provide Integrated Protection for Loads > 60A On 12V Bus
  • High Density: Industry’s Smallest Circuit Breaker Solution Provides More Than 75% Board Area Savings
  • Lossless, Precise Total System Current Sensing and Reporting

MAX16545B
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management

MAX16545C
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management