MAX14699EVKIT

Evaluation Kit for the MAX14699


Please check latest availability status for a specific part variant.

Description

The MAX14699 evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the MAX14699 high-accuracy, surge-protected overvoltage protector device. The EV kit comes with the MAX14699EWC+ installed.

Key Features

  • 2.1V to 28V Operating Voltage Range
  • Active-Low ACOK LED Reading
  • Proven PCB Layout
  • Fully Assembled and Tested

Applications/Uses

  • Portable Media Players
  • Smartphones
  • Tablet PCs

Tools & Models

  • MAX14699EVKIT ODB File
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX15162
    8V to 60V Smart Dual 1.5A Circuit Breaker with Accurate Current Monitoring

    • 8V to 60V Wide Input Voltage Range
    • Integrated Dual-Power MOSFET 
    • Turn-On Resistance 140mΩ (WLP), 180mΩ (TQFN) MOSFET

    MAX16543
    Integrated Protection IC on a High-Power 12V Bus with an Integrated MOSFET and Lossless Current Sensing

    • Used with the MAX16545B/MAX16545C to Provide Integrated Protection for Loads > 60A On 12V Bus
    • High Density: Industry’s Smallest Circuit Breaker Solution Provides More Than 75% Board Area Savings
    • Lossless, Precise Total System Current Sensing and Reporting

    MAX16545B
    Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

    • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
    • Enables Advanced System Power Management

    MAX16545C
    Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

    • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
    • Enables Advanced System Power Management