MAX14572

Adjustable Overvoltage and Overcurrent Protectors with High Accuracy

Industry's Most Integrated Current-Limit and Overvoltage-Protection Solutions for Up to 40V and 4.2A


Please check latest availability status for a specific part variant.

Description

The MAX14571/MAX14572/MAX14573 adjustable overvoltage-and overcurrent-protection devices are ideal to protect systems against positive and negative input voltage faults up to ±40V and feature low 100mΩ (typ) RON FETs.

The overvoltage-protector (OVP) feature protects voltages between 6V and 36V, while the undervoltage-protector (UVP) feature protects voltages between 4.5V and 24V. The overvoltage-lockout (OVLO) and undervoltage-lockout (UVLO) thresholds are set using optional external resistors. The factory-preset internal OVLO threshold is 33V (typ) and the preset internal UVLO threshold is 19.2V (typ).

The ICs also feature programmable current-limit protection up to 4.2A. Once current reaches the threshold, the MAX14571 turns off after the 20.7ms (typ) blanking time and stays off during the retry period. The MAX14572 latches off after the blanking time, and the MAX14573 limits the current continuously. In addition, these devices feature reverse current and thermal-shutdown protection.

The ICs are available in a small 14-pin TSSOP (5mm × 6.5mm) package and are specified over the extended -40°C to +85°C temperature range.

MAX14571, MAX14572, MAX14573: Functional Diagram MAX14571, MAX14572, MAX14573: Functional Diagram Enlarge+

Key Features

  • Integrated Protection Increases System Reliability
    • Adjustable OVLO and UVLO Thresholds (±3% Accurate Preset Thresholds)
    • Automatic Internal and External Selection
    • Programmable Forward Current Limit (Adjustable Up to 4.2A) with ±15% Accuracy
    • Thermal-Shutdown Protection
    • 100mΩ (typ) On-Resistance FET
  • Special Features Facilitate Designs for Industrial Applications
    • Wide 4.5V to 36V Operating Input Range
    • Reverse-Current Flow Option for Inductive Loads
    • Independent Microprocessor Enable Input (EN) and High-Voltage-Capable Input (Active-Low HVEN)

Applications/Uses

  • Battery-Powered Applications
  • Consumer Electronics
  • Industrial Equipment
  • Marine Equipment

MAX14571EVKIT: Evaluation Kit for the MAX14571, MAX14572, and MAX14573
Product Reliability Reports: MAX14572.pdf 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX15162
8V to 60V Smart Dual 1.5A Circuit Breaker with Accurate Current Monitoring

  • 8V to 60V Wide Input Voltage Range
  • Integrated Dual-Power MOSFET 
  • Turn-On Resistance 140mΩ (WLP), 180mΩ (TQFN) MOSFET

MAX16543
Integrated Protection IC on a High-Power 12V Bus with an Integrated MOSFET and Lossless Current Sensing

  • Used with the MAX16545B/MAX16545C to Provide Integrated Protection for Loads > 60A On 12V Bus
  • High Density: Industry’s Smallest Circuit Breaker Solution Provides More Than 75% Board Area Savings
  • Lossless, Precise Total System Current Sensing and Reporting

MAX16545B
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management

MAX16545C
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management