MAX14562

36V-Capable Overvoltage Protector with Regulated Output Voltage

36V-Capable Overvoltage Protector with Regulated Output Voltage Addresses a Variety of Portable Consumer Electronics


Please check latest availability status for a specific part variant.

Description

The MAX14562 protects valuable consumer circuits against voltage faults of up to +36V. This robust protection is implemented in a three-step scheme for a superior result. If the input is below the preset regulated output-voltage (VPROV) threshold, the output tracks the input minus the voltage drop (RON × ILOAD) across the pass FET. If the input exceeds VPROV, the output is regulated to VPROV. If the input rises further and exceeds the overvoltage lockout cutoff threshold (VOVLO), the output is disconnected from the input.

A low resistance 160mΩ (typ) FET is integrated in the MAX14562, effectively reducing the component count and application footprint. The MAX14562 also features thermal shutdown protection against a short-circuit event.

The MAX14562 is specified over the extended -40°C to +85°C temperature range and is available in 8-pin TDFN (2mm x 2mm) and 6-pin SC70 (2mm x 2.2mm) packages.
MAX14562: Typical Operating Circuit MAX14562: Typical Operating Circuit Enlarge+

Key Features

  • Input Voltage Protection Up to +36V
  • Preset Regulated Output Voltage (+5.15V typ)
  • Integrated 160mΩ (typ) N-Channel MOSFET Switch
  • Soft-Start to Minimize In-Rush Current
  • Overvoltage Cutoff Protection +8V (typ)
  • Thermal Shutdown Protection
  • -40°C to +85°C Operating Temperature Range

Applications/Uses

  • Bluetooth Headset
  • Digital Cameras
  • E-Book
  • Mobile Internet Device
  • Mobile Phones
  • PDAs
  • Portable Media Player
  • Smartphones
Request Reliability Report for: MAX14562 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX15162
8V to 60V Smart Dual 1.5A Circuit Breaker with Accurate Current Monitoring

  • 8V to 60V Wide Input Voltage Range
  • Integrated Dual-Power MOSFET 
  • Turn-On Resistance 140mΩ (WLP), 180mΩ (TQFN) MOSFET

MAX16543
Integrated Protection IC on a High-Power 12V Bus with an Integrated MOSFET and Lossless Current Sensing

  • Used with the MAX16545B/MAX16545C to Provide Integrated Protection for Loads > 60A On 12V Bus
  • High Density: Industry’s Smallest Circuit Breaker Solution Provides More Than 75% Board Area Savings
  • Lossless, Precise Total System Current Sensing and Reporting

MAX16545B
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management

MAX16545C
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management