/
/
/
Power Protection and Control 
/
/
Top ![]()
MAX15090C
2.7V to 18V, 12A, Hot-Swap Solution with Current Report Output
Smallest and Most Integrated Hot Swap for 12V Applications
Maxim Confidential 
MyMaxim SubscriptionsProduct Details
Key Features
Applications/Uses
Parametric specs for Overvoltage/Overcurrent Protectors with Internal MOSFETs
| VIN (V) (min) | 2.7 |
| VIN (V) (max) | 18 |
| Current Limit (A) (min) | 3 |
| Current Limit (A) (max) | 12 |
| # Channels | 1 |
| Internal Pwr. MOSFETs | NMOS |
| RON (mΩ) (typ) | 6 |
| Current Limit Accuracy (%) | 10 |
| Fault Response | Auto Retry |
| Oper. Temp. (°C) | -40 to +85 |
| Package/Pins | WLP HC/28 |
| Budgetary Price (See Notes) | 3.1 |
View More
Simplified Block Diagram
Technical Docs
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Parameters
Parametric specs for Overvoltage/Overcurrent Protectors with Internal MOSFETs
| VIN (V) (min) | 2.7 |
| VIN (V) (max) | 18 |
| Current Limit (A) (min) | 3 |
| Current Limit (A) (max) | 12 |
| # Channels | 1 |
| Internal Pwr. MOSFETs | NMOS |
| RON (mΩ) (typ) | 6 |
| Current Limit Accuracy (%) | 10 |
| Fault Response | Auto Retry |
| Oper. Temp. (°C) | -40 to +85 |
| Package/Pins | WLP HC/28 |
| Budgetary Price (See Notes) | 3.1 |
Key Features
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 6mΩ (typ) Internal Power MOSFET Overvoltage Protection
- Power-Good and Fault Outputs
- Programmable Undervoltage Lockout
- Current Reporting Without Need for External RSENSE
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff or Automatic Retry Options
- Safety Features Ensure Accurate, Robust Protection
- 12A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- Inrush Current Regulated at Startup with Foldback
- Implementation for di/dt Control
- IN-to-OUT Short-Circuit Detection
Applications/Uses
- Disk Drive Power
- Industrial
- RAID Systems
- Server I/O Cards
- Storage Bridge Bay
Description
The MAX15090B/MAX15090C ICs are integrated solutions for hot-swap applications requiring the safe insertion and removal of circuit line cards from a live backplane. The devices integrate a hot-swap controller, 6mΩ power MOSFET, and an electronic circuit-breaker protection in a single package.
The devices integrate an accurate current-sense circuitry and provide 220µA/A of proportional output current. The devices are designed for protection of 2.7V to 18V supply voltages.
These devices implement a foldback current limit during startup to control inrush current lowering di/dt and keep the MOSFET operating under safe operating area (SOA) conditions. After the startup cycle is complete, on-chip comparators provide VariableSpeed/BiLevel™ protection against short-circuit and overcurrent faults, and immunity against system noise and load transients. The load is disconnected in the event of a fault condition. The devices are factory calibrated to deliver accurate overcurrent protection with ±10% accuracy. During a fault condition, the MAX15090B latches off, while the MAX15090C enters autoretry mode.
The devices feature an IN-to-OUT short-circuit detection before startup. The devices provide a power-MOSFET GATE pin to program the slew rate during startup by adding an external capacitor. The devices have overvoltage/undervoltage input pins that can detect an overvoltage/undervoltage fault and disconnect the IN from the OUT. Additional features include internal overtemperature protection, power-good output, and fault-indicator output.
The MAX15090B/MAX15090C ICs are available in a 28-bump, 2.07mm x 3.53mm, power wafer-level package (WLP) and are rated over the -40°C to +85°C extended temperature range.
The devices integrate an accurate current-sense circuitry and provide 220µA/A of proportional output current. The devices are designed for protection of 2.7V to 18V supply voltages.
These devices implement a foldback current limit during startup to control inrush current lowering di/dt and keep the MOSFET operating under safe operating area (SOA) conditions. After the startup cycle is complete, on-chip comparators provide VariableSpeed/BiLevel™ protection against short-circuit and overcurrent faults, and immunity against system noise and load transients. The load is disconnected in the event of a fault condition. The devices are factory calibrated to deliver accurate overcurrent protection with ±10% accuracy. During a fault condition, the MAX15090B latches off, while the MAX15090C enters autoretry mode.
The devices feature an IN-to-OUT short-circuit detection before startup. The devices provide a power-MOSFET GATE pin to program the slew rate during startup by adding an external capacitor. The devices have overvoltage/undervoltage input pins that can detect an overvoltage/undervoltage fault and disconnect the IN from the OUT. Additional features include internal overtemperature protection, power-good output, and fault-indicator output.
The MAX15090B/MAX15090C ICs are available in a 28-bump, 2.07mm x 3.53mm, power wafer-level package (WLP) and are rated over the -40°C to +85°C extended temperature range.
Technical Docs
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Request a Quote