Evaluation Kit for the MAX15068

Please check latest availability status for a specific part variant.


The MAX15068 evaluation kit (EV kit) provides a proven design to evaluate the MAX15068 dual ORing, single hotswap controller. The EV kit operates from a 4.8V to 18V range and provides a solution for evaluating two input supply rail applications requiring the safe insertion and removal of circuit line cards from a live backplane. Each rail has an individual ideal diode and is connected to the load through a single hot-swap MOSFET. The EV kit uses the MAX15068ATP+ in a 4mm x 5mm, 20-pin TQFN package on a proven four-layer PCB design.

Key Features

  • 4.8V to 18V Operating Voltage Range
  • Banana Jacks for Input and Output Voltage
  • Current Monitoring
  • Programmable Slew-Rate Control
  • Selectable Circuit-Breaker Threshold
  • Configurable Undervoltage Lockout
  • Adjustable Current-Limit Fault Delay
  • Active-Low FAULT and PG Outputs
  • Enable Input
  • Proven PCB Layout
  • Fully Assembled and Tested


  • Baseband Station
  • Computer Systems and Servers
  • Redundant Power Supplies
  • Storage Bridge Bay
  • Supply Holdup
  • Telecom Networks

Quality and Environmental Data

Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources