/
/
/
Power Protection and Control 
/
Top
/content/maximintegrated/en/products/power/protection-control/hot-swap-ics 
Hot-swap integrated circuits prevent system failures by managing the inrush current during live insertion of line cards. These ICs also limit current during the normal operation of high-availability systems. Maxim's solutions are optimized for networking, servers, and storage and telecom systems.
To enable proactive maintenance and diagnostics, selected hot-swap products improve system reliability by integrating current, voltage, and fault monitoring over an I²C interface. Other solutions integrate a power MOSFET and current sense to simplify designs and reduce the total bill of materials (BOM) cost.
Tools
Featured Technical Documents
Technical Documentation
Featured Products
MAX15090B 2.7V to 18V, 12A, Hot-Swap Solution with Current Report Output
The MAX15090B/MAX15090C ICs are integrated solutions for hot-swap applications requiring the saf...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 6mΩ (typ) Internal Power MOSFET Overvoltage Protection
- Power-Good and Fault Outputs
- Programmable Undervoltage Lockout
- Current Reporting Without Need for External RSENSE
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff or Automatic Retry Options
- Safety Features Ensure Accurate, Robust Protection
- 12A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- Inrush Current Regulated at Startup with Foldback
- Implementation for di/dt Control
- IN-to-OUT Short-Circuit Detection
MAX15090C 2.7V to 18V, 12A, Hot-Swap Solution with Current Report Output
The MAX15090B/MAX15090C ICs are integrated solutions for hot-swap applications requiring the saf...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 6mΩ (typ) Internal Power MOSFET Overvoltage Protection
- Power-Good and Fault Outputs
- Programmable Undervoltage Lockout
- Current Reporting Without Need for External RSENSE
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff or Automatic Retry Options
- Safety Features Ensure Accurate, Robust Protection
- 12A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- Inrush Current Regulated at Startup with Foldback
- Implementation for di/dt Control
- IN-to-OUT Short-Circuit Detection
MAX15093AEVKIT Evaluation Kit for the MAX15093/MAX15093A
The MAX15093/MAX15093A evaluation kits (EV kits) provide a proven design to evaluate the MAX1509...
- 2.7V to 18V Operating-Voltage Range
- Up to 15A Configurable Load-Current Capability
- Banana Jacks for Input and Output Voltage
- Programmable Slew-Rate Control
- Selectable/Configurable Circuit-Breaker Threshold
- Configurable Overvoltage/Undervoltage Lockout
- Programmable Timeout Delay
- FAULT and PG Outputs
- Defined Safe Operation Area
- Proven PCB Layout
- Fully Assembled and Tested
MAX15093EVKIT Evaluation Kit for the MAX15093/MAX15093A
The MAX15093/MAX15093A evaluation kits (EV kits) provide a proven design to evaluate the MAX1509...
- 2.7V to 18V Operating-Voltage Range
- Up to 15A Configurable Load-Current Capability
- Banana Jacks for Input and Output Voltage
- Programmable Slew-Rate Control
- Selectable/Configurable Circuit-Breaker Threshold
- Configurable Overvoltage/Undervoltage Lockout
- Programmable Timeout Delay
- FAULT and PG Outputs
- Defined Safe Operation Area
- Proven PCB Layout
- Fully Assembled and Tested
MAX15093 2.7V to 18V, 15A, Hot-Swap Solution with Current Report Output
The MAX15093/MAX15093A ICs are integrated solutions for hot-swap applications requiring the safe...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 3.8mΩ (typ) Internal Power MOSFET Overvoltage Protection
- Power-Good and Fault Outputs
- Programmable Undervoltage Lockout
- Current Reporting Without Need for External RSENSE
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15093) or Automatic Retry (MAX15093A) Options
- Safety Features Ensure Accurate, Robust Protection
- 15A Continuous Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- Inrush Current Regulated at Startup with Foldback
- Implementation for di/dt Control
- IN-to-OUT Short-Circuit Detection
MAX15093A 2.7V to 18V, 15A, Hot-Swap Solution with Current Report Output
The MAX15093/MAX15093A ICs are integrated solutions for hot-swap applications requiring the safe...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 3.8mΩ (typ) Internal Power MOSFET Overvoltage Protection
- Power-Good and Fault Outputs
- Programmable Undervoltage Lockout
- Current Reporting Without Need for External RSENSE
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15093) or Automatic Retry (MAX15093A) Options
- Safety Features Ensure Accurate, Robust Protection
- 15A Continuous Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- Inrush Current Regulated at Startup with Foldback
- Implementation for di/dt Control
- IN-to-OUT Short-Circuit Detection
MAX15095AEVKIT Evaluation Kit for the MAX15095A/MAX15095/MAX15095D
The MAX15095A evaluation kit (EV kit) provides a proven design to evaluate the MAX15095A hot-swa...
- 2.7V to 18V Operating Voltage Range
- Up to 6.6A Configurable Load Current Capability
- Banana Jacks for Input and Output Voltage
- Programmable Slew-Rate Control
- Selectable/Configurable Circuit-Breaker Threshold
- Configurable Overvoltage/Undervoltage Lockout
- Programmable Fast Comparator Response
- PG Output
- Defined Safe Operation Area
- Proven PCB Layout
- Fully Assembled and Tested
MAX15095D 2.7V to 18V, 6.6A Integrated Hot-Swap/Electronic Circuit Breaker
The MAX15095 family of devices are integrated solutions for hot-swap applications requiring the ...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 10.6mΩ (typ) Internal Power MOSFET
- Programmable Overvoltage Protection and Undervoltage-Lockout Threshold
- Drive-Present Signal Input (Active-Low PRSNT pin)
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Programmable Inrush Current Control Under SOA Operation
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15095) or Automatic Retry (MAX15095A) Options
- Safety Features Ensure Accurate, Robust Protection
- 6.6A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- IN-to-OUT Short-Circuit Detection
- Open-Drain PG Output
- Output Discharge After a Fault Event (MAX15095D Only)
- Programmable Additional Delay (2µs max) to Fast-Comparator Response Time
- Enable Input (EN)
MAX15095 2.7V to 18V, 6.6A Integrated Hot-Swap/Electronic Circuit Breaker
The MAX15095 family of devices are integrated solutions for hot-swap applications requiring the ...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 10.6mΩ (typ) Internal Power MOSFET
- Programmable Overvoltage Protection and Undervoltage-Lockout Threshold
- Drive-Present Signal Input (Active-Low PRSNT pin)
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Programmable Inrush Current Control Under SOA Operation
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15095) or Automatic Retry (MAX15095A) Options
- Safety Features Ensure Accurate, Robust Protection
- 6.6A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- IN-to-OUT Short-Circuit Detection
- Open-Drain PG Output
- Output Discharge After a Fault Event (MAX15095D Only)
- Programmable Additional Delay (2µs max) to Fast-Comparator Response Time
- Enable Input (EN)
MAX15095A 2.7V to 18V, 6.6A Integrated Hot-Swap/Electronic Circuit Breaker
The MAX15095 family of devices are integrated solutions for hot-swap applications requiring the ...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 10.6mΩ (typ) Internal Power MOSFET
- Programmable Overvoltage Protection and Undervoltage-Lockout Threshold
- Drive-Present Signal Input (Active-Low PRSNT pin)
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Programmable Inrush Current Control Under SOA Operation
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15095) or Automatic Retry (MAX15095A) Options
- Safety Features Ensure Accurate, Robust Protection
- 6.6A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- IN-to-OUT Short-Circuit Detection
- Open-Drain PG Output
- Output Discharge After a Fault Event (MAX15095D Only)
- Programmable Additional Delay (2µs max) to Fast-Comparator Response Time
- Enable Input (EN)
MAX15068 Dual ORing, Single Hot-Swap Controller with Accurate Current Monitoring
The MAX15068 offers ORing function and hot-swap features for two input-supply-rail applications ...
- 2.9V to 18V Operating Voltage Range (ORing and Hot Swap)
- Seamless Power Transition of Redundant Supplies
- Controls n-Channel MOSFETs
- < 0.5µs Reverse Turn-Off Time
- Precision Current Monitoring
- Adjustable Slew-Rate Control
- Adjustable Current-Limit Fault Delay
- Adjustable Circuit-Breaker Current Threshold
- Inrush Current Regulated at Startup
- Adjustable Undervoltage Lockout
- Small (4mm x 5mm) TQFN Package
MAX15068EVKIT Evaluation Kit for the MAX15068
The MAX15068 evaluation kit (EV kit) provides a proven design to evaluate the MAX15068 dual ORin...
- 4.8V to 18V Operating Voltage Range
- Banana Jacks for Input and Output Voltage
- Current Monitoring
- Programmable Slew-Rate Control
- Selectable Circuit-Breaker Threshold
- Configurable Undervoltage Lockout
- Adjustable Current-Limit Fault Delay
- Active-Low FAULT and PG Outputs
- Enable Input
- Proven PCB Layout
- Fully Assembled and Tested
MAX15096 2.7V to 18V, 6A Integrated Hot-Swap/Electronic Circuit Breaker
The MAX15096 family of devices are integrated solutions for hot-swap applications requiring the ...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 12mΩ (typ) Internal Power MOSFET
- Programmable Overvoltage Protection and Undervoltage-Lockout Threshold
- Drive-Present Signal Input (Active-Low PRSNT pin)
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Programmable Inrush Current Control Under SOA Operation
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15096) or Automatic Retry (MAX15096A) Options
- Safety Features Ensure Accurate, Robust Protection
- 6A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- IN-to-OUT Short-Circuit Detection
- Open-Drain PG Output
- Output Discharge After a Fault Event (MAX15096D Only)
- Programmable Additional Delay (2µs max) to Fast-Comparator Response Time
- Enable Input (EN)
MAX15096A 2.7V to 18V, 6A Integrated Hot-Swap/Electronic Circuit Breaker
The MAX15096 family of devices are integrated solutions for hot-swap applications requiring the ...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 12mΩ (typ) Internal Power MOSFET
- Programmable Overvoltage Protection and Undervoltage-Lockout Threshold
- Drive-Present Signal Input (Active-Low PRSNT pin)
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Programmable Inrush Current Control Under SOA Operation
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15096) or Automatic Retry (MAX15096A) Options
- Safety Features Ensure Accurate, Robust Protection
- 6A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- IN-to-OUT Short-Circuit Detection
- Open-Drain PG Output
- Output Discharge After a Fault Event (MAX15096D Only)
- Programmable Additional Delay (2µs max) to Fast-Comparator Response Time
- Enable Input (EN)
MAX5995BEVKIT Evaluation Kit for the MAX5995A, MAX5995B, MAX5995C, MAX5974D
The MAX5995 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board ...
- IEEE 802.3af/at/bt-Compliant PD Interface Circuit
- Multi-Event Classification 0-8
- -36V to -57V Input Range
- Demonstrates a 71W PD Design with Isolated Active-Clamped Forward Topology DC-DC Converter
- +12V Output at 5.5A
- Startup Inrush Current Limit of 135mA (typ)
- Current Limit During Normal Operation
- Evaluates Endspan and Midspan Ethernet Systems
- Type 1-4 PSE Classification Indicator
- Simplified Wall Adapter Interface
- Demonstrates Sleep and Ultra-Sleep Power-Saving Modes
- Proven PCB Layout
- Fully Assembled and Tested
MAX5977A 1V to 16V, Single-Channel, Hot-Swap Controllers with Precision Current-Sensing Output
The MAX5977A/MAX5977B hot-swap controllers provide complete protection for systems with a 1V to ...
- 1% Accurate Current-Sense Amplifier Output
- Hot-Swap Monitors Operation from 1V to 16V
- Integrated Charge Pump Fully Enhances the External n-Channel FET (VGATE = VIN + 5V)
- VariableSpeed/BiLevel™ Fault Protection Provides Electronic Circuit-Breaker Function
- Output Latched Off After Fault Condition (MAX5977A)
- Autoretry After Fault Condition (MAX5977B)
- Power-Good Indicator
- Calibration Mode
- Small, 20-Pin, 4mm x 4mm, TQFN-EP Package
MAX5977B 1V to 16V, Single-Channel, Hot-Swap Controllers with Precision Current-Sensing Output
The MAX5977A/MAX5977B hot-swap controllers provide complete protection for systems with a 1V to ...
- 1% Accurate Current-Sense Amplifier Output
- Hot-Swap Monitors Operation from 1V to 16V
- Integrated Charge Pump Fully Enhances the External n-Channel FET (VGATE = VIN + 5V)
- VariableSpeed/BiLevel™ Fault Protection Provides Electronic Circuit-Breaker Function
- Output Latched Off After Fault Condition (MAX5977A)
- Autoretry After Fault Condition (MAX5977B)
- Power-Good Indicator
- Calibration Mode
- Small, 20-Pin, 4mm x 4mm, TQFN-EP Package
MAX15090BEVKIT Evaluation Kit for the MAX15090B/MAX15090C
The MAX15090B/MAX15090C evaluation kits (EV kit) provide a proven design to evaluate the MAX1509...
- 2.7V to 18V Operating Voltage Range
- Up to 12A Configurable Load Current Capability
- Banana Jacks for Input and Output Voltage
- Programmable Slew-Rate Control
- Selectable/Configurable Circuit-Breaker Threshold
- Configurable Overvoltage/Undervoltage Lockout
- Programmable Timeout Delay
- Active-Low FAULT and PG Outputs
- Defined Safe Operation Area
- Proven PCB Layout
- Fully Assembled and Tested
MAX15090CEVKIT Evaluation Kit for the MAX15090B/MAX15090C
The MAX15090B/MAX15090C evaluation kits (EV kit) provide a proven design to evaluate the MAX1509...
- 2.7V to 18V Operating Voltage Range
- Up to 12A Configurable Load Current Capability
- Banana Jacks for Input and Output Voltage
- Programmable Slew-Rate Control
- Selectable/Configurable Circuit-Breaker Threshold
- Configurable Overvoltage/Undervoltage Lockout
- Programmable Timeout Delay
- Active-Low FAULT and PG Outputs
- Defined Safe Operation Area
- Proven PCB Layout
- Fully Assembled and Tested
MAX5924 1V to 13.2V, n-Channel Hot-Swap Controllers Require No Sense Resistor
The MAX5924/MAX5925/MAX5926 1V to 13.2V hot-swap controllers allow the safe insertion and remova...
- Hot Swap 1V to 13.2V with VCC > 2.25V
- Drive High-Side n-Channel MOSFET
- Operation With or Without RSENSE
- Temperature-Compensated RDS(ON) Sensing
- Protected During Turn-On into Shorted Load
- Adjustable Circuit-Breaker Threshold
- Programmable Slew-Rate Control
- Programmable Turn-On Voltage
- Autoretry or Latched Fault Management
- 10-Pin µMAX® or 16-Pin QSOP Packages
MAX15090B 2.7V to 18V, 12A, Hot-Swap Solution with Current Report Output
The MAX15090B/MAX15090C ICs are integrated solutions for hot-swap applications requiring the saf...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 6mΩ (typ) Internal Power MOSFET Overvoltage Protection
- Power-Good and Fault Outputs
- Programmable Undervoltage Lockout
- Current Reporting Without Need for External RSENSE
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff or Automatic Retry Options
- Safety Features Ensure Accurate, Robust Protection
- 12A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- Inrush Current Regulated at Startup with Foldback
- Implementation for di/dt Control
- IN-to-OUT Short-Circuit Detection
MAX15090C 2.7V to 18V, 12A, Hot-Swap Solution with Current Report Output
The MAX15090B/MAX15090C ICs are integrated solutions for hot-swap applications requiring the saf...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 6mΩ (typ) Internal Power MOSFET Overvoltage Protection
- Power-Good and Fault Outputs
- Programmable Undervoltage Lockout
- Current Reporting Without Need for External RSENSE
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff or Automatic Retry Options
- Safety Features Ensure Accurate, Robust Protection
- 12A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- Inrush Current Regulated at Startup with Foldback
- Implementation for di/dt Control
- IN-to-OUT Short-Circuit Detection
MAX15093AEVKIT Evaluation Kit for the MAX15093/MAX15093A
The MAX15093/MAX15093A evaluation kits (EV kits) provide a proven design to evaluate the MAX1509...
- 2.7V to 18V Operating-Voltage Range
- Up to 15A Configurable Load-Current Capability
- Banana Jacks for Input and Output Voltage
- Programmable Slew-Rate Control
- Selectable/Configurable Circuit-Breaker Threshold
- Configurable Overvoltage/Undervoltage Lockout
- Programmable Timeout Delay
- FAULT and PG Outputs
- Defined Safe Operation Area
- Proven PCB Layout
- Fully Assembled and Tested
MAX15093EVKIT Evaluation Kit for the MAX15093/MAX15093A
The MAX15093/MAX15093A evaluation kits (EV kits) provide a proven design to evaluate the MAX1509...
- 2.7V to 18V Operating-Voltage Range
- Up to 15A Configurable Load-Current Capability
- Banana Jacks for Input and Output Voltage
- Programmable Slew-Rate Control
- Selectable/Configurable Circuit-Breaker Threshold
- Configurable Overvoltage/Undervoltage Lockout
- Programmable Timeout Delay
- FAULT and PG Outputs
- Defined Safe Operation Area
- Proven PCB Layout
- Fully Assembled and Tested
MAX15093 2.7V to 18V, 15A, Hot-Swap Solution with Current Report Output
The MAX15093/MAX15093A ICs are integrated solutions for hot-swap applications requiring the safe...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 3.8mΩ (typ) Internal Power MOSFET Overvoltage Protection
- Power-Good and Fault Outputs
- Programmable Undervoltage Lockout
- Current Reporting Without Need for External RSENSE
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15093) or Automatic Retry (MAX15093A) Options
- Safety Features Ensure Accurate, Robust Protection
- 15A Continuous Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- Inrush Current Regulated at Startup with Foldback
- Implementation for di/dt Control
- IN-to-OUT Short-Circuit Detection
MAX15093A 2.7V to 18V, 15A, Hot-Swap Solution with Current Report Output
The MAX15093/MAX15093A ICs are integrated solutions for hot-swap applications requiring the safe...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 3.8mΩ (typ) Internal Power MOSFET Overvoltage Protection
- Power-Good and Fault Outputs
- Programmable Undervoltage Lockout
- Current Reporting Without Need for External RSENSE
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15093) or Automatic Retry (MAX15093A) Options
- Safety Features Ensure Accurate, Robust Protection
- 15A Continuous Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- Inrush Current Regulated at Startup with Foldback
- Implementation for di/dt Control
- IN-to-OUT Short-Circuit Detection
MAX15095AEVKIT Evaluation Kit for the MAX15095A/MAX15095/MAX15095D
The MAX15095A evaluation kit (EV kit) provides a proven design to evaluate the MAX15095A hot-swa...
- 2.7V to 18V Operating Voltage Range
- Up to 6.6A Configurable Load Current Capability
- Banana Jacks for Input and Output Voltage
- Programmable Slew-Rate Control
- Selectable/Configurable Circuit-Breaker Threshold
- Configurable Overvoltage/Undervoltage Lockout
- Programmable Fast Comparator Response
- PG Output
- Defined Safe Operation Area
- Proven PCB Layout
- Fully Assembled and Tested
MAX15095D 2.7V to 18V, 6.6A Integrated Hot-Swap/Electronic Circuit Breaker
The MAX15095 family of devices are integrated solutions for hot-swap applications requiring the ...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 10.6mΩ (typ) Internal Power MOSFET
- Programmable Overvoltage Protection and Undervoltage-Lockout Threshold
- Drive-Present Signal Input (Active-Low PRSNT pin)
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Programmable Inrush Current Control Under SOA Operation
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15095) or Automatic Retry (MAX15095A) Options
- Safety Features Ensure Accurate, Robust Protection
- 6.6A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- IN-to-OUT Short-Circuit Detection
- Open-Drain PG Output
- Output Discharge After a Fault Event (MAX15095D Only)
- Programmable Additional Delay (2µs max) to Fast-Comparator Response Time
- Enable Input (EN)
MAX15095 2.7V to 18V, 6.6A Integrated Hot-Swap/Electronic Circuit Breaker
The MAX15095 family of devices are integrated solutions for hot-swap applications requiring the ...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 10.6mΩ (typ) Internal Power MOSFET
- Programmable Overvoltage Protection and Undervoltage-Lockout Threshold
- Drive-Present Signal Input (Active-Low PRSNT pin)
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Programmable Inrush Current Control Under SOA Operation
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15095) or Automatic Retry (MAX15095A) Options
- Safety Features Ensure Accurate, Robust Protection
- 6.6A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- IN-to-OUT Short-Circuit Detection
- Open-Drain PG Output
- Output Discharge After a Fault Event (MAX15095D Only)
- Programmable Additional Delay (2µs max) to Fast-Comparator Response Time
- Enable Input (EN)
MAX15095A 2.7V to 18V, 6.6A Integrated Hot-Swap/Electronic Circuit Breaker
The MAX15095 family of devices are integrated solutions for hot-swap applications requiring the ...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 10.6mΩ (typ) Internal Power MOSFET
- Programmable Overvoltage Protection and Undervoltage-Lockout Threshold
- Drive-Present Signal Input (Active-Low PRSNT pin)
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Programmable Inrush Current Control Under SOA Operation
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15095) or Automatic Retry (MAX15095A) Options
- Safety Features Ensure Accurate, Robust Protection
- 6.6A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- IN-to-OUT Short-Circuit Detection
- Open-Drain PG Output
- Output Discharge After a Fault Event (MAX15095D Only)
- Programmable Additional Delay (2µs max) to Fast-Comparator Response Time
- Enable Input (EN)
MAX15068 Dual ORing, Single Hot-Swap Controller with Accurate Current Monitoring
The MAX15068 offers ORing function and hot-swap features for two input-supply-rail applications ...
- 2.9V to 18V Operating Voltage Range (ORing and Hot Swap)
- Seamless Power Transition of Redundant Supplies
- Controls n-Channel MOSFETs
- < 0.5µs Reverse Turn-Off Time
- Precision Current Monitoring
- Adjustable Slew-Rate Control
- Adjustable Current-Limit Fault Delay
- Adjustable Circuit-Breaker Current Threshold
- Inrush Current Regulated at Startup
- Adjustable Undervoltage Lockout
- Small (4mm x 5mm) TQFN Package
MAX15068EVKIT Evaluation Kit for the MAX15068
The MAX15068 evaluation kit (EV kit) provides a proven design to evaluate the MAX15068 dual ORin...
- 4.8V to 18V Operating Voltage Range
- Banana Jacks for Input and Output Voltage
- Current Monitoring
- Programmable Slew-Rate Control
- Selectable Circuit-Breaker Threshold
- Configurable Undervoltage Lockout
- Adjustable Current-Limit Fault Delay
- Active-Low FAULT and PG Outputs
- Enable Input
- Proven PCB Layout
- Fully Assembled and Tested
MAX15096 2.7V to 18V, 6A Integrated Hot-Swap/Electronic Circuit Breaker
The MAX15096 family of devices are integrated solutions for hot-swap applications requiring the ...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 12mΩ (typ) Internal Power MOSFET
- Programmable Overvoltage Protection and Undervoltage-Lockout Threshold
- Drive-Present Signal Input (Active-Low PRSNT pin)
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Programmable Inrush Current Control Under SOA Operation
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15096) or Automatic Retry (MAX15096A) Options
- Safety Features Ensure Accurate, Robust Protection
- 6A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- IN-to-OUT Short-Circuit Detection
- Open-Drain PG Output
- Output Discharge After a Fault Event (MAX15096D Only)
- Programmable Additional Delay (2µs max) to Fast-Comparator Response Time
- Enable Input (EN)
MAX15096A 2.7V to 18V, 6A Integrated Hot-Swap/Electronic Circuit Breaker
The MAX15096 family of devices are integrated solutions for hot-swap applications requiring the ...
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 12mΩ (typ) Internal Power MOSFET
- Programmable Overvoltage Protection and Undervoltage-Lockout Threshold
- Drive-Present Signal Input (Active-Low PRSNT pin)
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Programmable Inrush Current Control Under SOA Operation
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15096) or Automatic Retry (MAX15096A) Options
- Safety Features Ensure Accurate, Robust Protection
- 6A (max) Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- IN-to-OUT Short-Circuit Detection
- Open-Drain PG Output
- Output Discharge After a Fault Event (MAX15096D Only)
- Programmable Additional Delay (2µs max) to Fast-Comparator Response Time
- Enable Input (EN)
MAX5995BEVKIT Evaluation Kit for the MAX5995A, MAX5995B, MAX5995C, MAX5974D
The MAX5995 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board ...
- IEEE 802.3af/at/bt-Compliant PD Interface Circuit
- Multi-Event Classification 0-8
- -36V to -57V Input Range
- Demonstrates a 71W PD Design with Isolated Active-Clamped Forward Topology DC-DC Converter
- +12V Output at 5.5A
- Startup Inrush Current Limit of 135mA (typ)
- Current Limit During Normal Operation
- Evaluates Endspan and Midspan Ethernet Systems
- Type 1-4 PSE Classification Indicator
- Simplified Wall Adapter Interface
- Demonstrates Sleep and Ultra-Sleep Power-Saving Modes
- Proven PCB Layout
- Fully Assembled and Tested
MAX5977A 1V to 16V, Single-Channel, Hot-Swap Controllers with Precision Current-Sensing Output
The MAX5977A/MAX5977B hot-swap controllers provide complete protection for systems with a 1V to ...
- 1% Accurate Current-Sense Amplifier Output
- Hot-Swap Monitors Operation from 1V to 16V
- Integrated Charge Pump Fully Enhances the External n-Channel FET (VGATE = VIN + 5V)
- VariableSpeed/BiLevel™ Fault Protection Provides Electronic Circuit-Breaker Function
- Output Latched Off After Fault Condition (MAX5977A)
- Autoretry After Fault Condition (MAX5977B)
- Power-Good Indicator
- Calibration Mode
- Small, 20-Pin, 4mm x 4mm, TQFN-EP Package
MAX5977B 1V to 16V, Single-Channel, Hot-Swap Controllers with Precision Current-Sensing Output
The MAX5977A/MAX5977B hot-swap controllers provide complete protection for systems with a 1V to ...
- 1% Accurate Current-Sense Amplifier Output
- Hot-Swap Monitors Operation from 1V to 16V
- Integrated Charge Pump Fully Enhances the External n-Channel FET (VGATE = VIN + 5V)
- VariableSpeed/BiLevel™ Fault Protection Provides Electronic Circuit-Breaker Function
- Output Latched Off After Fault Condition (MAX5977A)
- Autoretry After Fault Condition (MAX5977B)
- Power-Good Indicator
- Calibration Mode
- Small, 20-Pin, 4mm x 4mm, TQFN-EP Package
MAX15090BEVKIT Evaluation Kit for the MAX15090B/MAX15090C
The MAX15090B/MAX15090C evaluation kits (EV kit) provide a proven design to evaluate the MAX1509...
- 2.7V to 18V Operating Voltage Range
- Up to 12A Configurable Load Current Capability
- Banana Jacks for Input and Output Voltage
- Programmable Slew-Rate Control
- Selectable/Configurable Circuit-Breaker Threshold
- Configurable Overvoltage/Undervoltage Lockout
- Programmable Timeout Delay
- Active-Low FAULT and PG Outputs
- Defined Safe Operation Area
- Proven PCB Layout
- Fully Assembled and Tested
MAX15090CEVKIT Evaluation Kit for the MAX15090B/MAX15090C
The MAX15090B/MAX15090C evaluation kits (EV kit) provide a proven design to evaluate the MAX1509...
- 2.7V to 18V Operating Voltage Range
- Up to 12A Configurable Load Current Capability
- Banana Jacks for Input and Output Voltage
- Programmable Slew-Rate Control
- Selectable/Configurable Circuit-Breaker Threshold
- Configurable Overvoltage/Undervoltage Lockout
- Programmable Timeout Delay
- Active-Low FAULT and PG Outputs
- Defined Safe Operation Area
- Proven PCB Layout
- Fully Assembled and Tested
MAX5924 1V to 13.2V, n-Channel Hot-Swap Controllers Require No Sense Resistor
The MAX5924/MAX5925/MAX5926 1V to 13.2V hot-swap controllers allow the safe insertion and remova...
- Hot Swap 1V to 13.2V with VCC > 2.25V
- Drive High-Side n-Channel MOSFET
- Operation With or Without RSENSE
- Temperature-Compensated RDS(ON) Sensing
- Protected During Turn-On into Shorted Load
- Adjustable Circuit-Breaker Threshold
- Programmable Slew-Rate Control
- Programmable Turn-On Voltage
- Autoretry or Latched Fault Management
- 10-Pin µMAX® or 16-Pin QSOP Packages
Share
Request a Quote