MAX14913

Octal High-Speed, High-Side Switch/Push-Pull Driver

Industry's Most Robust and Fastest 24V Driver, Capable of 200kHz Switching Rate, Improves Factory Throughput


Description

The MAX14912/MAX14913 have eight 640mA smart high-side switches that can also be configured as push-pull drivers for high-speed switching. The propagation delay from input to switching of the high-side/low-side drivers is 1µs (max). Each high-side driver has a low on-resistance of 230mΩ (max) at 500mA load current at TA = 125°C.

The device is configured and controlled either through pins or the SPI interface. The SPI interface is daisy-chainable, which allows efficient cascading of multiple devices. SPI also supports command mode, for the highest detailed diagnostic information. The MAX14912 allows configuration through SPI in parallel and serial setting modes, while the MAX14913 only supports configuration through SPI in serial setting mode.

Open-load detection in high-side mode detects both open-wire conditions in the switch on/off states, and LED drivers provide indication of per-channel fault and status conditions. Internal active clamps accelerate the shutdown of inductive loads fast in high-side mode.

The MAX14912/MAX14913 are available in a 56-pin QFN 8mm x 8mm package.
MAX14912, MAX14913: Functional (or Block) Diagram MAX14912, MAX14913: Functional (or Block) Diagram Enlarge+

Key Features

  • Low Power and Heat Dissipation
    • 230mΩ (max) High-Side RON at TA = 125°C
    • High-Efficiency 5V/100mA Buck Regulator
  • Fast Switching Ideal for High-Speed Control Systems
    • 0.1µs (typ.) Propagation Delay (High-Side Mode)
    • 0.5µs (typ.) Propagation Delay (Push-Pull Mode)
    • 200kHz Switching-Rate Capability in Push-Pull Mode
    • Fast Inductive Load Demagnetization
  • Robust Operation
    • 60V Abs Max VDD Rating
    • Safe-Demagnetization: Turn-Off of Unlimited Inductance
    • IEC61000-4-2 8kV Air Gap/6kV Contact ESD Protection
    • ±1kV/42Ω Surge Protection with TVS on VDD
    • Robust SPI Interface with Watchdog and CRC
    • -40°C to +125°C Ambient Operating Temperature Range
  • Extensive Diagnostics Reduces System Downtime
    • Per Driver and Chip Thermal Shutdown
    • Open-Wire Detection in High-Side Mode
    • Low Supply Voltage Warning
    • Undervoltage Detection
    • Overvoltage Detection on OUT
    • Overcurrent Detection
    • LED Drivers for Visual Fault and Output State Indication
  • Flexible Interface for Ease of Design
    • Serial and/or Parallel Control Interface
    • Per-Channel Configuration and Monitoring
    • Wide Logic Voltage Range (1.6V to 5.5V)
  • Small Package and High Integration Enables Compact High-Density I/O Modules
    • 56-Pin QFN 8mm x 8mm Package
    • Eight High-Side Switches/Push-Pull Drivers
    • Daisy-Chainable SPI Interface

Applications/Uses

  • Building Automation
  • Industrial Digital Outputs
  • PLC Systems
Part Number No. of Drivers Logic Polarity Config. IOUT
(A)
VSUPPLY
(V)
Package/Pins Oper. Temp.
(°C)
Budgetary
Price
peak See Notes
MAX14913 NEW! 8 Noninverting Push-Pull 0.5 10 to 36
QFN/56
-40 to +125 $6.95 @1k
See All MOSFET Drivers (38)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX14912EVKIT: Evaluation Kit for the MAX14912 and MAX14913
MAX14913EVKIT: Evaluation Kit for the MAX14912 and MAX14913
MAXREFDES150: MAXREFDES150#: Pocket IO PLC Development Platform

Technical Documents

App Note 6339 Digital Output Drivers: Understanding Key Features and Challenges

Quality and Environmental Data

Request Reliability Report for: MAX14913 
Lead-Free Package Tin (Sn) Whisker Reports

Tools & Models

Software
MAX14912EVKIT GUI

Related Resources


MAX14914
High-Side Switch with Settable Current-Limiting, Push-Pull Driver Option, and Digital Input Configuration

  • Reduces Power and Heat Dissipation
  • Enhances System Robustness
  • Reduces BOM Count and PCB Space

MAX14912
Octal High-Speed, High-Side Switch/Push-Pull Driver

  • Low Power and Heat Dissipation
  • Fast Switching Ideal for High-Speed Control Systems
  • Robust Operation

MAX14913
Octal High-Speed, High-Side Switch/Push-Pull Driver

  • Low Power and Heat Dissipation
  • Fast Switching Ideal for High-Speed Control Systems
  • Robust Operation