Top

nanoPower On/Off Controller with Programmable Sleep Time

Only Dynamic Sleep Timer with Power Savings Specs, Extends Battery Life up to 60%

Product Details

Key Features

Parametric specs for Pushbutton Debouncers, On/Off Controllers and Battery Freshness Seals
# Switch Inputs 1
Edge Triggered Falling Edge
Functions Clear
Interrupt
ON/OFF Controller
Programmable Sleep Time
Debounce Duration (ms) 40 to 90
Output Polarity Active Low
Output Type Open Drain
Switch Inputs (±V) (max) 60V
ESD Protect. (±kV) 40
ICC (µA) (max) 0.03
Oper. Temp. (°C) -40 to +125
Package/Pins THIN WLP/6
Parametric specs for Resets and Supervisors with Pushbutton Manual Reset Inputs
ICC (µA) (max) 0.03
Oper. Temp. (°C) -40 to +125
Package/Pins THIN WLP/6
Budgetary
Price (See Notes)
1.51
View Less

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.

Parameters

Parametric specs for Pushbutton Debouncers, On/Off Controllers and Battery Freshness Seals
# Switch Inputs 1
Edge Triggered Falling Edge
Functions Clear
Interrupt
ON/OFF Controller
Programmable Sleep Time
Debounce Duration (ms) 40 to 90
Output Polarity Active Low
Output Type Open Drain
Switch Inputs (±V) (max) 60V
ESD Protect. (±kV) 40
ICC (µA) (max) 0.03
Oper. Temp. (°C) -40 to +125
Package/Pins THIN WLP/6
Parametric specs for Resets and Supervisors with Pushbutton Manual Reset Inputs
ICC (µA) (max) 0.03
Oper. Temp. (°C) -40 to +125
Package/Pins THIN WLP/6
Budgetary
Price (See Notes)
1.51

Key Features

  • Ultra Low Current Saves Power
    • ​30nA IQ in SLEEP_TIMER State
    • 10nA IQ in SHUTDOWN State 
    • VCC Range: 1.7V to 5.5V
  • Robust Features Increases End Equipment Reliability
    • Pushbutton Input Handles up to ±60V
    • ±40kV HBM ESD Protection
  • Flexible Configurations Provide Design Options
    • I2C or Resistor Programmable Sleep Time
    • Interrupt Output and Clear Input in Resistor Programmable Configuration 
    • Up to 32 Different Sleep Time Values from 100ms to 24 Hours, and Infinite
    • Latched Output Supplies 200mA Load Current With Less Than 30mV Drop​​

Applications/Uses

  • Battery-Powered Equipment
  • Remote Sensors
  • Internet of Things (IoT)
  • Portable Instruments
  • Handheld Consumer Electronics
  • Industrial Equipment
  • Disposable Low-Power Electronics

Description

The MAX16163 and MAX16164 are nanopower on/off controllers with programmable sleep time. The devices integrate a power switch to gate an output, which provides up to 200mA load current.

The MAX16163/MAX16164 use either an external resistor to program the sleep time or program the sleep time through an I2C bus. When the device powers up, it checks the connection on the PB/SLP pin; if the resistance between the PB/SLP pin and ground is larger than 5.5MΩ, the device is configured as I2C programmable. Otherwise, the device is configured as resistor programmable.

When the MAX16163 powers up, it measures the resistance on the PB/SLP pin to the ground and sets the sleep time properly. It then asserts the OUT output. When the downstream device (e.g., a µC) finishes its task, it asserts a falling edge on the CLRB pin; the MAX16163 then deasserts OUT and the sleep timer starts. When the sleep timer expires, the MAX16163 asserts OUT again.

When the MAX16164 powers up, it measures the resistance on the PB/SLP pin to the ground and sets the sleep time properly. It then keeps OUT deasserted and puts the device in SHUTDOWN state. The MAX16164 does not assert OUT until a pushbutton closure on the PB/SLP pin.

The MAX16163/MAX16164 operate over the -40°C to +125°C temperature range and are available in a 1.54mm x 1.11mm, 6-bump thin wafer-level package (WLP) and a 6-pin µDFN package.

Simplified Block Diagram

MAX16163, MAX16164: Simplified Block Diagram MAX16163, MAX16164: Simplified Block Diagram Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.