MAX5064A

125V/2A, High-Speed, Half-Bridge MOSFET Drivers


Please check latest availability status for a specific part variant.

Description

The MAX5062/MAX5063/MAX5064 high-frequency, 125V half-bridge, n-channel MOSFET drivers drive high-and low-side MOSFETs in high-voltage applications. These drivers are independently controlled and their 35ns typical propagation delay, from input to output, are matched to within 3ns (typ). The high-voltage operation with very low and matched propagation delay between drivers, and high source/sink current capabilities in a thermally enhanced package make these devices suitable for the high-power, high-frequency telecom power converters. The 125V maximum input voltage range provides plenty of margin over the 100V input transient requirement of telecom standards. A reliable on-chip bootstrap diode connected between VDD and BST eliminates the need for an external discrete diode.

The MAX5062A/C and the MAX5063A/C offer both noninverting drivers (see the Selector Guide of the full data sheet). The MAX5062B/D and the MAX5063B/D offer a noninverting high-side driver and an inverting low-side driver. The MAX5064A/B offer two inputs per driver that can be either inverting or noninverting. The MAX5062A/B/C/D and the MAX5064A feature CMOS (VDD / 2) logic inputs. The MAX5063A/B/C/D and the MAX5064B feature TTL logic inputs. The MAX5064A/B include a break-before-make adjustment input that sets the dead time between drivers from 16ns to 95ns. The drivers are available in the industry-standard 8-pin SO footprint and pin configuration, and a thermally enhanced 8-pin SO and 12-pin (4mm x 4mm) thin QFN packages. All devices operate over the -40°C to +125°C automotive temperature range.
MAX5062, MAX5062A, MAX5063, MAX5063A, MAX5064, MAX5064A, MAX5064B: Typical Operating Circuit MAX5062, MAX5062A, MAX5063, MAX5063A, MAX5064, MAX5064A, MAX5064B: Typical Operating Circuit Enlarge+

Key Features

  • HIP2100/HIP2101 Pin Compatible (MAX5062A/MAX5063A)
  • Up to 125V Input Operation
  • 8V to 12.6V VDD Input Voltage Range
  • 2A Peak Source and Sink Current Drive Capability
  • 35ns Typical Propagation Delay
  • Guaranteed 8ns Propagation Delay Matching Between Drivers
  • Programmable Break-Before-Make Timing (MAX5064)
  • Up to 1MHz Combined Switching Frequency while Driving 100nC Gate Charge (MAX5064)
  • Available in CMOS (VDD / 2) or TTL Logic-Level Inputs with Hysteresis
  • Up to 15V Logic Inputs Independent of Input Voltage
  • Low 2.5pF Input Capacitance
  • Instant Turn-Off of Drivers During Fault or PWM Start-Stop Synchronization (MAX5064)
  • Low 200µA Supply Current
  • Versions Available With Combination of Noninverting and Inverting Drivers (MAX5062B/D and MAX5063B/D)
  • Available in 8-Pin SO, Thermally Enhanced SO,and 12-Pin Thin QFN Packages

Applications/Uses

  • Active-Clamp Forward Converters
  • Full-Bridge Converters
  • Motor Control
  • Power-Supply Modules
  • Telecom Half-Bridge Power Supplies
  • Two-Switch Forward Converters
Part NumberDriverDriverHigh Side Volt.
(V)
VSUPPLY
(V)
ISOURCE / ISINK
(A)
tPD
(ns)
Logic InputOper. Temp.
(°C)
Package/PinsBudgetary
Price
High SideLow SidetyppeaktypSee Notes
MAX5062A Non-InvertingNon-Inverting1258.0 to 12.62 / 230CMOS-40 to +125
SOIC(N)/8
$2.34 @1k
MAX5062B Non-InvertingInverting30CMOS
SOIC(N)/8
$2.95 @1k
MAX5062C Non-InvertingNon-Inverting30CMOS
SOIC(N)/8
$2.95 @1k
MAX5062D Non-InvertingInverting30CMOS
SOIC(N)/8
$2.34 @1k
MAX5063A Non-InvertingNon-Inverting35TTL
SOIC(N)/8
$4.59 @1k
MAX5063B Non-InvertingInverting35TTL
SOIC(N)/8
$2.34 @1k
MAX5063C Non-InvertingNon-Inverting35TTL
SOIC(N)/8
$2.68 @1k
MAX5063D Non-InvertingInverting35TTL
SOIC(N)/8
$4.59 @1k
MAX5064A 
Inverting
Non-Inverting
Inverting
Non-Inverting
30CMOS
SOIC(N)/8
$2.12 @1k
MAX5064B 
Inverting
Non-Inverting
Inverting
Non-Inverting
35TTL
SOIC(N)/8
$1.46 @1k
See All Full/Half-Bridge MOSFET Drivers (17)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Quality and Environmental Data

Request Reliability Report for: MAX5064A 
Lead-Free Package Tin (Sn) Whisker Reports

CAD Symbols and Footprints

  • MAX5064AATC+
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    Electronics in Vehicles (ELIV) 2019
    10/18/2019 - 10/19/2019, Bonn, Germany
    The international VDI Congress ELIV (Electronics In Vehicles) is THE event for all experts in the field of electrical and electronical car engineering and integration of mechanical and electronical systems.

    RSVP