Please check latest availability status for a specific part variant.
The MAX8902A/MAX8902B low-noise linear regulators deliver up to 500mA of output current with only 16µVRMS of output noise in a 100kHz bandwidth. These regulators maintain their output voltage over a wide input range, requiring only 100mV of input-to-output headroom at full load.
These LDOs maintain a low 80µA typical supply current, independent of the load current and dropout voltage. The regulator control circuitry includes a programmable soft-start circuit and short circuit, reverse current, and thermal-overload protection. Other features include an enable input and a power-OK output (MAX8902B only).
The MAX8902A output voltage can be set to 1.5V, 1.8V, 2.0V, 2.5V, 3.0V, 3.1V, 3.3V, 4.6V, or 4.7V using the SELA and SELB inputs. The MAX8902B output voltage can be set between 0.6V and 5.3V with an external resistor voltage-divider.
Part Number | Regulators | VIN (V) | VIN (V) | Preset VOUT (V) | Adj. VOUT (V) | Adj. VOUT (V) | VDROPOUT @Rated ILOAD (V) | Rated ILOAD (mA) | Rated ILOAD (mA) | ICC (µA) | Output Voltage Noise (µV RMS) | Ref. Bypass | Low Batt./ Pwr. Fail Out | POK/Reset Thresh. (V) | Watchdog | Reverse Batt. Protect. | Oper. Temp. (°C) | Package/Pins | Budgetary Price | ||||||||||||||
min | max | min | max | typ | max | typ | nom | See Notes | |||||||||||||||||||||||||
MAX8902 | 1 | 1.7 | 5.5 |
| 0.6 | 5.3 | 0.05 | 500 | 500 | 120 | 16 | Yes | No | Vout-9% | No | No | -40 to +125 |
| $1.33 @1k | ||||||||||||||
See All Linear Regulators (145) | |||||||||||||||||||||||||||||||||
Pricing Notes: This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor. |
Device | Fab Process | Technology | Sample size | Rejects | FIT at 25°C | FIT at 55°C |
Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.
Quality Management System >
Environmental Management System >