Top

5V/3.3V or Adjustable, Low-Dropout, Low-IQ, 200mA Linear Regulator with Standby Mode

250mA LDOs Consume Just 11µA at Any Load and in Dropout

Product Details

The MAX882/MAX883/MAX884 linear regulators maximize battery life by combining ultra-low supply currents and low dropout voltages. They feature 200mA output current capability at up to +125°C junction temperature and come in a 1.5W SOIC package. The 1.5W package (compared to 0.47W for standard SOIC packages) allows a wider operating range for the input voltage and output current. The MAX882/MAX883/MAX884 use a p-channel MOSFET pass transistor to maintain a low 11µA (15µA max) supply current from no-load to the full 200mA output. Unlike earlier bipolar regulators, there are no PNP base current losses that increase with output current. In dropout, the MOSFET does not suffer from excessive base currents that occur when PNP transistors go into saturation. Typical dropout voltages are 220mV at 5V and 200mA, or 320mV at 3.3V and 200mA.

The MAX882 features a 7µA standby mode that disables the output but keeps the reference, low-battery comparator, and biasing circuitry alive. The MAX883/MAX884 feature a shutdown (OFF) mode that turns off all circuitry, reducing supply current to less than 1µA. All three devices include a low-battery-detection comparator, fold-back current limiting, reverse-current protection, and thermal-overload protection.

The output is preset at 3.3V for the MAX882/MAX884 and 5V for the MAX883. In addition, all devices employ Dual Mode™ operation, allowing user-adjustable outputs from 1.25V to 11V using external resistors. The input voltage supply range is 2.7V to 11.5V.

For low-dropout linear regulators with output currents up to 500mA, refer to the MAX603/MAX604 data sheet.

Key Features

  • Foldback Current Limiting
  • High-Power (1.5W) 8-Pin SO Package
  • Dual Mode Operation: Fixed or Adjustable Output from 1.25V to 11V
  • Large Input Range (2.7V to 11.5V)
  • Internal 1.1Ω p-Channel Pass Transistor Draws No Base Current
  • Low 220mV Dropout Voltage at 200mA Output Current
  • 11µA (typ) Quiescent Current
  • 1µA (max) Shutdown Mode or 7µA (typ) Standby Mode
  • Low-Battery Detection Comparator
  • Reverse-Current Protection
  • Thermal-Overload Protection

Applications/Uses

  • 1.25V to 11V Adjustable Regulators
  • 3.3V and 5V Regulators
  • Automotive Electronics
  • High-Efficiency Linear Regulators
  • Pagers and Cell Phones
  • Portable Instrumentation
  • Solar-Powered Instruments
Parametric specs for Linear Regulators
VIN (V) (min) 2.7
VIN (V) (max) 11.5
Adj. VOUT (V) (min) 1.25
Adj. VOUT (V) (max) 11
Rated ILOAD (mA) 200
Preset VOUT (V) 3.3
# Regulators 1
VDROPOUT @Rated ILOAD (V) (typ) 0.32
ICC (µA) (max) 15
Output Voltage Noise (µV RMS) (typ) 250
Ref. Bypass No
Low Batt./ Pwr. Fail Out Yes
Watchdog No
Reverse Batt. Protect. No
Oper. Temp. (°C) -40 to +85
0 to +70
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes)
$1.81 @1k
View More

Simplified Block Diagram

MAX882, MAX883, MAX884: Typical Operating Circuit MAX882, MAX883, MAX884: Typical Operating Circuit Zoom icon

Technical Docs

Design & Development

Click any title below to view the detail page where available.

/en/design/design-tools/ee-sim.html?

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal

Parameters

Parametric specs for Linear Regulators
VIN (V) (min) 2.7
VIN (V) (max) 11.5
Adj. VOUT (V) (min) 1.25
Adj. VOUT (V) (max) 11
Rated ILOAD (mA) 200
Preset VOUT (V) 3.3
# Regulators 1
VDROPOUT @Rated ILOAD (V) (typ) 0.32
ICC (µA) (max) 15
Output Voltage Noise (µV RMS) (typ) 250
Ref. Bypass No
Low Batt./ Pwr. Fail Out Yes
Watchdog No
Reverse Batt. Protect. No
Oper. Temp. (°C) -40 to +85
0 to +70
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes)
$1.81 @1k

Key Features

  • Foldback Current Limiting
  • High-Power (1.5W) 8-Pin SO Package
  • Dual Mode Operation: Fixed or Adjustable Output from 1.25V to 11V
  • Large Input Range (2.7V to 11.5V)
  • Internal 1.1Ω p-Channel Pass Transistor Draws No Base Current
  • Low 220mV Dropout Voltage at 200mA Output Current
  • 11µA (typ) Quiescent Current
  • 1µA (max) Shutdown Mode or 7µA (typ) Standby Mode
  • Low-Battery Detection Comparator
  • Reverse-Current Protection
  • Thermal-Overload Protection

Applications/Uses

  • 1.25V to 11V Adjustable Regulators
  • 3.3V and 5V Regulators
  • Automotive Electronics
  • High-Efficiency Linear Regulators
  • Pagers and Cell Phones
  • Portable Instrumentation
  • Solar-Powered Instruments

Description

The MAX882/MAX883/MAX884 linear regulators maximize battery life by combining ultra-low supply currents and low dropout voltages. They feature 200mA output current capability at up to +125°C junction temperature and come in a 1.5W SOIC package. The 1.5W package (compared to 0.47W for standard SOIC packages) allows a wider operating range for the input voltage and output current. The MAX882/MAX883/MAX884 use a p-channel MOSFET pass transistor to maintain a low 11µA (15µA max) supply current from no-load to the full 200mA output. Unlike earlier bipolar regulators, there are no PNP base current losses that increase with output current. In dropout, the MOSFET does not suffer from excessive base currents that occur when PNP transistors go into saturation. Typical dropout voltages are 220mV at 5V and 200mA, or 320mV at 3.3V and 200mA.

The MAX882 features a 7µA standby mode that disables the output but keeps the reference, low-battery comparator, and biasing circuitry alive. The MAX883/MAX884 feature a shutdown (OFF) mode that turns off all circuitry, reducing supply current to less than 1µA. All three devices include a low-battery-detection comparator, fold-back current limiting, reverse-current protection, and thermal-overload protection.

The output is preset at 3.3V for the MAX882/MAX884 and 5V for the MAX883. In addition, all devices employ Dual Mode™ operation, allowing user-adjustable outputs from 1.25V to 11V using external resistors. The input voltage supply range is 2.7V to 11.5V.

For low-dropout linear regulators with output currents up to 500mA, refer to the MAX603/MAX604 data sheet.

Simplified Block Diagram

MAX882, MAX883, MAX884: Typical Operating Circuit MAX882, MAX883, MAX884: Typical Operating Circuit Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal