Top

MAX8564, MAX8564A

±1%, Ultra-Low Output Voltage, Dual and Triple Linear n-FET Controllers

Product Details

Key Features

Parametric specs for Linear Regulators
VIN (V) (min) 4.5
VIN (V) (max) 13.2
Adj. VOUT (V) (min) 0.5
Adj. VOUT (V) (max) 5
Rated ILOAD (mA) 3000
# Regulators 2
VDROPOUT @Rated ILOAD (V) (typ) 0.056
ICC (µA) (max) 1200
Low Batt./ Pwr. Fail Out No
POK/Reset Thresh. (V) (nom) Vout-12%
Watchdog No
Reverse Batt. Protect. No
Oper. Temp. (°C) -40 to +85
Package/Pins UMAX/10
Budgetary
Price (See Notes)
1.89
View Less

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.

Parameters

Parametric specs for Linear Regulators
VIN (V) (min) 4.5
VIN (V) (max) 13.2
Adj. VOUT (V) (min) 0.5
Adj. VOUT (V) (max) 5
Rated ILOAD (mA) 3000
# Regulators 2
VDROPOUT @Rated ILOAD (V) (typ) 0.056
ICC (µA) (max) 1200
Low Batt./ Pwr. Fail Out No
POK/Reset Thresh. (V) (nom) Vout-12%
Watchdog No
Reverse Batt. Protect. No
Oper. Temp. (°C) -40 to +85
Package/Pins UMAX/10
Budgetary
Price (See Notes)
1.89

Key Features

  • MAX8563: 3 Outputs
  • MAX8564/MAX8564A: 2 Outputs
  • ±1% Feedback Regulation
  • Adjustable Output Voltage Down to 0.5V
  • Can Use Ceramic Output Capacitors
  • Wide Supply Voltage Range Permits Operation from 5V or 12V Rails
  • Individual Enable Control and POK Signal Allows Sequencing
  • Overload Protection Against Soft Short-Circuit Condition
  • Undervoltage Short-Circuit Protection
  • Drive n-Channel MOSFETs

Applications/Uses

  • Desknotes and Notebooks
  • Dual/Triple Power Supplies
  • Graphic Cards
  • Low-Voltage DSP, µP, and Microcontroller Power Supplies
  • Motherboards
  • Ultra-Low-Dropout Voltage Regulators

Description

The MAX8563/MAX8564/MAX8564A ultra-low-output dual and triple LDO controllers allow flexible and inexpensive point-of-load voltage conversion in motherboards, desknotes, notebooks, and other applications.

These parts feature a 0.5V reference voltage with ±1% accuracy providing tight regulation of the output voltage. The MAX8563 has three n-channel MOSFET controller outputs, and the MAX8564/MAX8564A has two controller outputs.

Each controller output is adjustable from 0.5V to 3.3V when VDD = 12V and between 0.5V and 1.8V when VDD = 5V. Each output is independently enabled and asserts a POK signal when the output reaches 94% of the set value. Each output is protected against a soft short-circuit condition by an undervoltage comparator that disables the output when it drops to under 80% of the set voltage for more than 50µs. For a catastrophic short condition, the regulators are shut down immediately if the output drops below 60% of the set voltage.

The MAX8563 is available in a 16-pin QSOP package, and the MAX8564/MAX8564A are available in a 10-pin µMAX® package.

Simplified Block Diagram

MAX8563, MAX8564, MAX8564A: Typical Operating Circuit MAX8563, MAX8564, MAX8564A: Typical Operating Circuit Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.