Top

11µVRMS Low-Noise, 500mA LDO Linear Regulators with Low-Power Mode

Industry’s First 500mA LDO with Low-Power Mode Applied to Always-on Devices

Product Details

Key Features

Parametric specs for Linear Regulators
VIN (V) (min) 1.7
VIN (V) (max) 5.5
Adj. VOUT (V) (min) 0.8
Adj. VOUT (V) (max) 5
Rated ILOAD (mA) 500
# Regulators 1
VDROPOUT @Rated ILOAD (V) (typ) 0.05
ICC (µA) (max) 50
Output Voltage Noise (µV RMS) (typ) 11
Ref. Bypass Yes
POK/Reset Thresh. (V) (nom) Vout-9%
Reverse Batt. Protect. Yes
Oper. Temp. (°C) -40 to +125
Package/Pins TDFN-CU/8
Budgetary
Price (See Notes)
0.89
View Less

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.

Parameters

Parametric specs for Linear Regulators
VIN (V) (min) 1.7
VIN (V) (max) 5.5
Adj. VOUT (V) (min) 0.8
Adj. VOUT (V) (max) 5
Rated ILOAD (mA) 500
# Regulators 1
VDROPOUT @Rated ILOAD (V) (typ) 0.05
ICC (µA) (max) 50
Output Voltage Noise (µV RMS) (typ) 11
Ref. Bypass Yes
POK/Reset Thresh. (V) (nom) Vout-9%
Reverse Batt. Protect. Yes
Oper. Temp. (°C) -40 to +125
Package/Pins TDFN-CU/8
Budgetary
Price (See Notes)
0.89

Key Features

  • Deliver Wide, Flexible Operating Range
    • 1.7V to 5.5V Input Supply Range
    • 0.8V to 5.0V Output Voltage Range
    • 500mA Maximum Output Current
    • 24.3mV Dropout at 500mA Load and 5.0V Input Voltage
    • 19.2µA No-Load Supply Current in Low-Power Mode
    • 332µA Supply Current in Normal Mode
    • <1µA Shutdown Supply Current
  • Reduce Noise and Improve Accuracy
    • 11µVRMS Output Noise, 10Hz to 100kHz
    • 70dB PSRR at 10kHz, 250mA Load Current, and 300mV Input and Output Voltage Separation
    • ±1% DC Accuracy over Load, Line, and Temperature Variations
  • Enable Ease-of-Use and Robust Protection
    • Stable with 2µF (Minimum Effective) Output Capacitance
    • Programmable Soft-Start Rate
    • Overcurrent and Overtemperature Protection
    • Reverse-Current Protection
    • Power-OK Output
  • Reduce Size and Improve Reliability
    • 1.42mm x 0.83mm, 3 x 2, 6-Bump, 0.4mm Pitch WLP
    • 2mm x 2mm, 8-Pin TDFN Package
    • -40°C to +125°C Operating Temperature

Applications/Uses

  • Digital Camera and Audio Devices
  • High-Performance Sensors for Portable Applications
  • Imaging and High-Frequency Sensors
  • IoT Sensors
  • Mobile Phones
  • Portable and Battery-Powered Equipment

Description

The MAX38911/MAX38912 are low-noise, high-PSRR PMOS linear regulators that deliver up to a 500mA load current with only 11µVRMS of output noise from 10Hz to 100kHz.

The regulators are fully protected from damage by internal circuitry that provides programmable inrush current limiting, output overcurrent limiting, reverse current limiting, and thermal overload protection.

The MAX38911 is available in WLP and TDFN packages and are default factory preprogrammed to an output voltage of 1.8V. Custom fixed-output voltage levels in the range of 0.8V to 5.0V in 50mV steps are also available, see Ordering Information.

MAX38912 provides enhanced flexibility with adjustable output voltage in the range of 0.8V to 5.0V by using two external feedback resistors.

The MAX38911ANT is packaged in a 1.42mm x 0.83mm, 3 x 2, 6-bump, 0.4mm pitch WLP, while the MAX38911ATA and MAX38912ATA are packaged in a 8-pin, 2mm x 2mm TDFN.

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.