The MAX17498A/MAX17498B/MAX17498C devices are current-mode fixed-frequency flyback/boost converters with a minimum number of external components. They contain all the control circuitry required to design wide input voltage isolated and nonisolated power supplies. The MAX17498A has its rising/falling undervoltage lockout (UVLO) thresholds optimized for universal offline (85V AC to 265V AC) applications, while the MAX17498B/MAX17498C support UVLO thresholds suitable to low-voltage DC-DC applications.
The switching frequency of the MAX17498A/MAX17498C is 250kHz, while that of the MAX17498B is 500kHz. These frequencies allow the use of tiny magnetic and filter components, resulting in compact, cost-effective power supplies. An EN/UVLO input allows the user to start the power supply precisely at the desired input voltage, while also functioning as an on/off pin. The OVI pin enables implementation of an input overvoltage-protection scheme that ensures that the converter shuts down when the DC input voltage exceeds the desired maximum value.
The devices incorporate a flexible error amplifier and an accurate reference voltage (REF) to enable the end user to regulate both positive and negative outputs. Programmable current limit allows proper sizing and protection of the primary switching FET. The devices support a maximum duty cycle greater than 92% and provide programmable slope compensation to allow optimization of control loop performance. The devices provide an open-drain PGOOD pin that serves as a power-good indicator and enters the high-impedance state to indicate that the flyback/boost converter is in regulation. An SS pin allows programmable soft-start time for the flyback/boost converter. Hiccup-mode overcurrent protection and thermal shutdown are provided to minimize dissipation under overcurrent and overtemperature fault conditions. The devices are available in a space-saving, 16-pin (3mm x 3mm) TQFN package with 0.5mm lead spacing.
|Part Number||Application (VIN)||VIN|
|250||49||0.036||3||-40 to +125|
|See All Isolated Power Supplies (25)|
|Output Adjust. Method||Power Good Signal||ICC|
|DC-DC Outputs||Oper. Freq.|
|See All Step-Up Switching Regulators (97)|
| Pricing Notes: |
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|Device||Fab Process||Technology||Sample size||Rejects||FIT at 25°C||FIT at 55°C|
|App Note||6262||RTD Measurement System Design Essentials|
|User Guide||5861||EE-SIM Design and Simulation Environment User Guide|
|App Note||5503||Using a Peak-Current-Mode Controller to Design a Boost Converter|
|System Board||6185||MAXREFDES67#: Universal Input Micro PLC|
|System Board||5984||MAXREFDES62#: RS-485 Communications Micro PLC Card|
|System Board||5983||MAXREFDES64#: 8-Channel, Digital-Input Micro PLC Card|
|System Board||5976||MAXREFDES63#: 8-Channel Digital Output Micro PLC Card|
|System Board||5952||MAXREFDES60#: 16-Bit Analog Output Micro PLC|
|System Board||5943||MAXREFDES61#: 16-Bit Four-Channel Analog Input Micro PLC Card|
|Evaluation Board||8044||MAX17498BBEVKIT Evaluation Kit for the MAX17498B|
|Evaluation Board||7774||MAX17498BEVKIT Evaluation Kit for the MAX17498B|