/
/
/
Battery Management 
/
Top
/content/maximintegrated/en/products/power/battery-management/usb-c 
Thanks to USB-C and USB power delivery, compact electronic devices can now be fed by a small, single, bidirectional cable that delivers data, video, and power. Although USB Type-C and USB power delivery are making electronic devices easier to manage for end users, complying with the protocol can involve multiple hardware components, complex software, as well as custom firmware development.
Our extensive portfolio of ICs for USB-C and USB power delivery designs provides high levels of integration and flexibility that engineers need to create compact, power-efficient electronics compatible with bidirectional data and power delivery requirements. Our portfolio includes chargers, converters, controllers, as well as power path and protection devices. that:
- Enable simple, robust, and flexible designs
- Reduce BOM costs and solution size
- Decrease development time
Featured Videos
Fast Charging with USB Power Delivery
10:13 March 15, 2021
How to Charge Your Battery with USB Type-C and BC1.2 Ports Using the MAX77860
6:30 July 06, 2020
USB-C Fundamentals
16:10 June 01, 2020
USB Type-C Charging Overview
2:16 July 14, 2020
Featured Products
| Part Number | Functionality | Description | Sample | Order | EV Kit |
|---|---|---|---|---|---|
| USB-C PD Controllers | |||||
| MAX77958 | PD Controller | USB Power Delivery Controller | Sample | Buy | Buy |
| USB-C Chargers | |||||
| MAX77961 | 2-3 Cell Buck-Boost Charger | 25VIN, 6AOUT 2-3 Cell Buck-Boost Charger with Integrated FETs for USB Power Delivery | Sample | Buy | Buy |
| MAX77960 | 2-3 Cell Buck-Boost Charger | 25VIN, 3AOUT 2-3 Cell Buck-Boost Charger with Integrated FETs for USB Power Delivery | Sample | Buy | Buy |
| MAX77976 | 1-Cell Buck Charger | 19VIN, 5.5AOUT I2C Configured 1-Cell Buck Charger with Integrated FETs for USB Power Delivery | Sample | Buy | Buy |
| MAX77975 | 1-Cell Buck Charger | 19VIN, 3.5AOUT I2C Configured 1-Cell Buck Charger with Integrated FETs for USB Power Delivery | Sample | Buy | Buy |
| MAX77860 | 1-Cell Buck Charger with Integrated USB Type-C | 14VIN, 3.15AOUT I2C Configured 1-Cell Buck Charger with Integrated FETs and USB Type-C Detection | Sample | Buy | Buy |
| MAX77757 | Autonomous Charger with JEITA | 3.15A USB Type-C Autonomous Charger with JEITA for 1-Cell Li-ion/LiFePO4 Batteries | Sample | Buy | Buy |
| MAX77751 | 1-Cell Buck Charger with Integrated USB Type-C | 14VIN, 3.15AOUT Resistor Configured 1-Cell Buck Charger with Integrated FETs and USB Type-C Detection | Sample | Buy | Buy |
| MAX77962 | 2-Cell Buck-Boost Charger | 25VIN, 3AOUT 2-3 Cell Buck-Boost Charger with Integrated FETs for USB Power Delivery | Sample | Buy | Buy |
| MAX14748 | Charger and CC Control with I2C Configuration | 1.5A USB-C Boost Charger with I2C for 2S Li+ Batteries | Sample | Buy | Buy |
| USB-C Power | |||||
| MAX77756 | Buck Converter | 500mA, Dual-Input Power Multiplexer (MUX), Input Supply 3.0V to 24V | Sample | Buy | Buy |
| MAX77596 | Buck Converter | 300mA, Input Supply 3.5V to 24V, 1.1μA Quiescent Current at No Load | Sample | Buy | Buy |
| USB-C Power Path and Protection | |||||
| MAX14727 | Protection | Dual-Input, Bidirectional Overvoltage Protector with Automatic Path Control | Sample | Buy | Buy |
| MAX20323 | Protection | USB Type-C CC-Pin Overvoltage Protector | Sample | Buy | Buy |
| MAX20328 | Protection | MUX Switch for USB Type-C Audio Adapter Accessories | Sample | Buy | Buy |
| MAX20333 | Protection | Adjustable Current-Limit Switch with Low-Power Mode | Sample | Buy | Buy |
| MAX20334 | Protection | Overvoltage and Surge-Protected Dual SPDT Data Line Switch | Sample | Buy | Buy |
Featured Reference Designs
MAXREFDES179# Reference Design Board
The MAXREFDES179 reference design is a complete Universal Serial Bus (USB) type-C PD solution fe...
MAXREFDES179# Reference Design Board
The MAXREFDES179 reference design is a complete Universal Serial Bus (USB) type-C PD solution fe...
Featured Evaluation Kits
MAX77976EVKIT Evaluation Kit for the MAX77975/MAX77976/MAX77958
The MAX77975/MAX77976 evaluation kit (EV kit) is a fully assembled and tested printed circuit bo...
- High-Efficiency Single-Cell Switching Charger
- Up to 5.5A Charging with MAX77976
- 91.2% Buck Efficiency at 4A, 12V Input
- +28V Absolute Maximum Input Voltage Rating
- 3.8V to 19V Input Operating Voltage Range
- Reverse Boost with Programmable Output Voltage Options Up to 12V
- Charge Status Output for LED
- Push-Button Input for Exiting from Ship Mode
- External Discharge FET Enable Output
- Dedicated Input for Suspend Mode (SUSPND)
- USB Type-C Standalone Controller Support Customizable Firmware
- USB Type-C Version 1.3 and PD 3.0 Compliant
- Sink/Source/DRP Port Support
- PPS Sink Support
- Fast Role Swap Initial Sink Support
- Integrated VCONN Switch with OCP
- Support Try.Sink
- Support BC1.2 Legacy Charger Detection
MAX77975EVKIT Evaluation Kit for the MAX77975/MAX77976/MAX77958
The MAX77975/MAX77976 evaluation kit (EV kit) is a fully assembled and tested printed circuit bo...
- High-Efficiency Single-Cell Switching Charger
- Up to 5.5A Charging with MAX77976
- 91.2% Buck Efficiency at 4A, 12V Input
- +28V Absolute Maximum Input Voltage Rating
- 3.8V to 19V Input Operating Voltage Range
- Reverse Boost with Programmable Output Voltage Options Up to 12V
- Charge Status Output for LED
- Push-Button Input for Exiting from Ship Mode
- External Discharge FET Enable Output
- Dedicated Input for Suspend Mode (SUSPND)
- USB Type-C Standalone Controller Support Customizable Firmware
- USB Type-C Version 1.3 and PD 3.0 Compliant
- Sink/Source/DRP Port Support
- PPS Sink Support
- Fast Role Swap Initial Sink Support
- Integrated VCONN Switch with OCP
- Support Try.Sink
- Support BC1.2 Legacy Charger Detection
MAX77958EVKIT-3S6 Evaluation Kit for the MAX77958, MAX77961
The MAX77958 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB)...
- High Voltage VBUS Range
- Short to V Protection on CC Pins
- Type-C Support and USB-PD Support
- Mode configuration: DFP/UFP/DRP
- Type-C rev1.3 and PD3.0 Compatible
- Cable Orientation and Power Role Detection
- Integrated VCONN Support Try.Snk State
- Support Audio
- Support Debug Accessory Sink/Source Mode
- FRS (Fast Role Swap) Initial Sink Support
- PPS (Programmable Power Supply) Sink Support
- Support BC1.2 Legacy/Proprietary Charger Detection
- Integrated D+/D- Switches
- MTP Memory for Storing Custom Configuration
- Moisture Detection and Corrosion Prevention
- Customization Script
- I2C Programmable Configuration
- I2C Master to Control External Charger or DC-DC Converter IC
- Nine Configurable GPIOs (GPIO6 for SID)
- External SuperSpeed Mux/Detection/IRQ
- EN/DISABLE External Power or FETs
- On-Board I2C Interface
- Windows 10 Compatible
- Proven PCB Layout
- Fully Assembled and Tested
MAX77958EVKIT-2S6 Evaluation Kit for the MAX77958, MAX77961
The MAX77958 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB)...
- High Voltage VBUS Range
- Short to V Protection on CC Pins
- Type-C Support and USB-PD Support
- Mode configuration: DFP/UFP/DRP
- Type-C rev1.3 and PD3.0 Compatible
- Cable Orientation and Power Role Detection
- Integrated VCONN Support Try.Snk State
- Support Audio
- Support Debug Accessory Sink/Source Mode
- FRS (Fast Role Swap) Initial Sink Support
- PPS (Programmable Power Supply) Sink Support
- Support BC1.2 Legacy/Proprietary Charger Detection
- Integrated D+/D- Switches
- MTP Memory for Storing Custom Configuration
- Moisture Detection and Corrosion Prevention
- Customization Script
- I2C Programmable Configuration
- I2C Master to Control External Charger or DC-DC Converter IC
- Nine Configurable GPIOs (GPIO6 for SID)
- External SuperSpeed Mux/Detection/IRQ
- EN/DISABLE External Power or FETs
- On-Board I2C Interface
- Windows 10 Compatible
- Proven PCB Layout
- Fully Assembled and Tested
MAX77961EVKIT-06 Evaluation Kit for the MAX77960/MAX77961
The MAX77960/MAX77961 evaluation kit (EV kit) is a fully assembled and tested surface-mount prin...
- Evaluates the MAX77960/MAX77961 USB Type-C Buck-Boost Chargers with Integrated FETs for 2S/3S Li-Ion Batteries
- Demonstrates 3.5V to 25.4V Input Operating Range
- Demonstrates Charging Up to 3A (MAX77960)/6A (MAX77961)
- Demonstrates USB-OTG Functionality
- Demonstrates JEITA Compliance with On-Board Dummy Thermistors
- Assembled and Tested
- I2C Serial Interface
MAX77960EVKIT-06 Evaluation Kit for the MAX77960/MAX77961
The MAX77960/MAX77961 evaluation kit (EV kit) is a fully assembled and tested surface-mount prin...
- Evaluates the MAX77960/MAX77961 USB Type-C Buck-Boost Chargers with Integrated FETs for 2S/3S Li-Ion Batteries
- Demonstrates 3.5V to 25.4V Input Operating Range
- Demonstrates Charging Up to 3A (MAX77960)/6A (MAX77961)
- Demonstrates USB-OTG Functionality
- Demonstrates JEITA Compliance with On-Board Dummy Thermistors
- Assembled and Tested
- I2C Serial Interface
MAX77958EVKIT-2S3 Evaluation Kit for the MAX77958/MAX77962
The MAX77958 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB)...
- High Voltage VBUS Range
- Short to VBUS Protection on CC Pins
- Type-C Support and USB-PD Support
- Mode configuration: DFP/UFP/DRP
- Type-C rev1.3 and PD3.0 Compatible
- Cable Orientation and Power Role Detection
- Integrated VCONN Switch with OCP
- Support Try.Snk State
- Support Audio
- Support Debug Accessory Sink/Source Mode
- FRS (Fast Role Swap) Initial Sink Support
- PPS (Programmable Power Supply) Sink Support
- Support BC1.2 Legacy/Proprietary Charger Detection
- Integrated D+/D- Switches
- MTP Memory for Storing Custom Configuration
- Moisture Detection and Corrosion Prevention
- Customization Script
- I2C Programmable Configuration
- I2C Master to Control External Charger or DC-DC Converter IC
- 9 Configurable GPIOs (GPIO6 for SID)
- External SuperSpeed Mux/Detection/IRQ
- EN/DISABLE External Power or FETs
- On-Board I2C Interface
- Windows 10 Compatible
- Proven PCB Layout
- Fully Assembled and Tested
MAX77962EVKIT-12 Evaluation Kit for the MAX77962
The MAX77962 evaluation kit (EV kit) is a fully assembled and tested surface-mount printed circu...
- Evaluates the MAX77962 USB Type-C Buck-Boost Charger with Integrated FETs for 2S Li-Ion Batteries
- Demonstrates 3.5V to 23V Input Operating Range
- Demonstrates Charging Up to 3.2A
- Demonstrates USB-OTG Functionality
- Demonstrates JEITA Compliance with On-Board Dummy Thermistors
- Assembled and Tested
- I2C Serial Interface
MAX20323EVKIT Evaluation Kit for the MAX20323/MAX20323A/MAX20323B/MAX20323C/MAX20323D/MAX20323E/MAX20323F/
The MAX20323 evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstr...
- 2.5V to 5.5V Operating Voltage Range
- Power LED Reading
- Proven PCB Layout
- Fully Assembled and Tested
MAX77976EVKIT Evaluation Kit for the MAX77975/MAX77976/MAX77958
The MAX77975/MAX77976 evaluation kit (EV kit) is a fully assembled and tested printed circuit bo...
- High-Efficiency Single-Cell Switching Charger
- Up to 5.5A Charging with MAX77976
- 91.2% Buck Efficiency at 4A, 12V Input
- +28V Absolute Maximum Input Voltage Rating
- 3.8V to 19V Input Operating Voltage Range
- Reverse Boost with Programmable Output Voltage Options Up to 12V
- Charge Status Output for LED
- Push-Button Input for Exiting from Ship Mode
- External Discharge FET Enable Output
- Dedicated Input for Suspend Mode (SUSPND)
- USB Type-C Standalone Controller Support Customizable Firmware
- USB Type-C Version 1.3 and PD 3.0 Compliant
- Sink/Source/DRP Port Support
- PPS Sink Support
- Fast Role Swap Initial Sink Support
- Integrated VCONN Switch with OCP
- Support Try.Sink
- Support BC1.2 Legacy Charger Detection
MAX77975EVKIT Evaluation Kit for the MAX77975/MAX77976/MAX77958
The MAX77975/MAX77976 evaluation kit (EV kit) is a fully assembled and tested printed circuit bo...
- High-Efficiency Single-Cell Switching Charger
- Up to 5.5A Charging with MAX77976
- 91.2% Buck Efficiency at 4A, 12V Input
- +28V Absolute Maximum Input Voltage Rating
- 3.8V to 19V Input Operating Voltage Range
- Reverse Boost with Programmable Output Voltage Options Up to 12V
- Charge Status Output for LED
- Push-Button Input for Exiting from Ship Mode
- External Discharge FET Enable Output
- Dedicated Input for Suspend Mode (SUSPND)
- USB Type-C Standalone Controller Support Customizable Firmware
- USB Type-C Version 1.3 and PD 3.0 Compliant
- Sink/Source/DRP Port Support
- PPS Sink Support
- Fast Role Swap Initial Sink Support
- Integrated VCONN Switch with OCP
- Support Try.Sink
- Support BC1.2 Legacy Charger Detection
MAX77958EVKIT-3S6 Evaluation Kit for the MAX77958, MAX77961
The MAX77958 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB)...
- High Voltage VBUS Range
- Short to V Protection on CC Pins
- Type-C Support and USB-PD Support
- Mode configuration: DFP/UFP/DRP
- Type-C rev1.3 and PD3.0 Compatible
- Cable Orientation and Power Role Detection
- Integrated VCONN Support Try.Snk State
- Support Audio
- Support Debug Accessory Sink/Source Mode
- FRS (Fast Role Swap) Initial Sink Support
- PPS (Programmable Power Supply) Sink Support
- Support BC1.2 Legacy/Proprietary Charger Detection
- Integrated D+/D- Switches
- MTP Memory for Storing Custom Configuration
- Moisture Detection and Corrosion Prevention
- Customization Script
- I2C Programmable Configuration
- I2C Master to Control External Charger or DC-DC Converter IC
- Nine Configurable GPIOs (GPIO6 for SID)
- External SuperSpeed Mux/Detection/IRQ
- EN/DISABLE External Power or FETs
- On-Board I2C Interface
- Windows 10 Compatible
- Proven PCB Layout
- Fully Assembled and Tested
MAX77958EVKIT-2S6 Evaluation Kit for the MAX77958, MAX77961
The MAX77958 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB)...
- High Voltage VBUS Range
- Short to V Protection on CC Pins
- Type-C Support and USB-PD Support
- Mode configuration: DFP/UFP/DRP
- Type-C rev1.3 and PD3.0 Compatible
- Cable Orientation and Power Role Detection
- Integrated VCONN Support Try.Snk State
- Support Audio
- Support Debug Accessory Sink/Source Mode
- FRS (Fast Role Swap) Initial Sink Support
- PPS (Programmable Power Supply) Sink Support
- Support BC1.2 Legacy/Proprietary Charger Detection
- Integrated D+/D- Switches
- MTP Memory for Storing Custom Configuration
- Moisture Detection and Corrosion Prevention
- Customization Script
- I2C Programmable Configuration
- I2C Master to Control External Charger or DC-DC Converter IC
- Nine Configurable GPIOs (GPIO6 for SID)
- External SuperSpeed Mux/Detection/IRQ
- EN/DISABLE External Power or FETs
- On-Board I2C Interface
- Windows 10 Compatible
- Proven PCB Layout
- Fully Assembled and Tested
MAX77961EVKIT-06 Evaluation Kit for the MAX77960/MAX77961
The MAX77960/MAX77961 evaluation kit (EV kit) is a fully assembled and tested surface-mount prin...
- Evaluates the MAX77960/MAX77961 USB Type-C Buck-Boost Chargers with Integrated FETs for 2S/3S Li-Ion Batteries
- Demonstrates 3.5V to 25.4V Input Operating Range
- Demonstrates Charging Up to 3A (MAX77960)/6A (MAX77961)
- Demonstrates USB-OTG Functionality
- Demonstrates JEITA Compliance with On-Board Dummy Thermistors
- Assembled and Tested
- I2C Serial Interface
MAX77960EVKIT-06 Evaluation Kit for the MAX77960/MAX77961
The MAX77960/MAX77961 evaluation kit (EV kit) is a fully assembled and tested surface-mount prin...
- Evaluates the MAX77960/MAX77961 USB Type-C Buck-Boost Chargers with Integrated FETs for 2S/3S Li-Ion Batteries
- Demonstrates 3.5V to 25.4V Input Operating Range
- Demonstrates Charging Up to 3A (MAX77960)/6A (MAX77961)
- Demonstrates USB-OTG Functionality
- Demonstrates JEITA Compliance with On-Board Dummy Thermistors
- Assembled and Tested
- I2C Serial Interface
MAX77958EVKIT-2S3 Evaluation Kit for the MAX77958/MAX77962
The MAX77958 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB)...
- High Voltage VBUS Range
- Short to VBUS Protection on CC Pins
- Type-C Support and USB-PD Support
- Mode configuration: DFP/UFP/DRP
- Type-C rev1.3 and PD3.0 Compatible
- Cable Orientation and Power Role Detection
- Integrated VCONN Switch with OCP
- Support Try.Snk State
- Support Audio
- Support Debug Accessory Sink/Source Mode
- FRS (Fast Role Swap) Initial Sink Support
- PPS (Programmable Power Supply) Sink Support
- Support BC1.2 Legacy/Proprietary Charger Detection
- Integrated D+/D- Switches
- MTP Memory for Storing Custom Configuration
- Moisture Detection and Corrosion Prevention
- Customization Script
- I2C Programmable Configuration
- I2C Master to Control External Charger or DC-DC Converter IC
- 9 Configurable GPIOs (GPIO6 for SID)
- External SuperSpeed Mux/Detection/IRQ
- EN/DISABLE External Power or FETs
- On-Board I2C Interface
- Windows 10 Compatible
- Proven PCB Layout
- Fully Assembled and Tested
MAX77962EVKIT-12 Evaluation Kit for the MAX77962
The MAX77962 evaluation kit (EV kit) is a fully assembled and tested surface-mount printed circu...
- Evaluates the MAX77962 USB Type-C Buck-Boost Charger with Integrated FETs for 2S Li-Ion Batteries
- Demonstrates 3.5V to 23V Input Operating Range
- Demonstrates Charging Up to 3.2A
- Demonstrates USB-OTG Functionality
- Demonstrates JEITA Compliance with On-Board Dummy Thermistors
- Assembled and Tested
- I2C Serial Interface
MAX20323EVKIT Evaluation Kit for the MAX20323/MAX20323A/MAX20323B/MAX20323C/MAX20323D/MAX20323E/MAX20323F/
The MAX20323 evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstr...
- 2.5V to 5.5V Operating Voltage Range
- Power LED Reading
- Proven PCB Layout
- Fully Assembled and Tested
Share
Request a Quote