MAX77860

USB Type-C, 3A Switch-Mode Buck Charger with Integrated CC Detection, Reverse Boost, and ADC

Industry's First USB Type-C Charger with Integrated CC Detection and BC1.2 Detection, Ease of Design in a Small Package


Please check latest availability status for a specific part variant.

Description

The MAX77860 is a high-performance single input switch mode charger that features USB Type-C CC detection capability in addition to reverse boost capability and a Safeout LDO.

This switched-mode battery charger with two integrated switches, provides small inductor and capacitor sizes, programmable battery charging current, and is ideally suited for portable devices such as smartphones, IoT devices, and other Li-ion battery powered electronics. The charger features a single input, which works for both USB and high voltage adapters. It supports USB Type-C CC detection under BC 1.2 specification, and the power-path switch is integrated in the chip. All MAX77860 blocks connected to the adapter/USB pin are protected from input overvoltage events up to 14V. The USB-OTG output provides true-load disconnect and is protected by an adjustable output current limit. It has an input current limit up to 4.0A and can charge a single-cell battery up to 3.15A. When configured in reverse-boost mode, the IC requires no additional inductors to power USB-OTG accessories. The switching charger is designed with a special CC, CV, and die temperature regulation algorithm, as well as I2C programmable settings to accommodate a wide range of battery sizes and system loads. The on-chip ADC can help monitor the charging input voltage/current, battery voltage, charging/discharging current, and the battery temperature.

The MAX77860 communicates through an I2C 3.0 compatible serial interface consisting of a bidirectional serial data line (SDA) and a serial clock line (SCL). The IC is available in a 3.9mm x 4.0mm, 81-bump (9 x 9 array), 0.4mm pitch, wafer-level package (WLP).

Design Solution: How to Shrink Your USB Type-C Battery Charger ›

MAX77860: Simplified Block Diagram MAX77860: Simplified Block Diagram Enlarge+

Key Features

  • Single-Cell Switch Mode Charger
    • Up to 14V Protection
    • 4.0V to 13.5V Input Operating Range
    • Switching Charger with D+/D- Charger Detection
    • Up to 4.0A Input Current Limit with Adaptive Input Current Limit (AICL)
    • Up to 3.15A Battery Charging Current Limit
    • Optional External Sense Resistor
    • CC, CV, and Die Temperature Control
    • Supports USB-OTG Reverse Boost, up to 1.5A Current Limit
    • Master-Slave Charging Capability, up to 6A Charge Current
    • Integrated Battery True-Disconnect FET
    • Rated up to 9ARMS, Discharge Current Limit (Programmable)
  • USB Type-C Detection
    • Integrated VCONN Switch
    • CC Pin
    • D+/D- Detection for USB HVDCP
    • BC 1.2 Support
  • One Safeout LDO
  • I2C-Compatible Interface

Applications/Uses

  • USB Type-C Charging for 1S Li-ion Applications
  • Mobile Point-of-Sale Devices
  • Portable Medical Equipment
  • Portable Industrial Equipment

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX77860EVKIT: Evaluation Kit for the MAX77860
Request Reliability Report for: MAX77860 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX77960
25VIN 3A/6AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries

  • 3.5V to 25.4V Input Operating Range, 30VDC Withstand
  • 97% Peak Efficiency for 2S Battery at 9VIN/7.4VOUT/1.5AOUT
  • 97% Peak Efficiency for 3S Battery at 15VIN/12.6VOUT/2AOUT

MAX77961
25VIN 3A/6AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries

  • 3.5V to 25.4V Input Operating Range, 30VDC Withstand
  • 97% Peak Efficiency for 2S Battery at 9VIN/7.4VOUT/1.5AOUT
  • 97% Peak Efficiency for 3S Battery at 15VIN/12.6VOUT/2AOUT

MAX20361
Small, Single-/Multi-Cell Solar Harvester with MPPT and Harvest Counter

  • Single-/Multi-Cell Solar Energy Harvester
  • Maximum Power Point Tracking (MPPT) Technique Using Fractional VOC Method
  • Battery/Supercapacitor Charger

MAX20342
USB Type-C Charger Detector with Integrated OVP

  • Low Power Consumption
  • Delivers USB Compliance and Flexibility
  • Simplifies Complex System Designs

MAX17701
4.5V to 60V, Synchronous Step-Down Supercapacitor Charger Controller

  • Optimized Feature Set for Supercapacitor Charging
  • Reliable Operation in Adverse Environmental Conditions

MAX77751
3.15A USB Type-C Autonomous Charger for 1-Cell Li+ Batteries

  • Up to 16V Protection
  • 13.7V Maximum Input Operating Voltage
  • 3.15A Maximum Charging Current

MAX77962
23VIN 3.2AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S Li-Ion Batteries

  • 3.5V to 23V Input Operating Range, 30VDC Withstand Voltage
  • Reverse Leakage Protection
  • 50mA to 3.15A Programmable Input Current Limit

MAX17320
2S-4S ModelGauge m5 EZ Fuel Gauge with Protector, Internal Self-Discharge Detection, and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • ModelGauge m5 EZ Algorithm
  • Precision Measurement Without Calibration