MAX77640

Ultra-Low Power PMIC with 3-Output SIMO, 150mA LDO, and Power Sequencer

Highly-Integrated Battery Charging and Power Solution for Low-Power, Size-Constrained Applications


Please check latest availability status for a specific part variant.

Description

The MAX77640/MAX77641 are a low-IQ power solution for applications where size and efficiency are critical. The device integrates a 3-output single-inductor multiple-output (SIMO) buck-boost regulator, a 150mA LDO, and a 3-channel current-sink driver.

The SIMO operates on an input between 2.7V and 5.5V. The outputs are independently programmable between 0.8V and 5.25V depending on ordering option. Each output is a buck-boost with glitchless transition between buck and boost operation. The SIMO can support >300mA loads (1.8VOUT, 3.7VIN).

The 150mA LDO provides ripple rejection for noise-sensitive applications. The current sinks can be programmed to blink LEDs in custom patterns. The device integrates a power sequencer to control power-up/down order of each output. Default output voltages and sequence order are factory-programmable. An I2C serial interface further configures the device.

The MAX77640/MAX77641 are available in a 30-bump wafer-level package (WLP). Total solution size is 16mm2. For a similar product with a battery charger, refer to the MAX77650.

Design Solution: Choose a Tailored SIMO PMIC for Your Portable Design ›

MAX77640, MAX77641: Simplified Application Circuit MAX77640, MAX77641: Simplified Application Circuit Enlarge+

Key Features

  • Compact, High-Efficiency Power Solution
    • 3-Output Single-Inductor Multiple-Output (SIMO) Buck-Boost Regulator
    • 150mA LDO
    • 3-Channel Current-Sink Driver
    • Flexible Power Sequencing
    • GPIO and Reset Output
  • 3-Output SIMO Extends Battery Life
    • 2.7V to 5.5V Input Voltage Range from Single Cell Li-Ion
    • 0.8V to 5.25V Output Voltage Range (Table 1)
    • Supports >300mA loads (1.8VOUT, 3.7VIN)
    • Improves Overall System Efficiency while Reducing Size
    • Maintains Regulation without Dropout unlike Traditional Bucks
    • Glitchless Buck-Boost Operation
  • Low Quiescent Current
    • 300nA Shutdown Current
    • 5.6µA Operating Current (3 SIMO Channels and LDO On)
  • Small Size
    • 2.75mm x 2.15mm (0.7mm max heigh) WLP
    • 30-Bump, 0.4mm Pitch, 6 x 5 Array
    • 16mm2 Total Solution Size

Applications/Uses

  • Action Cameras, Wearable/Body Cameras
  • Hearables: Bluetooth Headphones and Earbuds
  • Internet of Things (IoT) Devices
  • Wearables: Fitness, Health, and Activity Monitors
Part NumberPrimary TopologyMonitor/Control FeaturesDC-DC/Power FeaturesInterface TypeVIN
(V)
VIN
(V)
VOUT
(V)
VOUT
(V)
Max. IOUT
(A)
Max. IOUT
(A)
Oper. Freq.
(kHz)
Package/PinsBudgetary
Price
minmaxminmaxSee Notes
MAX77640 NEW!
H-Bridge
Step-Down
Step-Up
Step-Up/Down
Reset Output
Serial Interface
Shutdown
Current Limit
Internal Switch
Soft Start
Sync. Rectifier
GPIO
I2C
2.75.50.83.950.30.31000
WLP/30
$1.70 @1k
MAX77641 NEW!5.25
WLP/30
-
See All Multifunction PMICs (83)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX77640EVKIT: Evaluation Kit for the MAX77640/ MAX77641
MAX77641EVKIT: Evaluation Kit for the MAX77640/ MAX77641
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

Related Resources


MAX20345
PMIC with Ultra-Low IQ Voltage Regulators, Buck-Boost for Optical Sensing and Charger for Small Lithium Ion Systems

  • Extend Battery-Use Time Between Charging
  • Easy to Implement Li+ Battery Charging
  • Optimize System Control

MAX20335
Wearable Charge Management Solution

  • Extend System Use Time Between Battery Charging
  • Easy-to-Implement Li+ Battery Charging
  • Minimize Solution Footprint Through High Integration

MAX17262
5.2µA 1-Cell Fuel Gauge with ModelGauge m5 EZ and Internal Current Sensing

  • ModelGauge m5 EZ
  • Low 5.2µA Operating Current
  • Integrated Current Sensing

MAX20332
USB Charger Detection with Integrated Overvoltage Protection

  • Consumes Less Power
  • Delivers USB Compliance and Flexibility
  • Facilitates System Design

MAX77640
Ultra-Low Power PMIC with 3-Output SIMO, 150mA LDO, and Power Sequencer

  • Compact, High-Efficiency Power Solution
  • 3-Output SIMO Extends Battery Life
  • Low Quiescent Current

MAX77641
Ultra-Low Power PMIC with 3-Output SIMO, 150mA LDO, and Power Sequencer

  • Compact, High-Efficiency Power Solution
  • 3-Output SIMO Extends Battery Life
  • Low Quiescent Current

MAX17263
Single/Multi-Cell Fuel Gauge with ModelGauge m5 EZ and Integrated LED Control

  • ModelGauge m5 EZ
  • Monitors Single Cell or Multiple-Series Cell Battery Pack
  • Integrated LED Control with Push-Button Input

MAX17261
5.1µA Multi-Cell Fuel Gauge with ModelGauge m5 EZ

  • ModelGauge m5 EZ
  • Low 5.1µA Operating Current
  • Monitors Multiple-Cell Battery Pack

MAX17260
5.1µA 1-Cell Fuel Gauge with ModelGauge m5 EZ and Optional High-Side Current Sensing

  • ModelGauge m5 EZ
  • Low 5.1µA Operating Current
  • Accurate Current Sensing