MAX20303

Wearable Power Management Solution

Extend Battery Life of Wearable Electronics


Please check latest availability status for a specific part variant.

Description

The MAX20303 is a highly integrated and programmable power management solution designed for ultra-low-power wearable applications. It is optimized for size and efficiency to enhance the value of the end product by extending battery life and shrinking the overall solution size. A flexible set of power-optimized voltage regulators, including multiple bucks, boost, buck-boost, and linear regulators, provides a high level of integration and the ability to create a fully optimized power architecture. The quiescent current of each regulator is specifically suited for 1µA (typ) to extend battery life in always-on applications.

The MAX20303 includes a complete battery management solution with battery seal, charger, power path, and fuel gauge. Both thermal management and input protection are built into the charger.

The device also includes a factory programmable button controller with multiple inputs that are customizable to fit specific product UX requirements. Three integrated LED current sinks are included for indicator or backlighting functions, and an ERM/LRA driver with automatic resonance tracking is capable of providing sophisticated haptic feedback to the user.

The device is configurable through an I2C interface that allows for programming various functions and reading device status, including the ability to read temperature and supply voltages with the integrated ADC.

This device is available in a 56-bump, 0.5mm pitch 3.71mm x 4.21mm, wafer-level package (WLP) and operates over the -40°C to +85°C extended temperature range.

Design Solution: Take a Weight Off Your Chest with a Wrist-Worn ECG Monitor ›

Design Solution: Designing for Wearable Health and Fitness? Think Inside the Box ›


Introducing the MAX-HEALTH-BAND Heart Rate and Activity Monitor

MAX20303: Typical Application Diagram MAX20303: Typical Application Diagram Enlarge+

Key Features

  • Extend Battery Use Time Between Battery Charging
    • 2 x Micro-IQ Buck Regulators (<1µA IQ (typ) Each)
      • 220mA Output
      • Buck1: 0.8V to 2.375V in 25mV Steps
      • Buck2: 0.8V to 3.95V in 50mV Steps
    • Micro-IQ LV LDO/Load Switch (1µA IQ (typ))
      • 1.16V to 2.0V Input Voltage
      • 50mA Output
      • 0.5V to 1.95V Output, 25mV Steps
    • Micro-IQ LDO/Load Switch (1µA IQ (typ))
      • 1.71V to 5.5V Input Voltage
      • 100mA Output
      • 0.9V to 4V, 100mV Steps
    • Micro-IQ Buck-Boost Regulator (1.3µA IQ (typ))
      • 250mW Output
      • 2.5V to 5V in 100mV Steps
  • Easy-to-Implement Li+ Battery Charging
    • Wide Fast Charge Current Range: 5mA to 500mA
    • Smart Power Selector
      • 28V/-5.5V Tolerant Input
      • Programmable JEITA Current/Voltage Profiles
  • Minimize Solution Footprint Through High Integration
    • Safe Output LDO
      • 15mA When CHGIN Present
      • 5V or 3.3V
    • Haptic Driver
      • ERM/LRA Driver with Quick Start And Breaking
      • Automatic Resonance Tracking (LRA only)
    • Support Wide Variety of Display Options
      • Micro-IQ Boost Regulator (2.4µA IQ(typ))
        • 300mW Output
        • 5V to 20V in 250mV Step
      • 3 Channel Current Sinks
        • 20V Tolerant
        • Programmable from 0.6 to 30mA
    • Optimize System Control
      • Power-On/Reset Controller
      • Programmable Push-Button Controller
      • Programmable Supply Sequencing
      • Factory Shelf Mode
      • On-Chip Voltage Monitor Multiplexer and Analog-to-Digital Converter (ADC)

Applications/Uses

  • IoT
  • Wearable Devices
Part NumberPrimary TopologyMonitor/Control FeaturesDC-DC/Power FeaturesBattery Charger FeaturesInterface TypeVIN
(V)
VIN
(V)
VOUT
(V)
VOUT
(V)
Max. IOUT
(A)
Max. IOUT
(A)
Package/PinsBudgetary
Price
minmaxminmaxSee Notes
MAX20303 
Step-Down
Step-Up
Step-Up/Down
Dynamic V Adj.
Reset Output
Serial Interface
Shutdown
Adj. Frequency
Current Limit
Fixed Freq./PWM
Internal Switch
Soft Start
Sync. Rectifier
Battery Charger
Charge Timer
Input Current Limit
Smart Pwr. Selector
Thermal Die Regulation
Thermistor Input
USB Input
GPIO
I2C
2.7280.83.950.30.3
WLP/56
$5.82 @1k
See All Multifunction PMICs (79)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX20303EVKIT: Evaluation Kit for the MAX20303
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX17312
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17311
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17313
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17301
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17302
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17303
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17823H
12-Channel, High-Voltage Sensor with Integrated 650mA Cell Balancing and Differential UART for Daisy-Chain Communication

  • AECQ-100 Grade 2 Temperature Range
  • Operating Voltage from 9V to 65V
  • Ultra-Low Power Operation

MAX17853
14-Channel High-Voltage Data-Acquisition System

  • 65V Operating Voltage
  • Ultra-Low-Power Operation
  • Redundant ADC and Comparator (COMP) Acquisitions

MAX77860
USB Type-C, 3A Switch-Mode Buck Charger with Integrated CC Detection, Reverse Boost, and ADC

  • Single-Input Switch Mode Charger
  • USB Type-C Detection
  • One Safeout LDO
  • I2C-Compatible Interface