MAX1908EVKIT

Evaluation Kit for the MAX1908


Please check latest availability status for a specific part variant.

Description

The MAX1908 evaluation kit (EV kit) is an accurate and efficient multichemistry battery charger. It uses analog inputs to control charge voltage and current. The EV kit can charge 2 to 4 series lithium-ion (Li+) cells with a current up to 3A. High efficiency is achieved by a buck topology with synchronous rectification. The EV kit provides outputs that can be used to monitor the input current, the battery-charging current, and the presence of an AC adapter.

Key Features

  • Input Current Limiting
  • ±0.5% Battery-Voltage Set-Point Accuracy Using Internal Reference
  • Analog Inputs Control Charge Current and Battery-Voltage Set Point
  • Monitor Outputs for
    • Current Drawn from AC Input Source
    • Charging Current
    • AC Adapter Presence
  • Up to 17.6V Battery-Voltage Set Point
  • +8V to +25V Input Voltage
  • 3A Battery Charge Current
  • Charges Any Battery Chemistry: Li+, NiCd, NiMH, Lead Acid, etc.
  • Surface-Mount Construction
  • Fully Assembled and Tested

Applications/Uses

  • Handheld Terminals
  • Notebook and Subnotebook Computers
  • PDAs and Other Handheld Devices

Quality and Environmental Data

Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX17301
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17302
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17313
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17311
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17312
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17303
1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • Nonvolatile Memory for Stand-Alone Operation
  • Low Quiescent Current

MAX17823H
12-Channel, High-Voltage Data-Acquisition Systems

  • AEC-Q100 Grade 2 Temperature Range
  • Operating Voltage from 9V to 65V
  • Ultra-Low Power Operation


Belle Isle 2020
05/29/2020 - 05/31/2020, Detroit, MI
2020 Detroit Grand Prix - Chevrolet Detroit Grand Prix presented by Lear Fast Facts The Chevrolet Detroit Grand Prix presented by Lear was hosted on Belle Isle, May 29 - 30 2020. The event featured the cars of the NTT IndyCar Series, the IMSA WeatherTech SportsCar Championship and the Trans Am Series presented by Pirelli. The weekend is collectively referred to as the Chevrolet Detroit Grand Prix presented by Lear and it once again featured the Chevrolet Dual in Detroit IndyCar doubleheader.

RSVP