Evaluation Kit for the MAX17320

Please check latest availability status for a specific part variant.


The MAX17320X/MAX17320G evaluation kits (EV kits) are fully assembled and tested surface-mount PCBs that evaluate the stand-alone pack-side fuel gauge IC with protector and optional SHA-256 authentication for 2-4 cell lithium-ion/polymer batteries.

  1. The MAX17320 EV kits include the IC evaluation board with integrated I2C/1-Wire® interface and USB micro-B cable. Windows® based graphical user interface (GUI) software is available for use with the EV kit and can be downloaded from https:// product page under “Design Resources” tab. Windows 7 or newer Windows operating system is required to use with the EV kit GUI software.

Key Features

  • ModelGauge m5 Algorithm
  • Monitors Multicell Packs
  • Full Protection Solution On-Board for Evaluation
  • Battery Pack Input Voltage Range of +2.3V to +4.9V/Cell with Default Hardware
  • Default Current Range -10A to +10A with 5mΩ Sense Resistor, Higher Currents Can Be Supported by Changing to a Smaller Sense Resistor
  • Thermistor Measurement
  • On-Board I2C/1-Wire Communication Interface with Built-In MAXUSB Interface
  • Windows 7 or Newer Compatible Software
  • Proven PCB Layout
  • Fully Assembled and Tested


  • Digital Still, Video, and Action Cameras
  • Handheld Computers, Radios, and Terminals
  • Medical Devices, Health and Fitness Monitors
  • Power Tools, Wireless Speakers, and Drones
  • Smart Batteries and Battery Backup
  • Smartphones, Tablets, and 2-in-1 Laptops

Tools & Models

  • MAX17320X ODB Files
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >


    Related Resources

    4.5V to 60V, Synchronous Step-Down Supercapacitor Charger Controller

    • Optimized Feature Set for Supercapacitor Charging
    • Reliable Operation in Adverse Environmental Conditions

    3.15A USB Type-C Autonomous Charger for 1-Cell Li+ Batteries

    • Up to 16V Protection
    • 13.7V Maximum Input Operating Voltage
    • 3.15A Maximum Charging Current

    23VIN 3.2AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S Li-Ion Batteries

    • 3.5V to 23V Input Operating Range, 30VDC Withstand Voltage
    • Reverse Leakage Protection
    • 50mA to 3.15A Programmable Input Current Limit

    2S-4S ModelGauge m5 EZ Fuel Gauge with Protector, Internal Self-Discharge Detection, and SHA-256 Authentication

    • Battery Health + Programmable Safety/Protection
    • ModelGauge m5 EZ Algorithm
    • Precision Measurement Without Calibration

    12-Channel High-Voltage Data Acquisition System

    • AEC-Q100 Grade 2 Temperature Range
    • Operating Voltage from 9V to 65V
    • Ultra-Low-Power Operation