DS2762

High-Precision Li+ Battery Monitor with Alerts

1-Wire Battery Monitor Integrates Single-Cell Protector and Alerts System when Current or Temperature Exceeds User-Defined Limits


Description

The DS2762 high-precision Li+ battery monitor is a data-acquisition, information-storage, and safety-protection device tailored for cost-sensitive battery pack applications. This low-power device integrates precise temperature, voltage, and current measurement, nonvolatile (NV) data storage, and Li+ protection into the small footprint of either a TSSOP package or flip-chip package. The DS2762 is a key component in applications including remaining capacity estimation, safety monitoring, and battery-specific data storage.
DS2762 high-precision Li+ battery monitor is a data-acquisition, information-storage, and safety-protection device tailored for cost-sensitive battery pack applications | Pin Configurations DS2762 high-precision Li+ battery monitor is a data-acquisition, information-storage, and safety-protection device tailored for cost-sensitive battery pack applications | Pin Configurations Enlarge+

Key Features

  • Li+ Safety Circuit
    • Overvoltage Protection
    • Overcurrent/Short-Circuit Protection
    • Undervoltage Protection
  • Host Alerted When Accumulated Current or Temperature Exceeds User-Selectable Limits
  • 0V Battery Recovery Charge
  • Available in Two Configurations:
    • Internal 25mΩ Sense Resistor
    • External User-Selectable Sense Resistor
  • Current Measurement
    • 12-Bit Bidirectional Measurement
    • Internal Sense Resistor Configuration: 0.625mA LSB and ±1.9A Dynamic Range
    • External Sense Resistor Configuration: 15.625µV LSB and ±64mV Dynamic Range
  • Current Accumulation:
    • Internal Sense Resistor: 0.25mAhr LSB
    • External Sense Resistor: 6.25µVhr LSB
  • Voltage Measurement with 4.88mV Resolution
  • Temperature Measurement Using Integrated Sensor with 0.125°C Resolution
  • System Power Management and Control Feature Support
  • 32 Bytes of Lockable EEPROM
  • 16 Bytes of General-Purpose SRAM
  • Dallas 1-Wire® Interface with Unique 64-Bit Device Address
  • Low-Power Consumption:
    • Active Current: 60µA typ, 90µA max
    • Sleep Current: 1µA typ, 2µA max

Applications/Uses

  • Cell Phones/Smartphones
  • Digital Cameras
  • PDAs
Part Number Functions Battery Type Interface User Data Storage
(Bytes)
Parameters Measured Applications Battery Protection VSUPPLY
(V)
VSUPPLY
(V)
Package/Pins Oper. Temp.
(°C)
Budgetary
Price
min max See Notes
DS2762 
Fuel Gauge
Protector
Status Monitor
1 Cell Li-Ion 1-Wire
16 SRAM
32 EEPROM
Current
Temperature
Voltage
Pack
Over-Current
Over/Under Voltage
2.5 5.5
FCHIP/12
TSSOP/16
-40 to +85 $3.48 @1k
See All Battery Monitors, Protectors, and Selectors (38)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


DS2762K: Li+ Battery Monitor Evaluation Kit

Tools & Models

Software
DS2762K Evaluation Kit Software

Related Resources


MAX14746
USB Detection with Smart Power Selector Li+ Chargers

  • Flexible System Design to Operate with Any USB Charger Source
  • Easy to Implement Li+ Battery Charging
  • Integrates High Level of Protection

MAX14747
USB Detection with Smart Power Selector Li+ Chargers

  • Flexible System Design to Operate with Any USB Charger Source
  • Easy to Implement Li+ Battery Charging
  • Integrates High Level of Protection

MAX14745
Wearable Charge-Management Solution

  • Extend System Use Time Between Battery Charging
  • Easy-to-Implement Li+ Battery Charging
  • Minimize Solution Footprint Through High Integration