DS2715KLINEAR

Evaluation Kit for the DS2715


Please check latest availability status for a specific part variant.

Description

The DS2715 demonstration board allows the user to explore all features of the DS2715 NiMH charge controller. The demo board is populated for either linear-mode operation or switch-mode operation. The default configuration for the linear mode kit charges a 3-cell stack at an approximately 0.5A charge rate with a 130-minute timeout. The default configuration for the switch-mode kit charges a 3-cell stack at an approximately 1.0A charge rate with a 70-minute timeout.

Key Features

  • Charges Up to 10 NiMH cells
  • Load Detection Allows the Device to Enter Low-Power State
  • dT/dt Charge Termination
  • Monitors Voltage, Temperature, and Time
  • Regulates Charge Current Through Linear or Switch-Mode Operation
  • LED Displays Charge State

Applications/Uses

  • Handheld Gaming
  • Handheld POS Terminals
  • Portable DVD Players
  • Portable Television Sets
  • Test Equipment
Request Reliability Report for: DS2715KLINEAR 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX77960
25VIN 3A/6AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries

  • 3.5V to 25.4V Input Operating Range, 30VDC Withstand
  • 97% Peak Efficiency for 2S Battery at 9VIN/7.4VOUT/1.5AOUT
  • 97% Peak Efficiency for 3S Battery at 15VIN/12.6VOUT/2AOUT

MAX77961
25VIN 3A/6AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries

  • 3.5V to 25.4V Input Operating Range, 30VDC Withstand
  • 97% Peak Efficiency for 2S Battery at 9VIN/7.4VOUT/1.5AOUT
  • 97% Peak Efficiency for 3S Battery at 15VIN/12.6VOUT/2AOUT

MAX20361
Small, Single-/Multi-Cell Solar Harvester with MPPT and Harvest Counter

  • Single-/Multi-Cell Solar Energy Harvester
  • Maximum Power Point Tracking (MPPT) Technique Using Fractional VOC Method
  • Battery/Supercapacitor Charger

MAX20342
USB Type-C Charger Detector with Integrated OVP

  • Low Power Consumption
  • Delivers USB Compliance and Flexibility
  • Simplifies Complex System Designs

MAX17701
4.5V to 60V, Synchronous Step-Down Supercapacitor Charger Controller

  • Optimized Feature Set for Supercapacitor Charging
  • Reliable Operation in Adverse Environmental Conditions

MAX77751
3.15A USB Type-C Autonomous Charger for 1-Cell Li+ Batteries

  • Up to 16V Protection
  • 13.7V Maximum Input Operating Voltage
  • 3.15A Maximum Charging Current

MAX77962
23VIN 3.2AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S Li-Ion Batteries

  • 3.5V to 23V Input Operating Range, 30VDC Withstand Voltage
  • Reverse Leakage Protection
  • 50mA to 3.15A Programmable Input Current Limit

MAX17320
2S-4S ModelGauge m5 EZ Fuel Gauge with Protector, Internal Self-Discharge Detection, and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • ModelGauge m5 EZ Algorithm
  • Precision Measurement Without Calibration