MAX9959

25V Span, 800mA Device Power Supply (DPS)

Fully Integrated 25V Span, 800mA Device Power Supply for Industrial Test and Instrumentation Applications


Please check latest availability status for a specific part variant.

Description

The MAX9959 provides all the key features of a device power supply (DPS) common to automatic test equipment (ATE) and other instrumentation. Its small size, high level of integration, and superb flexibility make the MAX9959 ideal and economical for multisite systems requiring many device power supplies.

The MAX9959 has multiple input control voltages that allow independent setting of both the output voltage, and the maximum and minimum (smallest positive or most negative) voltage or current. The MAX9959 is a voltage source when the load current is between the two programmed limits, and transitions gracefully into a precision current source/sink if a programmed current limit is reached. The output features two independently adjustable voltage clamps that limit both the negative and positive output voltage values between levels externally provided.

The MAX9959 can source voltages spanning 25V and can source currents as high as ±800mA. The DPS can support an external buffer for sourcing and sinking higher currents. Multiple MAX9959s can be configured in parallel to load-share, allowing higher output currents with greater flexibility.

The MAX9959 features operation over a wide range of loading conditions. Programmability allows optimizing of settling time, over-/undershoot, and stability. Built-in, configurable, range-change glitch-control circuits minimize output glitches during range transitions.

The MAX9959 offers load regulation of 1mV at 800mA load.

The MAX9959D features an internal 300kΩ sense resistor (RFS), between RCOMF and SENSE. The MAX9959F does not include this sense resistor. Both devices are available in the 100-pin TQFP package with an exposed pad on the top for heat removal.

Key Features

  • 25V Span Output Voltage
  • Programmable Current and Voltage Compliance
  • Programmable Current Ranges
    • ±200µA
    • ±2mA
    • ±20mA
    • ±800mA
  • Load Regulation of 1mV at 800mA
  • External Buffer Support for Higher Currents
  • Parallel Multiple Devices for Higher Currents
  • Programmable Gain Allows a Wide Range of DACs
  • Device-Under-Test (DUT) Ground Sense
  • Programmable Compensation for Wide Range of Loads
  • Integrated Go/No-Go Comparators
  • IDDQ Test Mode
  • Range-Change Glitch Control
  • Compact (14mm x 14mm) Package
  • 3-Wire Compatible Serial Interface
  • Thermal Warning Flag and Thermal Shutdown

Applications/Uses

  • Industrial Systems
  • Memory Testers
  • Structural Testers
  • System-on-a-Chip Testers
  • VLSI Testers

MAX9959EVKIT: Evaluation Kit for the MAX9959

Technical Documents

App Note 4303 Impact of Cable Losses

Quality and Environmental Data

Request Reliability Report for: MAX9959 
Lead-Free Package Tin (Sn) Whisker Reports

CAD Symbols and Footprints

  • MAX9959DCCQ+D
  • MAX9959FCCQ+CAG
  • MAX9959FCCQ+D
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX17823H
    12-Channel, High-Voltage Sensor with Integrated 650mA Cell Balancing and Differential UART for Daisy-Chain Communication

    • AECQ-100 Grade 2 Temperature Range
    • Operating Voltage from 9V to 65V
    • Ultra-Low Power Operation

    MAX25615EVKIT
    Evaluation Kit for the MAX25615

    • +4V to +16V Single Power-Supply Range
    • 7A Peak Sink Current
    • 3A Peak Source Current

    MAX25615
    7A Sink, 3A Source, 12ns, SOT23 MOSFET Drivers

    • Automotive Ready: AEC-Q100 Qualified
    • Independent Source and Sink Outputs
    • +4V to +15.5V Single Power-Supply Range

    MAX20334
    OverVoltage and Surge-Protected Dual SPDT Data Line Switch

    • Distortion-Free, High-Speed Signaling
    • Flexible System Design
    • Robust and Safety

    MAX25611A
    Automotive High-Voltage, HB-LED Controller

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM for High-Brightness LED Driver
    • Flexible Application Configurations

    MAX25611B
    Automotive High-Voltage, HB-LED Controller

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM for High-Brightness LED Driver
    • Flexible Application Configurations

    MAX25611C
    Automotive High-Voltage, HB-LED Controller

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM for High-Brightness LED Driver
    • Flexible Application Configurations

    MAX25611D
    Automotive High-Voltage, HB-LED Controller

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM for High-Brightness LED Driver
    • Flexible Application Configurations

    MAX25610B
    Synchronous Buck and Buck Boost LED Driver / DC-DC Converter

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM to Save Space and Cost
    • Wide Dimming Ratio Allows High Contrast Ratio

    MAX25610A
    Synchronous Buck and Buck Boost LED Driver / DC-DC Converter

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM to Save Space and Cost
    • Wide Dimming Ratio Allows High Contrast Ratio

    MAX16152
    nanoPower Supervisor and Watchdog Timer

    • 400nA (typ) Supply Current
    • 1.2V to 5.5V Operating Supply Range
    • Monitors Supply Voltage and Provides System Reset Signal

    MAX16153
    nanoPower Supervisor and Watchdog Timer

    • 400nA (typ) Supply Current
    • 1.2V to 5.5V Operating Supply Range
    • Monitors Supply Voltage and Provides System Reset Signal

    MAX16154
    nanoPower Supervisor and Watchdog Timer

    • 400nA (typ) Supply Current
    • 1.2V to 5.5V Operating Supply Range
    • Monitors Supply Voltage and Provides System Reset Signal

    MAX16155
    nanoPower Supervisor and Watchdog Timer

    • 400nA (typ) Supply Current
    • 1.2V to 5.5V Operating Supply Range
    • Monitors Supply Voltage and Provides System Reset Signal

    MAX17613C
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count

    MAX17613A
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count

    MAX17613B
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count

    MAX21610
    Automotive 16-Channel 100mA Local Dimming Backlight Driver with SPI Interface

    • High Integration
    • Robust and Low EMI
    • Relative Dimming Ratio Between Strings Up to 32768:1

    MAX17687
    4.5V to 60V Input, Ultra-Small, High-Efficiency, Iso-Buck DC-DC Converter

    • Eliminates External Components and Reduces Total Cost
    • Supports Numerous Isolated DC-DC Applications
    • Reduces Power Dissipation

    MAX17686
    4.5V to 60V Input, High-Efficiency, Iso-Buck DC-DC Converter

    • Reduces External Components and Total Cost
    • Supports Numerous Isolated DC-DC Applications
    • Reduces Power Dissipation

    MAX20480
    Automotive ASIL-D 7-Channel Power-System Monitor

    • Small Solution
    • High Precision
    • Highly Integrated

    MAXM15465
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15466
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15467
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17623
    2.9V to 5.5V, 1A Himalaya uSLIC Step-Down Power Modules

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17624
    2.9V to 5.5V, 1A Himalaya uSLIC Step-Down Power Modules

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAX17853
    14-Channel High-Voltage Data-Acquisition System

    • 65V Operating Voltage
    • Ultra-Low-Power Operation
    • Redundant ADC and Comparator (COMP) Acquisitions

    MAX20444B
    Automotive 4-Channel 130mA Backlight Driver with Boost/SEPIC Controller and I2C Interface

    • Wide-Voltage-Range Operation
    • High Integration
    • Robust and Low EMI

    MAX77860
    USB Type-C, 3A Switch-Mode Buck Charger with Integrated CC Detection, Reverse Boost, and ADC

    • Single-Input Switch Mode Charger
    • USB Type-C Detection
    • One Safeout LDO
    • I2C-Compatible Interface

    MAX38902E
    14μVRMS Low Noise 500mA LDO Linear Regulator

    • Delivers Flexible Operating Range
    • Reduces Noise and Improved Accuracy
    • Enables Easy-of-Use and Robust Protection

    MAX38904C
    1.7V–5.5VIN, 2A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38904D
    1.7V–5.5VIN, 2A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38904A
    1.7V–5.5VIN, 2A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38904B
    1.7V–5.5VIN, 2A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX16150
    nanoPower Pushbutton On/Off Controller and Battery Freshness Seal

    • Low Power
    • Debounces Noisy Switches
    • Latched Output Supplies 20mA Load Current With Less Than 100mV Drop

    MAX20049
    Flexible, Compact Quad Power Supply with 2.2MHz, 500mA Buck Converters and Dual LDOs for Automotive Camera Modules

    • Small Solution Size
    • EMI Solutions
    • Self-Protected and Robust

    MAX17673
    Integrated 4.5V to 60V Synchronous 1.5A HV Buck and Dual 2.7V to 5.5V, 1A Buck Regulators

    • Reduces External Components and Total Cost
    • Integrates Three DC-DC Regulators
    • Reduces Power Dissipation

    MAX77813
    High-Efficiency Buck-Boost Converter

    • VIN Range: 2.30V to 5.5V
    • VOUT Range: 2.60V to 5.14V (I2C Programmable in 20mV Step)
    • Up to 2A Output Current in Boost Mode (VIN = 3.0V, VOUT = 3.4V, ILIM = High)

    MAX38640A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38641A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38642A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38641, MAX38641A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38642, MAX38642A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38643, MAX38643A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38643A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX5995A
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX5995B
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX5995C
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX38903A
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38903B
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38903C
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38903D
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX20004
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20008
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20006
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    Type ID PDF Title
    App Note 4303 Impact of Cable Losses

    Electronics in Vehicles (ELIV) 2019
    10/18/2019 - 10/19/2019, Bonn, Germany
    The international VDI Congress ELIV (Electronics In Vehicles) is THE event for all experts in the field of electrical and electronical car engineering and integration of mechanical and electronical systems.

    RSVP