MAX8632

Integrated DDR Power-Supply Solution for Desktops, Notebooks, and Graphic Cards


Please check latest availability status for a specific part variant.

Description

The MAX8632 integrates a synchronous-buck PWM controller to generate VDDQ, a sourcing and sinking LDO linear regulator to generate VTT, and a 10mA reference output buffer to generate VTTR. The buck controller drives two external n-channel MOSFETs to generate output voltages down to 0.7V from a 2V to 28V input with output currents up to 15A. The LDO can sink or source up to 1.5A continuous and 3A peak current. Both the LDO output and the 10mA reference buffer output can be made to track the REFIN voltage. These features make the MAX8632 ideally suited for DDR memory applications in desktops, notebooks, and graphic cards.

The PWM controller in the MAX8632 utilizes Maxim's proprietary Quick-PWM™ architecture with programmable switching frequencies of up to 600kHz. This control scheme handles wide input/output voltage ratios with ease and provides 100ns response to load transients while maintaining high efficiency and a relatively constant switching frequency. The MAX8632 offers fully programmable UVP/OVP and skip-mode options ideal in portable applications. Skip mode allows for improved efficiency at lighter loads.

The VTT and VTTR outputs track to within 1% of VREFIN/2. The high bandwidth of this LDO regulator allows excellent transient response without the need for bulk capacitors, thus reducing cost and size.

The buck controller and LDO regulators are provided with independent current limits. Adjustable lossless foldback current limit for the buck regulator is achieved by monitoring the drain-to-source voltage drop of the low-side MOSFET. Additionally, overvoltage and undervoltage protection mechanisms are built in. Once the overcurrent condition is removed, the regulator is allowed to enter soft-start again. This helps minimize power dissipation during a short-circuit condition. The MAX8632 allows flexible sequencing and standby power management using the active-low SHDN and active-low STBY inputs, which support all DDR operating states.

The MAX8632 is available in a small 5mm x 5mm, 28-pin thin QFN package.
MAX8632: Typical Operating Circuit MAX8632: Typical Operating Circuit Enlarge+

Key Features

Buck Controller
  • Quick-PWM with 100ns Load-Step Response
  • Up to 95% Efficiency
  • 2V to 28V Input Voltage Range
  • 1.8V/2.5V Fixed or 0.7V to 5.5V Adjustable Output
  • Up to 600kHz Selectable Switching Frequency
  • Programmable Current Limit with Foldback Capability
  • 1.7ms Digital Soft-Start
  • Independent Shutdown and Standby Controls
  • Overvoltage-/Undervoltage-Protection Option
  • Power-Good Window Comparator LDO Section
  • Fully Integrated VTT and VTTR Capability
  • VTT Has ±3A Sourcing/Sinking Capability
  • Only 20µF Ceramic Capacitance Required for VTT
  • VTT and VTTR Outputs Track VREFIN/2
  • All-Ceramic Output-Capacitor Designs
  • 1.0V to 2.8V Input Voltage Range
  • Power-Good Window Comparator

Applications/Uses

  • DDR I and DDR II Memory Power Supplies
  • Desktop Computers
  • Game Consoles
  • Graphic Cards
  • Networking
  • Notebooks and Desknotes
  • RAID

MAX8632EVKIT: Evaluation Kit for the MAX8632

Technical Documents

Tutorial 4992 Reduce the Chances of Human Error: Part 1, Power and Ground
App Note 3940 MAX8632 PCB Layout Optimization
Tutorial 2031 DC-DC Converter Tutorial

Quality and Environmental Data

Product Reliability Reports: MAX8632.pdf 
Lead-Free Package Tin (Sn) Whisker Reports

CAD Symbols and Footprints

  • MAX8632ETI+
  • MAX8632ETI+T
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX17823H
    12-Channel, High-Voltage Sensor with Integrated 650mA Cell Balancing and Differential UART for Daisy-Chain Communication

    • AECQ-100 Grade 2 Temperature Range
    • Operating Voltage from 9V to 65V
    • Ultra-Low Power Operation

    MAX25615EVKIT
    Evaluation Kit for the MAX25615

    • +4V to +16V Single Power-Supply Range
    • 7A Peak Sink Current
    • 3A Peak Source Current

    MAX25615
    7A Sink, 3A Source, 12ns, SOT23 MOSFET Drivers

    • Automotive Ready: AEC-Q100 Qualified
    • Independent Source and Sink Outputs
    • +4V to +15.5V Single Power-Supply Range

    MAX20334
    OverVoltage and Surge-Protected Dual SPDT Data Line Switch

    • Distortion-Free, High-Speed Signaling
    • Flexible System Design
    • Robust and Safety

    MAX25611A
    Automotive High-Voltage, HB-LED Controller

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM for High-Brightness LED Driver
    • Flexible Application Configurations

    MAX25611B
    Automotive High-Voltage, HB-LED Controller

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM for High-Brightness LED Driver
    • Flexible Application Configurations

    MAX25611C
    Automotive High-Voltage, HB-LED Controller

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM for High-Brightness LED Driver
    • Flexible Application Configurations

    MAX25611D
    Automotive High-Voltage, HB-LED Controller

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM for High-Brightness LED Driver
    • Flexible Application Configurations

    MAX25610A
    Synchronous Buck and Buck Boost LED Driver / DC-DC Converter

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM to Save Space and Cost
    • Wide Dimming Ratio Allows High Contrast Ratio

    MAX25610B
    Synchronous Buck and Buck Boost LED Driver / DC-DC Converter

    • Automotive Ready: AEC-Q100 Qualified
    • Integration Minimizes BOM to Save Space and Cost
    • Wide Dimming Ratio Allows High Contrast Ratio

    MAX16154
    nanoPower Supervisor and Watchdog Timer

    • 400nA (typ) Supply Current
    • 1.2V to 5.5V Operating Supply Range
    • Monitors Supply Voltage and Provides System Reset Signal

    MAX16153
    nanoPower Supervisor and Watchdog Timer

    • 400nA (typ) Supply Current
    • 1.2V to 5.5V Operating Supply Range
    • Monitors Supply Voltage and Provides System Reset Signal

    MAX16155
    nanoPower Supervisor and Watchdog Timer

    • 400nA (typ) Supply Current
    • 1.2V to 5.5V Operating Supply Range
    • Monitors Supply Voltage and Provides System Reset Signal

    MAX16152
    nanoPower Supervisor and Watchdog Timer

    • 400nA (typ) Supply Current
    • 1.2V to 5.5V Operating Supply Range
    • Monitors Supply Voltage and Provides System Reset Signal

    MAX17613B
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count

    MAX17613C
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count

    MAX17613A
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count

    MAX21610
    Automotive 16-Channel 100mA Local Dimming Backlight Driver with SPI Interface

    • High Integration
    • Robust and Low EMI
    • Relative Dimming Ratio Between Strings Up to 32768:1

    MAX17687
    4.5V to 60V Input, Ultra-Small, High-Efficiency, Iso-Buck DC-DC Converter

    • Eliminates External Components and Reduces Total Cost
    • Supports Numerous Isolated DC-DC Applications
    • Reduces Power Dissipation

    MAX17686
    4.5V to 60V Input, High-Efficiency, Iso-Buck DC-DC Converter

    • Reduces External Components and Total Cost
    • Supports Numerous Isolated DC-DC Applications
    • Reduces Power Dissipation

    MAX20480
    Automotive ASIL-D 7-Channel Power-System Monitor

    • Small Solution
    • High Precision
    • Highly Integrated

    MAXM15465
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15466
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15467
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17624
    2.9V to 5.5V, 1A Himalaya uSLIC Step-Down Power Modules

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17623
    2.9V to 5.5V, 1A Himalaya uSLIC Step-Down Power Modules

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAX17853
    14-Channel High-Voltage Data-Acquisition System

    • 65V Operating Voltage
    • Ultra-Low-Power Operation
    • Redundant ADC and Comparator (COMP) Acquisitions

    MAX20444B
    Automotive 4-Channel 130mA Backlight Driver with Boost/SEPIC Controller and I2C Interface

    • Wide-Voltage-Range Operation
    • High Integration
    • Robust and Low EMI

    MAX77860
    USB Type-C, 3A Switch-Mode Buck Charger with Integrated CC Detection, Reverse Boost, and ADC

    • Single-Input Switch Mode Charger
    • USB Type-C Detection
    • One Safeout LDO
    • I2C-Compatible Interface

    MAX38902E
    14μVRMS Low Noise 500mA LDO Linear Regulator

    • Delivers Flexible Operating Range
    • Reduces Noise and Improved Accuracy
    • Enables Easy-of-Use and Robust Protection

    MAX38904C
    1.7V–5.5VIN, 2A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38904D
    1.7V–5.5VIN, 2A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38904A
    1.7V–5.5VIN, 2A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38904B
    1.7V–5.5VIN, 2A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX16150
    nanoPower Pushbutton On/Off Controller and Battery Freshness Seal

    • Low Power
    • Debounces Noisy Switches
    • Latched Output Supplies 20mA Load Current With Less Than 100mV Drop

    MAX20049
    Flexible, Compact Quad Power Supply with 2.2MHz, 500mA Buck Converters and Dual LDOs for Automotive Camera Modules

    • Small Solution Size
    • EMI Solutions
    • Self-Protected and Robust

    MAX17673
    Integrated 4.5V to 60V Synchronous 1.5A HV Buck and Dual 2.7V to 5.5V, 1A Buck Regulators

    • Reduces External Components and Total Cost
    • Integrates Three DC-DC Regulators
    • Reduces Power Dissipation

    MAX77813
    High-Efficiency Buck-Boost Converter

    • VIN Range: 2.30V to 5.5V
    • VOUT Range: 2.60V to 5.14V (I2C Programmable in 20mV Step)
    • Up to 2A Output Current in Boost Mode (VIN = 3.0V, VOUT = 3.4V, ILIM = High)

    MAX38640A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38641A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38642A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38642, MAX38642A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38643, MAX38643A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38643A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38641, MAX38641A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX5995A
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX5995B
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX5995C
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX38903B
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38903C
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38903D
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38903A
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX20004
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20008
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20006
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment


    Electronics in Vehicles (ELIV) 2019
    10/18/2019 - 10/19/2019, Bonn, Germany
    The international VDI Congress ELIV (Electronics In Vehicles) is THE event for all experts in the field of electrical and electronical car engineering and integration of mechanical and electronical systems.

    RSVP