MAX711

3.3V/5V or Adjustable, Step-Up Step-Down DC-DC Converters

Compact, Low-Noise, Transformerless Step-Up/Down Regulator with Single Small Inductor Has Low Output Ripple


Please check latest availability status for a specific part variant.

Description

The MAX710/MAX711 integrate a step-up DC-DC converter with a linear regulator to provide step-up/down voltage conversion. They are optimized for battery applications where the input varies above and below the regulated output voltage. They have an input range from +1.8V to +11V. Typical efficiency when boosting battery inputs is 85%.

The MAX710/MAX711 can be configured for minimum noise or optimum efficiency. Shutdown control turns off the part completely, disconnecting the input from the output (ISHDN = 0.2µA). Standby control turns off only the step-up converter and leaves the low-power linear regulator active (IQ = 7µA).

The MAX710 has a preset 3.3V or 5V output voltage. The MAX711 has an adjustable output that can be set from +2.7V to +5.5V with two resistors. Both devices come in 16-pin narrow SO packages.
MAX710, MAX711: Typical Operating Circuit MAX710, MAX711: Typical Operating Circuit Enlarge+

Key Features

  • Step-Up/Down Voltage Conversion
  • +1.8V to +11V Input Range
  • Output:
    • 5V/250mA at VIN = 1.8V
    • 5V/500mA at VIN = 3.6V
  • No External FETs Required
  • Load Disconnected from Input in Shutdown
  • Battery Drain:
    • 200µA No-Load (VIN = 4V)
    • 7µA in Standby
    • 0.2µA when Off
  • Low-Noise and High-Efficiency Modes

Applications/Uses

  • 2- to 4-Cell AA Alkaline Handheld Equipment
  • 2-, 3-, and 4-Cell Battery-Powered Equipment
  • 3.3V and Other Low-Voltage Systems
  • Battery-Powered Devices with AC Input Adapters
  • Digital Still Cameras
  • Single-Cell, Lithium-Powered Portable Devices

MAX710EVKIT: Evaluation Kit for the MAX710, MAX711
Request Reliability Report for: MAX711 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX77932C
8A Dual-Phase Switched-Capacitor Converter

  • ​8A Switched Capacitor Converter
  • 2S to 1S Battery Voltage Conversion (VOUT = VIN/2)
  • Integrated Power Switches

MAX17701
4.5V to 60V, Synchronous Step-Down Supercapacitor Charger Controller

  • Optimized Feature Set for Supercapacitor Charging
  • Reliable Operation in Adverse Environmental Conditions

MAX25014
Automotive Low Input Voltage I2C 4-Channel 150mA Backlight Driver

  • Wide Voltage-Range Operation
  • High Integration
  • Robust and Low EMI

MAX77751
3.15A USB Type-C Autonomous Charger for 1-Cell Li+ Batteries

  • Up to 16V Protection
  • 13.7V Maximum Input Operating Voltage
  • 3.15A Maximum Charging Current

MAX16926
Automotive 4-Output Display Power Solution with Watchdog

  • High Integration
  • Integrated Watchdog Timer
  • Robust and Low EMI

MAX25221
Automotive 4-Channel TFT-LCD Power Supply with VCOM buffer

  • High Integration
  • Low EMI
  • I2C Control/Diagnostic Interface with FLTB (Interrupt) Output

MAX25220
Automotive 4-Channel TFT-LCD Power Supply with VCOM Buffer

  • High Integration
  • Low EMI
  • I2C Control/Diagnostic Interface with FLTB (Interrupt) Output

MAX20710
Integrated, Step-Down Switching Regulator with PMBus

  • High Power Density and Low Component Count
  • Optimized Component Performance and Efficiency with Reduced Design-In Time
  • Increased Power-Supply Reliability with System and IC Self-Protection Features

MAX14922
High-Side Switch Controller with Current Limiting

  • +9V to +70V Operating Supply Range
  • 5V / 50mA Integrated Linear Regulator
  • -40°C to +125°C Ambient Temperature Operating Range

MAX77962
23VIN 3.2AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S Li-Ion Batteries

  • 3.5V to 23V Input Operating Range, 30VDC Withstand Voltage
  • Reverse Leakage Protection
  • 50mA to 3.15A Programmable Input Current Limit

MAX14917
Industrial Octal High-Side Switch

  • Robust Solutions
  • Reduces Power and Heat Dissipation
  • Flexible

MAX17760
4.5V to 76V, 300mA, High-Efficiency, Synchronous Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX20430
Four-Output Mini PMIC for Safety Applications

  • Multiple Functions for Small Size
  • High-Precision for ASIL Applications
  • Diagnostics and Redundant Circuits

MAX17320
2S-4S ModelGauge m5 EZ Fuel Gauge with Protector, Internal Self-Discharge Detection, and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • ModelGauge m5 EZ Algorithm
  • Precision Measurement Without Calibration

MAX18066
High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

  • Feature Integration Shrinks Solution Size
  • High Efficiency Conserves Power
  • Safe, Reliable, Accurate Operation

MAX18166
High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

  • Feature Integration Shrinks Solution Size
  • High Efficiency Conserves Power
  • Safe, Reliable, Accurate Operation

MAX77511
10V Input, Quad-Phase Configurable, 3A/Phase, High-Efficiency Buck Converter

  • 3A/Phase Configurable Buck Regulator
  • 2.3V to 10V Input Voltage Range
  • 0.25V to 5.2V Output Voltage Range

MAX77711
10V Input, Quad-Phase Configurable, 3A/Phase, High-Efficiency Buck Converter

  • 3A/Phase Configurable Buck Regulator
  • 2.3V to 10V Input Voltage Range
  • 0.25V to 5.2V Output Voltage Range

MAX15162
8V to 60V Smart Dual 1.5A Circuit Breaker with Accurate Current Monitoring

  • 8V to 60V Wide Input Voltage Range
  • Integrated Dual-Power MOSFET 
  • Turn-On Resistance 140mΩ (WLP), 180mΩ (TQFN) MOSFET

MAX16543
Integrated Protection IC on a High-Power 12V Bus with an Integrated MOSFET and Lossless Current Sensing

  • Used with the MAX16545B/MAX16545C to Provide Integrated Protection for Loads > 60A On 12V Bus
  • High Density: Industry’s Smallest Circuit Breaker Solution Provides More Than 75% Board Area Savings
  • Lossless, Precise Total System Current Sensing and Reporting

MAX16545B
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management

MAX16545C
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management

MAX20353
PMIC with Ultra-Low IQ Regulators, Charger, Fuel Gauge, and Haptic Driver for Small Li+ Systems

  • Extend Battery Use Time Between Battery Charging
  • Easy-to-Implement Li+ Battery Charging
  • Minimize Solution Footprint Through High Integration

MAX15093, MAX15093A
2.7V to 18V, 15A, Hot-Swap Solution with Current Report Output

  • Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
  • Flexibility Enables Use in Many Unique Designs
  • Safety Features Ensure Accurate, Robust Protection

MAX15093A
2.7V to 18V, 15A, Hot-Swap Solution with Current Report Output

  • Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
  • Flexibility Enables Use in Many Unique Designs
  • Safety Features Ensure Accurate, Robust Protection

MAX15158, MAX15158A
High-Voltage Multiphase Boost Controller

  • Wide Operating Range
  • Integration Reduces Design Footprint
  • Robust Fault Protection Improves Quality and Reliability

MAX15158A
High-Voltage Multiphase Boost Controller

  • Wide Operating Range
  • Integration Reduces Design Footprint
  • Robust Fault Protection Improves Quality and Reliability

MAX25201
36V Automotive Low-IQ 200kHz to 2.2MHz Synchronous Boost Controller

  • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • 20µA Quiescent Current in Skip Mode
    • ±1.5% FB Voltage Accuracy
    • Output Voltage Range: Fixed or Adjustable Between 3.5V and 60V
  • Enables Crank-Ready Designs
    • Operates Down to 1.8V After Startup
    • Wide Input Supply Range from 4.5V to 36V
  • EMI Reduction Features Reduce Interference with Sensitive Radio Bands Without Sacrificing Wide Input Voltage Range
    • Spread-Spectrum Option
    • Frequency-Synchronization Input
    • Resistor-Programmable Frequency Between 200kHz and 2.2MHz

  • MAX25202
    36V Automotive Low-IQ 200kHz to 2.2MHz Synchronous Boost Controller

  • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • 20µA Quiescent Current in Skip Mode
    • ±1.5% FB Voltage Accuracy
    • Output Voltage Range: Fixed or Adjustable Between 3.5V and 60V
  • Enables Crank-Ready Designs
    • Operates Down to 1.8V After Startup
    • Wide Input Supply Range from 4.5V to 36V
  • EMI Reduction Features Reduce Interference with Sensitive Radio Bands Without Sacrificing Wide Input Voltage Range
    • Spread-Spectrum Option
    • Frequency-Synchronization Input
    • Resistor-Programmable Frequency Between 200kHz and 2.2MHz

  • MAX25200
    36V Automotive Low-IQ 200kHz to 2.2MHz Sepic/Flyback Controller

  • Meets Stringent OEM Module Power Consumption and Performance Specifications
  • 20μA Quiescent Current in Skip Mode
  • ±1.5% FB Voltage Accuracy

  • MAX20499
    Automotive Core Power Supply 5V, 8A/12A Step-Down Converter

  • High-Efficiency DC-DC Converter
  • Up to 12A peak output current:
    • MAX20499A: 8A
    • MAX20499B: 12A
  • Differential Remote Voltage Sensing

  • MAX17823B
    12-Channel High-Voltage Data Acquisition System

    • AEC-Q100 Grade 2 Temperature Range
    • Operating Voltage from 9V to 65V
    • Ultra-Low-Power Operation

    MAX25024
    Automotive Low Input Voltage I2C 4-Channel 150mA Backlight Driver Supporting ASIL B

    • Wide Voltage-Range Operation
    • High Integration
    • Robust and Low EMI

    MAX25613
    Automotive Infrared LED Controller

    • High-Current IR LED Driver with Reduced Peak Current on the Battery Harness
    • Protection Features Increase System Reliability
    • Automotive Ready

    MAX25601C
    Synchronous Boost and Synchronous Buck LED Controllers

    • Integration Minimizes BOM for High-Brightness LED Driver, Saving Space and Cost
    • Wide Dimming Ratio Allows High Contrast Ratio
    • Protection Features and Wide Temperature Range Increase System Reliability

    MAX25601D
    Synchronous Boost and Synchronous Buck LED Controllers

    • Integration Minimizes BOM for High-Brightness LED Driver, Saving Space and Cost
    • Wide Dimming Ratio Allows High Contrast Ratio
    • Protection Features and Wide Temperature Range Increase System Reliability

    MAX25601A
    Synchronous Boost and Synchronous Buck LED Controllers

    • Integration Minimizes BOM for High-Brightness LED Driver, Saving Space and Cost
    • Wide Dimming Ratio Allows High Contrast Ratio
    • Protection Features and Wide Temperature Range Increase System Reliability

    MAX25601B
    Synchronous Boost and Synchronous Buck LED Controllers

    • Integration Minimizes BOM for High-Brightness LED Driver, Saving Space and Cost
    • Wide Dimming Ratio Allows High Contrast Ratio
    • Protection Features and Wide Temperature Range Increase System Reliability

    MAX20075D
    36V, 600mA/1.2A Mini Buck Converter with 3.5µA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • 20ns Minimum On-Time Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

    MAX20076D
    36V, 600mA/1.2A Mini Buck Converter with 3.5µA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • 20ns Minimum On-Time Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

    MAX20076E
    36V, 600mA/1.2A Mini Buck Converter with 3.5µA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • 20ns Minimum On-Time Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

    MAX25276D
    36V, 600mA/1.2A Mini Buck Converter with 3.5µA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • 20ns Minimum On-Time Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing