Top ![]()
MAX17113
Low-Cost Multiple-Output Power Supply for LCD TVs
Low-Cost, Highly Integrated IC for LCD TV Power Supply Minimizes Space and Cost
Maxim Confidential 
MyMaxim SubscriptionsProduct Details
The MAX17113 multiple-output power-supply controller generates all the supply rails for thin-film transistor (TFT) liquid-crystal display (LCD) panels in TVs and monitors operating from a regulated 12V input. It includes a step-down and a step-up regulator, a positive and a negative charge pump, a Dual Mode™ logic-controlled high-voltage switch control block, and an adjustable-timing power-good output. The MAX17113 can operate from 8V to 16.5V input voltages and is optimized for LCD TV panel and LCD monitor applications running directly from 12V supplies.
The step-up and step-down regulators feature internal power MOSFETs and high-frequency operation allowing the use of small inductors and capacitors, resulting in a compact solution. Both switching regulators use fixed-frequency current-mode control architectures, providing fast load-transient response and easy compensation. A current-limit function for internal switches and output-fault shutdown protect the step-up and step-down power supplies against fault conditions. The MAX17113 provides soft-start functions to limit inrush current during startup. The MAX17113 provides adjustable power-up timing.
The positive and negative charge-pump regulators provide TFT gate-driver supply voltages. Both output voltages can be adjusted with external resistive voltage-dividers. The switch control block allows the manipulation of the positive TFT gate-driver voltage.
A series p-channel MOSFET is integrated to sequence power to AVDD after the MAX17113 has proceeded through normal startup, and provides True Shutdown™.
The MAX17113 is available in a small (5mm x 5mm), low-profile (0.8mm), 40-pin thin QFN package and operates over a -40°C to +85°C temperature range.
The step-up and step-down regulators feature internal power MOSFETs and high-frequency operation allowing the use of small inductors and capacitors, resulting in a compact solution. Both switching regulators use fixed-frequency current-mode control architectures, providing fast load-transient response and easy compensation. A current-limit function for internal switches and output-fault shutdown protect the step-up and step-down power supplies against fault conditions. The MAX17113 provides soft-start functions to limit inrush current during startup. The MAX17113 provides adjustable power-up timing.
The positive and negative charge-pump regulators provide TFT gate-driver supply voltages. Both output voltages can be adjusted with external resistive voltage-dividers. The switch control block allows the manipulation of the positive TFT gate-driver voltage.
A series p-channel MOSFET is integrated to sequence power to AVDD after the MAX17113 has proceeded through normal startup, and provides True Shutdown™.
The MAX17113 is available in a small (5mm x 5mm), low-profile (0.8mm), 40-pin thin QFN package and operates over a -40°C to +85°C temperature range.
Key Features
- Optimized for 10.8V to 13.2V Input Supply
- 8V to 16.5V Input Supply Range
- Selectable Frequency (450kHz/600kHz)
- Current-Mode Step-Up Regulator
- Built-In 24V, 3.3A, 80mΩ n-Channel MOSFET
- High-Accuracy Output Voltage (1%)
- True Shutdown
- Fast Load-Transient Response
- High Efficiency
- 10ms Internal Soft-Start
- Current-Mode Step-Down Regulator
- Built-In 24V, 3A, 100mΩ n-Channel MOSFET
- Fast Load-Transient Response
- Adjustable Output Voltage Down to 1.5V
- Skip Mode at Light Load (EN2 = AGND)
- High Efficiency
- 3ms Internal Soft-Start
- Adjustable Positive and Negative Charge-Pump Regulators
- Soft-Start and Timer-Delay Fault Latch for All Outputs
- Logic-Controlled High-Voltage Integrated Switches with Adjustable Delay
- 120mΩ p-Channel FET for AVDD Sequencing
- Input Undervoltage Lockout and Thermal-Overload Protection
- 40-Pin, 5mm x 5mm Thin QFN Package
Applications/Uses
- LCD Monitor Panels
- LCD TV Panels
Technical Docs
| Data Sheet | Low-Cost Multiple-Output Power Supply for LCD TVs | Sep 15, 2009 |
Click any title below to view the detail page where available.
/en/design/design-tools/ee-sim.html?
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal
Parameters
Key Features
- Optimized for 10.8V to 13.2V Input Supply
- 8V to 16.5V Input Supply Range
- Selectable Frequency (450kHz/600kHz)
- Current-Mode Step-Up Regulator
- Built-In 24V, 3.3A, 80mΩ n-Channel MOSFET
- High-Accuracy Output Voltage (1%)
- True Shutdown
- Fast Load-Transient Response
- High Efficiency
- 10ms Internal Soft-Start
- Current-Mode Step-Down Regulator
- Built-In 24V, 3A, 100mΩ n-Channel MOSFET
- Fast Load-Transient Response
- Adjustable Output Voltage Down to 1.5V
- Skip Mode at Light Load (EN2 = AGND)
- High Efficiency
- 3ms Internal Soft-Start
- Adjustable Positive and Negative Charge-Pump Regulators
- Soft-Start and Timer-Delay Fault Latch for All Outputs
- Logic-Controlled High-Voltage Integrated Switches with Adjustable Delay
- 120mΩ p-Channel FET for AVDD Sequencing
- Input Undervoltage Lockout and Thermal-Overload Protection
- 40-Pin, 5mm x 5mm Thin QFN Package
Applications/Uses
- LCD Monitor Panels
- LCD TV Panels
Description
The MAX17113 multiple-output power-supply controller generates all the supply rails for thin-film transistor (TFT) liquid-crystal display (LCD) panels in TVs and monitors operating from a regulated 12V input. It includes a step-down and a step-up regulator, a positive and a negative charge pump, a Dual Mode™ logic-controlled high-voltage switch control block, and an adjustable-timing power-good output. The MAX17113 can operate from 8V to 16.5V input voltages and is optimized for LCD TV panel and LCD monitor applications running directly from 12V supplies.
The step-up and step-down regulators feature internal power MOSFETs and high-frequency operation allowing the use of small inductors and capacitors, resulting in a compact solution. Both switching regulators use fixed-frequency current-mode control architectures, providing fast load-transient response and easy compensation. A current-limit function for internal switches and output-fault shutdown protect the step-up and step-down power supplies against fault conditions. The MAX17113 provides soft-start functions to limit inrush current during startup. The MAX17113 provides adjustable power-up timing.
The positive and negative charge-pump regulators provide TFT gate-driver supply voltages. Both output voltages can be adjusted with external resistive voltage-dividers. The switch control block allows the manipulation of the positive TFT gate-driver voltage.
A series p-channel MOSFET is integrated to sequence power to AVDD after the MAX17113 has proceeded through normal startup, and provides True Shutdown™.
The MAX17113 is available in a small (5mm x 5mm), low-profile (0.8mm), 40-pin thin QFN package and operates over a -40°C to +85°C temperature range.
The step-up and step-down regulators feature internal power MOSFETs and high-frequency operation allowing the use of small inductors and capacitors, resulting in a compact solution. Both switching regulators use fixed-frequency current-mode control architectures, providing fast load-transient response and easy compensation. A current-limit function for internal switches and output-fault shutdown protect the step-up and step-down power supplies against fault conditions. The MAX17113 provides soft-start functions to limit inrush current during startup. The MAX17113 provides adjustable power-up timing.
The positive and negative charge-pump regulators provide TFT gate-driver supply voltages. Both output voltages can be adjusted with external resistive voltage-dividers. The switch control block allows the manipulation of the positive TFT gate-driver voltage.
A series p-channel MOSFET is integrated to sequence power to AVDD after the MAX17113 has proceeded through normal startup, and provides True Shutdown™.
The MAX17113 is available in a small (5mm x 5mm), low-profile (0.8mm), 40-pin thin QFN package and operates over a -40°C to +85°C temperature range.
Technical Docs
| Data Sheet | Low-Cost Multiple-Output Power Supply for LCD TVs | Sep 15, 2009 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal
Request a Quote