MAX77958

Standalone USB Type-C and USB Power Delivery Controller

Industry's Simplest Standalone USB Type-C and USB Power Delivery Controller


Please check latest availability status for a specific part variant.

Description

The MAX77958 is a robust solution for USB Type-C CC detection and power delivery (PD) protocol implementation. It detects connected accessories or devices by using Type-C CC detection and USB PD messaging. The IC protects against overvoltage and overcurrent, and detects moisture and prevents corrosion on the USB Type-C connector. The IC also has a D+/D- USB switch and BC1.2 detection to support legacy USB standards. It contains VCONN switches for USB PD and an enable pin for an external VCONN boost or buck converter.

The IC is compliant with USB Type-C Specification Release 1.3 and PD 3.0. It can be customized easily without affecting the compliance.

The IC has an I2C master that can read and write to other devices in the system so that its firmware can configure related devices without the main processor's assistance. For example, it can configure an external charger based on BC1.2 detection, CC detection, and PD communication.

The IC has an interrupt output pin to report event detection and status changes. It also has an I2C interface that system can use to read/write and configure internal registers.

The IC has nine configurable GPIOs that can be used for detection, as interrupts, and as the enable/disable pin for external devices, or as ADC inputs.

The IC is available in a 3.10mm x 2.65mm, 0.5mm pitch, wafer-level package (WLP).

MAX77958: Simplified Block Diagram MAX77958: Simplified Block Diagram Enlarge+

Key Features

  • Customizable Firmware
    • USB Compliant Default Embedded Firmware
    • Supports Customizable Actions on Events
    • Firmware Updates for Future Specification Revisions
  • USB Type-C Support and USB-PD Support
    • USB Type-C Version 1.3 and PD3.0 Compliant
    • Mode Configuration: Sink/Source/Dual Role Port
    • Programmable Power Supply (PPS) Sink Support
    • Fast Role Swap (FRS) Initial Sink Support
    • Cable Orientation and Power Role Detection
    • Integrated VCONN Switch with OCP
    • Support Try.Snk State
    • Audio and Debug Accessory Sink/Source Mode
  • Supports BC1.2 Legacy/Proprietary Charger Detection
    • Integrated D+/D- Switches
  • Moisture Detection/Corrosion Prevention
  • High Voltage VBUS (28V)
  • Short to VBUS Protection on CC Pins (22V)
  • Dead Battery Support
  • Dual Supply Inputs from SYS and VBUS
  • I2C Programmable Configuration
  • I2C Master to Control External Charger or Direct Charge IC
  • Nine Configurable GPIOs (GPIO6 for SID)
    • SuperSpeed Mux/Detection/IRQ
    • EN/DISABLE External Switches or Devices
  • WLP 6x5 Bumps 0.5mm Pitch Package

Applications/Uses

  • Smartphones
  • Tablets
  • Cameras
  • Game Players
  • Power Banks
  • Industrial Equipment PoE to USB Type-C Adapters
  • Handheld Devices
  • Portable Devices
  • Monitors
  • Healthcare and Medical Devices
  • Other USB Type-C Devices

See parametric specs for USB Charger Detectors (13)


Part Number
MAX77958 NEW!

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX77958EVKIT-2S3: Evaluation Kit for the MAX77958/MAX77962

Technical Documents

User Guide 7139 MAX77958 Customization Script and OPCode Command Guide
Request Reliability Report for: MAX77958 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX25430
Automotive 100W USB-PD Buck-Boost Port Controller and Protector

  • USB-PD PHY That is TCPCI Standard for Use with Any Low-Cost I2C Master Such as Hub IC, MCU or SOC (MAX25430B)
    • Ground-Offset-Adjusted BMC PHY for Maximum Signal-to-Noise Ratio
  • Non-TCPC Versions Available for Protecting External USB-PD Controller (MAX25430A)
  • Integrated Buck-Boost Controller for External H-bridge
    • 4.5V to 36V Input Operating Range
    • Fixed PDO 5V, 9V, 15V, and 20V up to 5.0A
    • 220kHz, 300kHz, or 400kHz Switching Frequency

  • MAX25400
    Automotive Hi-Speed USB 2.0 Protector

    • Targeted Features for Optimized USB Performance
    • Robust for the Automotive Environment
    • Standards

    MAX20459
    Automotive High-Current Step-Down Converter with USB-C Dedicated Charging Port

    • One-Chip Type-C Solution Directly from Car Battery to Portable Device
    • Optimal USB Charging and Communication for Portable Devices
    • Low-Noise Features Prevent Interference with AM Band and Portable Devices

    MAX77958
    Standalone USB Type-C and USB Power Delivery Controller

    • Customizable Firmware
    • USB Type-C Support and USB-PD Support
    • Supports BC1.2 Legacy/Proprietary Charger Detection