Top

3.3V Powered, 10Mbps and Slew-Rate Limited, True RS-485/RS-422 Transceivers

Product Details

Key Features

Parametric specs for RS-485/RS-422 Line Driver/Receivers
# Tx/Rx 1Tx + 1Rx
Duplex Full
VSUPPLY (V) 3.3
Data Rate (kbps) (min) 10000
ICC (mA) (typ) 1
Tx EN No
Rx EN No
Oper. Temp. (°C) -40 to +85
0 to +70
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes)
2.19
View Less

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Parameters

Parametric specs for RS-485/RS-422 Line Driver/Receivers
# Tx/Rx 1Tx + 1Rx
Duplex Full
VSUPPLY (V) 3.3
Data Rate (kbps) (min) 10000
ICC (mA) (typ) 1
Tx EN No
Rx EN No
Oper. Temp. (°C) -40 to +85
0 to +70
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes)
2.19

Key Features

  • Operate from a Single 3.3V Supply-No Charge Pump!
  • Interoperable with +5V Logic
  • 8ns Max Skew (MAX3485/MAX3490/MAX3491)
  • Slew-Rate Limited for Errorless Data Transmission (MAX3483/MAX3488)
  • 2nA Low-Current Shutdown Mode (MAX3483/MAX3485/MAX3486/MAX3491)
  • -7V to +12V Common-Mode Input Voltage Range
  • Allows up to 32 Transceivers on the Bus
  • Full-Duplex and Half-Duplex Versions Available
  • Industry Standard 75176 Pinout (MAX3483/MAX3485/MAX3486)
  • Current-Limiting and Thermal Shutdown for Driver Overload Protection

Applications/Uses

  • Industrial Control Local Area Networks
  • Integrated Services Digital Networks
  • Low-Power RS-485/RS-422 Transceivers
  • Packet Switching
  • Telecommunications
  • Transceivers for EMI-Sensitive Applications

Description

The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate-limited drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission at data rates up to 250kbps. The partially slew-rate-limited MAX3486 transmits up to 2.5Mbps. The MAX3485, MAX3490, and MAX3491 transmit at up to 10Mbps.

Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if both inputs are open circuit.

The MAX3488, MAX3490, and MAX3491 feature full-duplex communication, while the MAX3483, MAX3485, and MAX3486 are designed for half-duplex communication.

Simplified Block Diagram

MAX3483, MAX3485, MAX3486: Typical Application Circuit MAX3483, MAX3485, MAX3486: Typical Application Circuit Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .