Top

±15kV ESD-Protected USB Transceivers in UCSP with USB Detect

Product Details

Key Features

Parametric specs for USB Transceivers
VL (V) 1.65 to 3.6
Supports USB Speed Full-Speed
Internal USB Pullup Resistor (1.5kΩ) Yes
ESD Protect. (±kV) 15
VSUPPLY (V) 4.0 to 5.5
Package/Pins TSSOP/16
Budgetary
Price (See Notes)
1.87
View Less

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.

Parameters

Parametric specs for USB Transceivers
VL (V) 1.65 to 3.6
Supports USB Speed Full-Speed
Internal USB Pullup Resistor (1.5kΩ) Yes
ESD Protect. (±kV) 15
VSUPPLY (V) 4.0 to 5.5
Package/Pins TSSOP/16
Budgetary
Price (See Notes)
1.87

Key Features

  • ±15kV ESD Protection On D+ and D-
  • Comply with USB Specification 1.1 (Full Speed 2.0)
  • Separate VP and VM Inputs/Outputs
  • VL Down to 1.65V Allows Connection with Low-Voltage ASICs
  • Enumerate Input—Allows USB Connection through Software
  • USB Detect Function
    • 3.6V (min) to 4V (max)—MAX3344E
    • 1V (min) to 2.8V (max)—MAX3345E
  • Allow Single-Ended or Differential Logic I/O
  • Internal Linear Regulator Allows Direct Powering from the USB
  • Internal Pullup Resistor for Full-Speed Operation
  • Three-State Outputs
  • No Power-Supply Sequencing Required
  • Driver Active in Suspend Mode
  • Available in Miniature Chip-Scale Package

Applications/Uses

  • Cell Phones
  • Data Cradles
  • Digital Cameras
  • Information Appliances
  • MP3 Players
  • PC Peripherals
  • PDAs

Description

The MAX3344E/MAX3345E USB transceivers convert logic-level signals to USB signals, and USB signals to logic-level signals. An internal 1.5kΩ USB pullup resistor supports full-speed (12Mbps) USB operation. The MAX3344E/MAX3345E provide built-in ±15kV ESD-protection circuitry on the USB I/O pins, D+ and D-, and VCC.

The MAX3344E/MAX3345E operate with logic supply voltages as low as 1.65V, ensuring compatibility with low-voltage ASICs. The suspend mode lowers supply current to less than 40µA. An enumerate function allows devices to logically disconnect while plugged in. The MAX3344E/MAX3345E are fully compliant with USB specification 1.1, and full-speed operation under USB specification 2.0.

The MAX3344E/MAX3345E have a USB detect that monitors the USB bus for insertion and signals this event. The MAX3344E USB_DET threshold is between 3.6V (min) and 4V (max), while the MAX3345E USB_DET threshold is between 1V (min) and 2.8V (max).

The MAX3344E/MAX3345E are available in the miniature 4 x 4 UCSP™, as well as the small 16-pin TSSOP, and are specified over the extended temperature range, -40°C to +85°C.

Simplified Block Diagram

MAX3344E, MAX3345E: Typical Operating Circuit MAX3344E, MAX3345E: Typical Operating Circuit Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.