MAX22513

Surge Protected Dual Driver IO-Link Device Transceiver with DC-DC

Dual Channel Low Power IO-Link Transceiver with Integrated High Efficiency DC/DC


Please check latest availability status for a specific part variant.

Description

MAX22513 Samples

The MAX22513 dual-channel low power IO-Link device transceiver features a selectable control interface, internal high-efficiency DC-DC buck regulator, two internal linear regulators, and integrated surge protection for robust communication. The device features low-on resistance drivers (C/Q and DO/DI), selectable driver current limits, and overcurrent protection to reduce power dissipation in small sensor applications.

The DC-DC buck regulator supplies up to 300mA load current and has an adjustable output voltage (from 2.5V to 12V). Internal linear regulators generate 5V and 3.3V, supplying up to 50mA of current.

The MAX22513 can be controlled using SPI or I2C interfaces, providing flexibility for microcontrollers, and extensive control and diagnostic features. Both full- and half-duplex SPI are supported. The internal MCLK oscillator provides a clock source to a microcontroller for IO-Link communication.

The MAX22513 features extensive integrated protection to ensure robust communication in harsh industrial environments. All four IO pins (V24, C/Q, DO/DI, and GND), are reverse voltage protected, short circuit protected, and feature integrated ±1kV/500Ω surge protection.

The MAX22513 is available in a tiny WLP package (4.1mm x 2.1mm) or 28-pin TQFN-EP package (3.5mm x 5.5mm) and operates over the -40°C to +125°C temperature range.

MAX22513: Typical Application Circuits MAX22513: Typical Application Circuits Enlarge+

Key Features

  • High Configurability and Integration Reduces SKU
    • Configurable C/Q and DO/DI Drivers
      • PNP, NPN, and Push-Pull Modes
      • Individual Slew Rate Control for Drivers
      • Selectable Driver Current Limit: 50mA to 250mA
    • Control and Monitoring with I2C or SPI
      • Half- and Full-Duplex SPI Modes
    • Integrated High-Efficiency DC-DC Buck Regulator
      • Selectable Switching Frequency
        • 921kHz (typ) or 1.229MHz (typ)
      • 300mA (max) Load
      • Output Voltage from 2.5V to 12V
    • Internal 5V and 3.3V Linear Regulators
    • Accurate Oscillator for IO-Link Communication
  • Integrated Protection Enables Robust Systems
    • Integrated ±1kV/500Ω Surge Protection
    • Glitch Filters for Improved Burst Resilience
    • Selectable Overcurrent Configuration
    • Hot-Plug and Reverse Polarity Protection
    • -40°C to +125°C Operating Temperature Range
  • Optimized for Small Sensor Designs
    • Low Power Dissipation:
      • 2Ω (typ) On-Resistance for C/Q and DO/DI Drivers
    • Available in Two Tiny Packages:
      • 28-Pin TQFN-EP (3.5mm x 5.5mm)
      • WLP (4.1mm x 2.1mm)

Applications/Uses

  • Industrial Sensors
  • IO-Link Sensor and Actuator Devices
Part NumberFunctionsVCC
(V)
VCC
(V)
C/Q
(mA)
DO
(mA)
DI Input Threshold
(V)
DI Input Threshold
(V)
Logic-Level Supply Voltage
(V)
Integrated PowerProtection FeaturesPackage/PinsOper. Temp.
(°C)
Budgetary
Price
minmaxtyptyphighlowSee Notes
MAX22513 Device Transceiver93625025011 to 12.59 to 10.52.5 to 5.5
3.3V LDO
5V LDO
Current Limiter
High Temp Warning and Shutdown
Hot Plug Supply Protection
Reverse Current Blocking
Reverse Polarity
Selectable Overcurrent
Short Circuit
UVLO
TQFN-CU/28
WLP/32
-40 to +125$3.75 @1k
See All IO-Link Transceivers and Binary Drivers (12)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX22513EVKIT: Evaluation Kit for the MAX22513

Technical Documents

App Note 6908 Bring Your High Current Sensors to the IO-Link Revolution

Quality and Environmental Data

Request Reliability Report for: MAX22513 
Lead-Free Package Tin (Sn) Whisker Reports

CAD Symbols and Footprints

  • MAX22513ATI+
  • MAX22513ATI+T
  • MAX22513AWJ+
  • MAX22513AWJ+T
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX22503E
    100Mbps Full-Duplex 3V/5V RS-485/RS-422 Transceiver with High EFT Immunity

    • High-Speed Operation
    • Integrated Protection Increases Robustness
    • Flexibility for Many Different Applications