Product Details
The MAX22500E features integrated preemphasis circuitry that extends the distance and increases the data rate of reliable communication by reducing inter-symbol interference(ISI) caused by long cables. The MAX22500E features a flexible logic interface down to 1.6V.
The MAX22501E operates without preemphasis and is powered from a 3V to 5.5V supply.
The MAX22500E is available in a 10-pin TDFN-EP package. The MAX22501E is available in a 8-pin TDFN-EP package.
Both transceivers operate over the -40°C to +125°C ambient temperature range.
Also see the MAX22502E Full-Duplex RS-485/RS-422 Transceiver ›
Design Solution: RS-485: Overcome the Speed vs. Distance Challenge ›
Key Features
- High-Speed Operation Over Long Distances
- Up to 100Mbps Data Rate
- Integrated Preemphasis Extends Cable Length (MAX22500E)
- High Receiver Sensitivity
- Wide Receiver Bandwidth
- Symmetrical Receiver Thresholds
- Integrated Protection Increases Robustness
- -15V to +15V Common Mode Range
- ±15kV ESD Protection (Human Body Model)
- ±7kV IEC 61000-4-2 Air-Gap ESD Protection
- ±6kV IEC 61000-4-2 Contact Discharge ESD Protection
- Withstands up to ±4kV EFT
- Driver Outputs are Short-Circuit Protected
- Flexibility for Many Different Applications
- 3V to 5.5V Supply Range
- Low Voltage Logic Supply Down to 1.6V (MAX22500E)
- Low 5µA (max) Shutdown Current
- Available in 8-pin or 10-pin TDFN Package and an 8-pin µMAX Package
- -40°C to +125°C Operating Temperature Range
Applications/Uses
- Backplane Busses
- Encoder Interfaces
- Field Bus Networks
- Industrial Control Systems
- Motion Control
# Tx/Rx | 1Tx + 1Rx |
Duplex | Half |
VSUPPLY (V) | 3.0 to 5.5 |
Data Rate (kbps) (min) | 100000 |
Fault Protect. (±V) | 15 |
ICC (mA) (typ) | 12.7 |
ESD Protect. (±kV) | 15 |
Tx EN | No |
Rx EN | No |
ICC (Shutdn.) (µA) (typ) | 5 |
Oper. Temp. (°C) | -40 to +125 |
Package/Pins | TDFN-CU/10 |
Budgetary Price (See Notes) | $3.69 @1k |
Technical Docs
Data Sheet | 100Mbps Half-Duplex RS-485/RS-422 Transceivers for Long Cables | Jul 17, 2020 | |
App Note | Full Guide to Serial Communication Protocol and Our RS-485 | ||
App Note | Pre-emphasis Improves RS-485 Communications |
Click any title below to view the detail page where available.
Description
The MAX22501E evaluation kit (EV kit) is a fully assembled and tested PCB that demonstrates the functionality of the MAX22501E half-duplex, high speed RS-485/RS-422 transceiver. The EV kit operates from a single 3V to 5V supply and includes selectable on-board termination.
View DetailsFeatures
- Operates From a Single 3V to 5V Supply
- Terminal Block and RJ45 Connectors for Easy RS-485/RS-422 Evaluation
- Fully Assembled and Tested
Description
The MAX22500E evaluation kit (EV kit) is a fully assembled and tested PCB that demonstrates the functionality of the MAX22500E half-duplex high speed RS-485/RS-422 transceiver with preemphasis functionality. The EV kit operates from a single 5V supply and includes on-board termination.
View DetailsFeatures
- Operates From a Single 5V Supply
- Terminal Block and RJ45 Connectors for Easy RS-485/RS-422 Evaluation
- On-board Selectable Preemphasis Setting
- Fully Assembled and Tested
![]() | SIMULATION MODELS MAX22500E IBIS Model | Download |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal
Parameters
# Tx/Rx | 1Tx + 1Rx |
Duplex | Half |
VSUPPLY (V) | 3.0 to 5.5 |
Data Rate (kbps) (min) | 100000 |
Fault Protect. (±V) | 15 |
ICC (mA) (typ) | 12.7 |
ESD Protect. (±kV) | 15 |
Tx EN | No |
Rx EN | No |
ICC (Shutdn.) (µA) (typ) | 5 |
Oper. Temp. (°C) | -40 to +125 |
Package/Pins | TDFN-CU/10 |
Budgetary Price (See Notes) | $3.69 @1k |
Key Features
- High-Speed Operation Over Long Distances
- Up to 100Mbps Data Rate
- Integrated Preemphasis Extends Cable Length (MAX22500E)
- High Receiver Sensitivity
- Wide Receiver Bandwidth
- Symmetrical Receiver Thresholds
- Integrated Protection Increases Robustness
- -15V to +15V Common Mode Range
- ±15kV ESD Protection (Human Body Model)
- ±7kV IEC 61000-4-2 Air-Gap ESD Protection
- ±6kV IEC 61000-4-2 Contact Discharge ESD Protection
- Withstands up to ±4kV EFT
- Driver Outputs are Short-Circuit Protected
- Flexibility for Many Different Applications
- 3V to 5.5V Supply Range
- Low Voltage Logic Supply Down to 1.6V (MAX22500E)
- Low 5µA (max) Shutdown Current
- Available in 8-pin or 10-pin TDFN Package and an 8-pin µMAX Package
- -40°C to +125°C Operating Temperature Range
Applications/Uses
- Backplane Busses
- Encoder Interfaces
- Field Bus Networks
- Industrial Control Systems
- Motion Control
Description
The MAX22500E features integrated preemphasis circuitry that extends the distance and increases the data rate of reliable communication by reducing inter-symbol interference(ISI) caused by long cables. The MAX22500E features a flexible logic interface down to 1.6V.
The MAX22501E operates without preemphasis and is powered from a 3V to 5.5V supply.
The MAX22500E is available in a 10-pin TDFN-EP package. The MAX22501E is available in a 8-pin TDFN-EP package.
Both transceivers operate over the -40°C to +125°C ambient temperature range.
Also see the MAX22502E Full-Duplex RS-485/RS-422 Transceiver ›
Design Solution: RS-485: Overcome the Speed vs. Distance Challenge ›
Technical Docs
Data Sheet | 100Mbps Half-Duplex RS-485/RS-422 Transceivers for Long Cables | Jul 17, 2020 | |
App Note | Full Guide to Serial Communication Protocol and Our RS-485 | ||
App Note | Pre-emphasis Improves RS-485 Communications |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal