MAX14853

2.75kVRMS Isolated 500kbps/25Mbps Full-Duplex RS-485/RS-422 Transceivers with ±35kV ESD Protection and Integrated Transformer Driver

Industry's Most Robust Isolated RS-485


Description

The MAX14853/MAX14855 isolated RS-485/RS-422 transceivers provide 2750VRMS (60s) of galvanic isolation between the cable-side (RS-485/RS-422 driver/ receiver-side) and the UART-side of the device. Isolation improves communication by breaking ground loops and reduces noise when there are large differences in ground potential between ports. These devices allow for robust communication up to 500kbps (MAX14853) or 25Mbps (MAX14855).

The MAX14853/MAX14855 include an integrated 450kHz transformer driver for power transfer to the cable-side of the transceiver using an external transformer. An integrated LDO provides a simple and space-efficient architecture for providing power to the cable-side of the IC.

The MAX14853/MAX14855 include one drive channel and one receive channel. The receiver is ¼-unit load, allowing up to 128 transceivers on a common bus.

Integrated true fail-safe circuitry ensures a logic-high on the receiver output when inputs are shorted or open. Undervoltage lockout disables the driver when cable-side or UART-side power supplies are below functional levels.

The driver outputs and receiver inputs are protected from ±35kV electrostatic discharge (ESD) to GNDB on the cable-side, as specified by the Human Body Model (HBM).

The MAX14853/MAX14855 are available in a wide body 16-pin SOIC package and operate over the -40°C to +105°C temperature range.

MAX14853, MAX14855: Functional Diagram MAX14853, MAX14855: Functional Diagram Enlarge+

Key Features

  • Higher Integration Simplifies Designs
    • Integrated LDO for Powering Cable-Side
    • Integrated Transformer Driver for Power Transfer to Cable-Side
  • High-Performance Transceiver Enables Flexible Designs
    • Compliant with RS-485 EIA/TIA-485 Standard
    • 500kbps (MAX14853)/25Mbps (MAX14855) Maximum Data Rate
    • Up to 128 Devices on the Bus
    • Slew-Rate Limited Outputs (MAX14853)
    • Integrated Receiver Deglitch Filter Increases Noise Immunity (MAX14853)
  • Integrated Protection Ensures for Robust Communication
    • ±35kV ESD (HBM) on Driver Outputs/Receiver Inputs
    • 2.75kVRMS Withstand Isolation Voltage for 60s (VISO)
    • 630VPEAK Maximum Repetitive Peak Isolation Voltage (VIORM)
    • 445VRMS Maximum Working Isolation Voltage (VIOWM)
    • > 30 Years Lifetime at Rated Working Voltage
    • Withstands ±10kV Surge per IEC 61000-4-5
    • Thermal Shutdown

Applications/Uses

  • HVAC
  • Industrial Automation Equipment
  • Power Meters
  • Programmable Logic Controllers
Part Number Tx/Rx Duplex VSUPPLY
(V)
Galvanic Isolation
(±V)
ICC
(mA)
Data Rate
(kbps)
ESD Protect.
(±kV)
Rx/Tx on Bus Oper. Temp.
(°C)
Package/Pins Budgetary
Price
typ min See Notes
MAX14853  1Tx + 1Rx Full 3.0 to 5.5 2750 4.7 500 35 128 -40 to +105
SOIC HYBRID (W)/16
$3.64 @1k
MAX14855  25000
SOIC HYBRID (W)/16
$4.00 @1k
See All RS-485/RS-422 Line Driver/Receivers (197)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX148X2EVKIT: Evaluation Kit for the MAX14853/MAX14855/MAX14857

Quality and Environmental Data

Product Reliability Reports: MAX14853.pdf 
Lead-Free Package Tin (Sn) Whisker Reports

Tools & Models

MAX14853 IBIS Model

Related Resources


MAX7037
Sub-1GHz Ultra-Low-Power RF ISM Transceiver

  • Ultra-Low-Power Consumption for Battery-Based Operation
  • Worldwide Usable Frequency Band Coverage
  • Fractional-N LO Generation For Multichannel Operation

MAX14856
5kVRMS Isolated 500kbps/25Mbps Full-Duplex RS-485/RS-422 Transceivers with ±35kV ESD Protection

  • High-Performance Transceiver Enables Flexible Designs
  • Integrated Protection Ensures for Robust Communication

MAX14858
5kVRMS Isolated 500kbps/25Mbps Full-Duplex RS-485/RS-422 Transceivers with ±35kV ESD Protection

  • High-Performance Transceiver Enables Flexible Designs
  • Integrated Protection Ensures for Robust Communication

MAX14854
2.75kVRMS Isolated 500kbps/25Mbps Full-Duplex RS-485/RS-422 Transceivers with ±35kV ESD Protection

  • High-Performance Transceiver Enables Flexible Designs
  • Integrated Protection Ensures for Robust Communication

MAX14852
2.75kVRMS Isolated 500kbps/25Mbps Full-Duplex RS-485/RS-422 Transceivers with ±35kV ESD Protection

  • High-Performance Transceiver Enables Flexible Designs
  • Integrated Protection Ensures for Robust Communication

MAX14827A
Low-Power, Ultra-Small, Dual Driver, IO-Link Device Transceiver

  • Low Power Dissipation for Small Sensors
  • High Configurability and Integration Reduce SKUs
  • Selectable Driver Integrated Protection Enables Robust Communication

MAX3488AE
+3.3V-Powered, ±20kV ESD-Protected, 20Mbps and Slew-Rate-Limited RS-485/RS-422 Transceivers

  • Integrated Protection Increases Robustness
  • High-Speed Data Rates up to 20Mbps
  • Up to -40°C to +125°C Operating Temperature
  • Allows Up to 128 Transceivers on the Bus

MAX3485AE
+3.3V-Powered, ±20kV ESD-Protected, 20Mbps and Slew-Rate-Limited RS-485/RS-422 Transceivers

  • Integrated Protection Increases Robustness
  • High-Speed Data Rates up to 20Mbps
  • Up to -40°C to +125°C Operating Temperature
  • Allows Up to 128 Transceivers on the Bus

MAX3490AE
+3.3V-Powered, ±20kV ESD-Protected, 20Mbps and Slew-Rate-Limited RS-485/RS-422 Transceivers

  • Integrated Protection Increases Robustness
  • High-Speed Data Rates up to 20Mbps
  • Up to -40°C to +125°C Operating Temperature
  • Allows Up to 128 Transceivers on the Bus

MAX3483AE
+3.3V-Powered, ±20kV ESD-Protected, 20Mbps and Slew-Rate-Limited RS-485/RS-422 Transceivers

  • Integrated Protection Increases Robustness
  • High-Speed Data Rates up to 20Mbps
  • Up to -40°C to +125°C Operating Temperature
  • Allows Up to 128 Transceivers on the Bus

MAX3491AE
+3.3V-Powered, ±20kV ESD-Protected, 20Mbps and Slew-Rate-Limited RS-485/RS-422 Transceivers

  • Integrated Protection Increases Robustness
  • High-Speed Data Rates up to 20Mbps
  • Up to -40°C to +125°C Operating Temperature
  • Allows Up to 128 Transceivers on the Bus

MAX14948
5kVRMS Isolated 500kbps Half-Duplex RS-485/RS-422 Transceiver with ±30kV ESD Protection

  • High-Performance Transceiver Enables Flexible Designs
  • Integrated Protection Ensure Robust Communication

MAX14945
2.75kVRMS Isolated 500kbps Half-Duplex RS-485/RS-422 Transceiver with ±30kV ESD Protection

  • High-Performance Transceiver Enables Flexible Designs
  • Integrated Protection Ensures Robust Communication

MAX14941
5kVRMS Isolated 20Mbps Half-Duplex PROFIBUS/RS-485 Transceivers with ±35kV ESD Protection

  • High-Performance Transceiver Enables Flexible Designs
  • Integrated Protections Ensures Robust Communication

MAX14942
5kVRMS Isolated 20Mbps Half-Duplex PROFIBUS/RS-485 Transceivers with ±35kV ESD Protection

  • High-Performance Transceiver Enables Flexible Designs
  • Integrated Protections Ensures Robust Communication

MAX14938
2.75kVRMS Isolated 20Mbps Half-Duplex PROFIBUS/RS-485 Transceivers with ±35kV ESD Protection

  • High-Performance Transceiver Enables Flexible Designs
  • Integrated Protections Ensures Robust Communication

MAX14939
2.75kVRMS Isolated 20Mbps Half-Duplex PROFIBUS/RS-485 Transceivers with ±35kV ESD Protection

  • High-Performance Transceiver Enables Flexible Designs
  • Integrated Protections Ensures Robust Communication