IO-Link® is a 3-wire industrial communications standard designed for linking sensors and actuators into control networks. In IO-Link applications, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol while supporting up to 24V digital inputs and outputs. Maxim transceivers support all IO-Link specifications.
Binary drivers use a standard 24V, 3-wire industrial interface. These drivers typically support high-side (pnp), low-side (npn), or push-pull configurations along with normally open (NO) or normally closed (NC) logic. Maxim’s binary drivers integrate transient protection that meets IEC 60255-5 surges up to ±1.3kV as well as OTP programming options to set 3.3V or 5V outputs, the timing of the power-on reset (POR) delay.
September 28, 2017
Check out this new IO-Link handbook for tips on designing IO-Link sensors and masters and ways to improve system performance.
October 03, 2016
March 11, 2021
The annual Assistant Excellence Conference (AEC) provides professional development for Maxim global assistants and is produced by the Maxim assistant community.
March 05, 2021
Learn about two tools to help with power design and inductor selection: Maxim's EE-Sim Design Tool and Würth's REDEXPERT.
February 23, 2021
Greatly reduce power dissipation and shrink form factor with a highly robust integrated digital output solution, the MAX14919.
January 13, 2021
This blog explores an application using a low power SIMO PMIC, the world’s smallest solution size and highest system efficiency, and the story behind it.
December 10, 2020
What does "The Dawn of the Self-aware Machine" really mean? I am sure many are thinking of the human-like robots seen in the movies as a way to further replace people on the factory floor.
October 29, 2020
Formula Student Germany competitors design fierce electric race cars. They’ve relied on Maxim Integrated’s iButton devices for electric car safety.
October 27, 2020
See how the industry’s first true software-configurable universal analog IO solution provides the flexibility to meet industrial automation challenges.
October 26, 2020
Maxim Integrated’s Jeff DeAngelis explains how the COVID-19 pandemic has highlighted what’s needed for manufacturing lines to adapt to changing demands.
September 17, 2020
See how secure authenticators and coprocessors make it easier for you to integrate cryptography to protect your embedded designs.
September 15, 2020
Full ultra-low power GPS solution using the MAX2769C GNSS L1 receiver, and the MAX32632 ARM Cortex M4 microcontroller