IO-Link® is a 3-wire industrial communications standard designed for linking sensors and actuators into control networks. In IO-Link applications, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol while supporting up to 24V digital inputs and outputs. Maxim transceivers support all IO-Link specifications.
Binary drivers use a standard 24V, 3-wire industrial interface. These drivers typically support high-side (pnp), low-side (npn), or push-pull configurations along with normally open (NO) or normally closed (NC) logic. Maxim’s binary drivers integrate transient protection that meets IEC 60255-5 surges up to ±1.3kV as well as OTP programming options to set 3.3V or 5V outputs, the timing of the power-on reset (POR) delay.
September 28, 2017
Check out this new IO-Link handbook for tips on designing IO-Link sensors and masters and ways to improve system performance.
October 03, 2016
March 03, 2022
It is possible to deliver power and data to operate I2C and SPI endpoints, such as humidity or temperature sensors, with the use of a single wire connection and ground using Analog Devices’ 1-Wire technology.
February 17, 2022
Differences between DS2431 and DS28E07.
February 17, 2022
The 1-Wire Silicon Serial Number DS2401 and DS1990A, has suffered supply chain issues. To relieve this issue, Analog Devices has developed the alternatives DS2401A and DS1990AA.
October 13, 2021
Get a better understanding of when and why system reliability is important and how a low-power microcontroller can enhance reliability.
August 14, 2021
This blog discusses power outages and Maxim’s new solution for power backup in battery and line powered systems
May 19, 2021
A combination of the ultra- low power Artificial Intelligence (AI) processor and pattern recognition models greatly enhances smart wake up by detecting one or more people in the field of view with minimum power.
March 11, 2021
The annual Assistant Excellence Conference (AEC) provides professional development for Maxim global assistants and is produced by the Maxim assistant community.
March 05, 2021
Learn about two tools to help with power design and inductor selection: Maxim's EE-Sim Design Tool and Würth's REDEXPERT.
February 23, 2021
Greatly reduce power dissipation and shrink form factor with a highly robust integrated digital output solution, the MAX14919.
January 13, 2021
This blog explores an application using a low power SIMO PMIC, the world’s smallest solution size and highest system efficiency, and the story behind it.