IO-Link® is a 3-wire industrial communications standard designed for linking sensors and actuators into control networks. In IO-Link applications, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol while supporting up to 24V digital inputs and outputs. Maxim transceivers support all IO-Link specifications.
Binary drivers use a standard 24V, 3-wire industrial interface. These drivers typically support high-side (pnp), low-side (npn), or push-pull configurations along with normally open (NO) or normally closed (NC) logic. Maxim’s binary drivers integrate transient protection that meets IEC 60255-5 surges up to ±1.3kV as well as OTP programming options to set 3.3V or 5V outputs, the timing of the power-on reset (POR) delay.
Featured Videos
Dual IO-Link Master Transceiver: MAX14819 Demo
4:48 June 06, 2017
What is IO-Link?
4:58 April 23, 2015
In the Lab: IO-Link Smart Sensor System Demo
7:51 April 13, 2015
Technical Documents
Browse Popular Technical Documents:
Technical Documentation
Latest Blogs
Videos
Introduction to the MAX14829 Low-Power IO-Link Device Transceiver with Dual Drivers
3:05 April 07, 2020
Introduction to the MAX22088 Homebus Transceiver
3:22 August 13, 2020
Introduction to the MAX33072E +3V to +5.5V, Polarity Invert RS-485 Half Duplex Transceiver with ±65V Fault Protection, ±40V CMR, and ±40kV ESD
5:34 August 19, 2020
Smallest 4-Channel I/O-Link Master and RGB Sensor
3:18 November 20, 2014
Introduction to the MAX33012E +5V, 5Mbps CAN Transceiver with ±65V Fault Protection, Fault Detection and Reporting, ±25V CMR, and ±45kV ESD Protection
7:34 April 10, 2020
Learn the Fundamentals of IO-Link Technology
14:34 March 02, 2018
Learn the Fundamentals of IO-Link Technology
14:34 March 02, 2018
Introduction to the MAXM22510/11 2.5kVRMS Complete Isolated RS-485/RS-422 Module Transceiver + Power
3:03 October 05, 2018
Share
Request a Quote