Part Number	Replacement	Explanation

Description

Create a design and simulate using EE-Sim^® tools:

The MAX96701 is a compact serializer in a 4mm x 4mm TQFN package especially suited for automotive camera applications. In high-bandwidth mode, the parallel-clock maximum is 116MHz for 12-bit linear or combined HDR data types.

The embedded control channel operates at 9.6kbps to 1Mbps in I²C mode, allowing programming of serializer, deserializer (SerDes), and camera registers independent of video timing.

For driving longer cables, the IC has programmable pre/deemphasis. Programmable spread spectrum is available on the serial output. The serial output meets ISO 10605 and IEC 61000-4-2 ESD standards. The supply range is 1.7V to 1.9V.

The MAX96701 is available in a 24-pin TQFN package with 0.5mm lead pitch, and operates over the -40°C to +115°C temperature range.

MAX96701: Simplified Block Diagram Enlarge+

Key Features

• Ideal for Safety Camera Applications
  • Works with Low-Cost 50Ω Coax (100Ω STP) Cables
  • Error Detection of Video/Control Data
  • High-Immunity Mode for Robust Control-Channel EMC Tolerance
  • Retransmission of Control Data Upon Error Detection
  • Best-in-Class Supply Current: 88mA (max)
  • Pre/Deemphasis Allows 15m Cable at Full Speed
  • 24-Pin (4mm × 4mm) TQFN Package with 0.5mm Lead Pitch
• High-Speed Data Serialization for Megapixel Cameras
  • Up to 1.74Gbps Serial-Bit Rate
  • 12.5MHz to 87MHz × 14 Bit + H/V Data
• Multiple Modes for System Flexibility
  • 9.6kbps to 1Mbps Control Channel in I²C Mode (with Clock Stretch)
  • Crosspoint Switch Accepts Any Input Bitmap
  • Modes for Encoded VSYNC and HSYNC
• Reduces EMI and Shielding Requirements
  • Programmable Output Spread Spectrum
  • Tracks Spread Spectrum Applied at the Parallel Input
  • 1.7V to 1.9V I/O Supply
• Peripheral Features for Camera Power-Up and Verification
  • Built-In PRBS Generator for BER Testing
  • Dedicated GPO for Camera Frame-Sync Trigger and Other Uses
  • Remote/Local Wake-Up from Sleep Mode
• Meets AEC-Q100 Automotive Specification
  • -40°C to +115°C Operating Temperature
  • >±8kV Contact and >±15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection

Applications/Uses

• Automotive Camera Applications