MAX96700

14-Bit GMSL Deserializer with Coax or STP Cable Input

Compact 1.6Gbps Deserializer with Eye-Width Monitor and CRC Protection of Video and Control Data for ADAS Applications


Please check latest availability status for a specific part variant.

Description

The MAX96700 is a compact deserializer especially suited for automotive camera applications. Features include adaptive equalization and an output crosspoint switch. An embedded control channel operates at 9.6kbps to 1Mbps in UART, I2C, and mixed UART/I2C modes, allowing programming of serializer, deserializer (SerDes), and camera registers, independent of video timing.

The deserializer can track data from a spread-spectrum serial input. The serial input meets ISO 10605 and IEC 61000-4-2 ESD standards. The core supply range is 1.7V to 1.9V and the I/O supply range is 1.7V to 3.6V. The device is available in a 32-pin (5mm × 5mm) TQFN package with 0.5mm lead pitch, and operates over the -40°C to +115°C temperature range.

Key Features

  • Ideal for Safety Camera Applications
    • Works with Low-Cost 50Ω Coax (100Ω STP) Cables
    • Error Detection of Video/Control Data
    • High-Immunity Mode for Robust Control-Channel EMC Tolerance
    • Retransmission of Control Data Upon Error
    • Best-in-Class Supply Current: 190mA (max)
    • Adaptive Equalization for 15m Cable at Full Speed
    • 32-Pin (5mm × 5mm) TQFN Package
    • Horizontal- and Vertical-Sync Encoding and Tracking
  • High-Speed Deserialization for Megapixel Cameras
    • Up to 1.74Gbps Serial-Bit Rate
    • 6.25MHz to 87MHz ×12-Bit + H/V Data
    • 36.66MHz to 116MHz ×12-Bit + H/V Data (through Internal Encoding)
  • Multiple Modes for System Flexibility
    • 9.6kbps to 1Mbps Control Channel in UART, I2C (with Clock Stretch), or UART-to-I2C Modes
    • 2:1 Input Mux for Camera Selection
    • 15 Hardware-Selectable I2C-Device Addresses
    • Pairs with Any Maxim GMSL Serializer
    • Crosspoint Switch Maps Data to any Output
  • Reduces EMI and Shielding Requirements
    • Spread-Spectrum Serial-Input Tracking and Transfer to the Parallel Output
    • 1.7V to 1.9V Core and 1.7V to 3.6V I/O Supply
  • Peripheral Features for System Verification
    • Built-In PRBS Receiver for BER Testing
    • Eye-Width Monitor Allows In-System Test of High-Speed Serial Link
    • Dedicated “Up/Down” GPI for Camera Frame Sync Trigger and Other Uses
  • Meets AEC-Q100 Automotive Specification
    • -40°C to +115°C Operating Temperature Range
    • ±8kV Contact and ±15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection

Applications/Uses

  • Automotive Camera Applications
Part NumberSignal TypeSignal TypeFunctionsRxTxData Rates
(Mbps)
VSUPPLY
(V)
Package/Pins
RxTx
MAX96700 CML
CMOS
LVCMOS
Deserializer1141500
1.8
3.3
THIN QFN/32
TQFN/32
See All High-Speed Interconnect (Differential Signaling) (135)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX96700COAXEVKIT: Evaluation Kit for the MAX96700 with Coax or STP Cable

Quality and Environmental Data

Request Reliability Report for: MAX96700 
Lead-Free Package Tin (Sn) Whisker Reports
Software
MAXSerDesEV-N  
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX9291B
3.12Gbps GMSL Serializer for Coax or STP Output and HDMI Input

  • Ideal for High-Definition Video Applications
    • HDMI 1.4a Input with Integrated Input Equalizer, DDC, and Input Termination
    • Drives Low-Cost 50Ω Coax Cable and FAKRA Connectors or 100Ω STP Cable
    • 104MHz High-Bandwidth Mode Supports 1920 x 720p/60Hz Display with 24-Bit Color
  • Multiple Data Rates for System Flexibility
    • Up to 3.12Gbps Serial-Bit Rate
    • 25MHz to 104MHz Pixel Clock
    • 9.6kbps to 1Mbps Control Channel in UART, Mixed UART/I²C, or I²C Mode with Clock-Stretch Capability
  • Reduces EMI and Shielding Requirements
    • Serial Output Programmable for 100mV to 500mV Single-Ended or 100mV to 400mV Differential
    • Programmable Spread Spectrum Reduces EMI
    • Tracks Spread Spectrum on Input

  • MAX9293B
    3.12Gbps GMSL Serializer for Coax or STP Output and HDMI Input

  • Ideal for High-Definition Video Applications
    • HDMI 1.4a Input with Integrated Input Equalizer, DDC, and Input Termination
    • Drives Low-Cost 50Ω Coax Cable and FAKRA Connectors or 100Ω STP Cable
    • 104MHz High-Bandwidth Mode Supports 1920 x 720p/60Hz Display with 24-Bit Color
  • Multiple Data Rates for System Flexibility
    • Up to 3.12Gbps Serial-Bit Rate
    • 25MHz to 104MHz Pixel Clock
    • 9.6kbps to 1Mbps Control Channel in UART, Mixed UART/I²C, or I²C Mode with Clock-Stretch Capability
  • Reduces EMI and Shielding Requirements
    • Serial Output Programmable for 100mV to 500mV Single-Ended or 100mV to 400mV Differential
    • Programmable Spread Spectrum Reduces EMI
    • Tracks Spread Spectrum on Input

  • MAX9280B
    3.12Gbps GMSL Deserializers for Coax or STP Input and Parallel Output

    • Ideal for High-Definition Video Applications
    • Multiple Data Rates for System Flexibility
    • Reduces EMI and Shielding Requirements

    MAX9276B
    3.12Gbps GMSL Deserializers for Coax or STP Input and Parallel Output

    • Ideal for High-Definition Video Applications
    • Multiple Data Rates for System Flexibility
    • Reduces EMI and Shielding Requirements

    MAX9278B
    3.12Gbps GMSL Deserializers for Coax or STP Input and LVDS Output

    • Ideal for High-Definition Video Applications
    • Multiple Data Rates for System Flexibility
    • Reduces EMI and Shielding Requirements

    MAX9282B
    3.12Gbps GMSL Deserializers for Coax or STP Input and LVDS Output

    • Ideal for High-Definition Video Applications
    • Multiple Data Rates for System Flexibility
    • Reduces EMI and Shielding Requirements

    Type ID Title
    Evaluation Board9903MAX96700COAXEVKIT Evaluation Kit for the MAX96700 with Coax or STP Cable