Top

6.25MHz to 100MHz, 25-Bit GMSL Deserializer for Coax or STP Cable with Line Fault Detect

Rugged 1.5Gbps Deserializer with Line Fault Detect for Coax or STP Cables in a Small 7mm × 7mm TQFN Package

Product Details

Key Features

Parametric specs for High-Speed Interconnect (Differential Signaling)
Signal Type (Rx) CML
Signal Type (Tx) CMOS
LVCMOS
Functions Deserializer
# Rx 1
# Tx 28
Data Rates (Mbps) 1500
VSUPPLY (V) 1.8
3.3
Package/Pins TQFN/48
Budgetary
Price (See Notes)
9.43
View Less

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.

Parameters

Parametric specs for High-Speed Interconnect (Differential Signaling)
Signal Type (Rx) CML
Signal Type (Tx) CMOS
LVCMOS
Functions Deserializer
# Rx 1
# Tx 28
Data Rates (Mbps) 1500
VSUPPLY (V) 1.8
3.3
Package/Pins TQFN/48
Budgetary
Price (See Notes)
9.43

Key Features

  • Ideal for Camera Applications
    • Works with Low-Cost 50Ω Coax Cable and FAKRA Connectors or 100Ω STP
    • Error Detection/Correction
    • 9.6kbps to 1Mbps Control Channel in I2C-to-I2C Mode with Clock Stretch Capability
    • Best-in-Class Supply Current: 90mA (max)
    • Double-Rate Clock for Megapixel Cameras
    • Cable Equalization Allows 15m Cable at Full Speed
    • 48-Pin (7mm x 7mm) TQFN-EP Package with 0.5mm Lead Pitch
  • High-Speed Data Deserialization for Megapixel Cameras
    • Up to 1.5Gbps Serial-Bit Rate with Single or Double Output: 6.25MHz to 100MHz Clock
  • Multiple Control-Channel Modes for System Flexibility
    • 9.6kbps to 1Mbps Control Channel in UART-to-UART or UART-to-I2C Modes
  • Reduces EMI and Shielding Requirements
    • Programmable Spread Spectrum on the Parallel Output Reduces EMI
    • Tracks Spread Spectrum on Serial Input
  • Peripheral Features for Camera Power-Up and Verification
    • Built-In PRBS Checker for BER Testing of the Serial Link
    • Fault Detection of Serial Link Shorted Together, to Ground, to Battery, or Open
    • Two GPIO Ports
    • Dedicated “Up/Down” GPI for Camera Frame Sync Trigger and Other Uses
    • Remote/Local Wake-Up from Sleep Mode
  • Meets Rigorous Automotive and Industrial Requirements
    • -40°C to +105°C Operating Temperature
    • ±10kV Contact and ±15kV Air IEC 61000-4-2 ESD Protection
    • ±10kV Contact and ±30kV Air ISO 10605 ESD Protection

Applications/Uses

  • Automotive Camera Systems

Description

The MAX9240A compact deserializer is designed to interface with a GMSL serializer over 50Ω coax or 100Ω shielded twisted-pair (STP) cable. The device pairs with the MAX9271 or MAX9273 serializers.

The parallel output is programmable for single or double output. Double output strobes out half of a parallel word on each pixel clock cycle. Double output can be used with GMSL serializers that have the double-input feature.

The device features an embedded control channel that operates at 9.6kbps to 1Mbps. Using the control channel, a microcontroller (µC) can program the serializer/deserializer and peripheral device registers at any time, independent of video timing. Two programmable GPIO ports and a continuously sampled GPI input are available.

For use with longer cables, the device has a programmable equalizer. Programmable spread spectrum is available on the parallel output. The serial input meets ISO 10605 and IEC 61000-4-2 ESD standards. The core supply range is 1.7V to 1.9V and the I/O supply range is 1.7V to 3.6V. The device is available in a 48-pin (7mm x 7mm) TQFN-EP package with 0.5mm lead pitch and operates over the -40°C to +105°C temperature range. 

Simplified Block Diagram

MAX9240A: Typical Operating Circuit MAX9240A: Typical Operating Circuit Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.