Top

I²C Port Expander with 4 Push-Pull Outputs and 4 Open-Drain I/Os

Low Operating Supply Voltage I²C Port Expander with 4 Push-Pull Outputs and 4 Open-Drain I/Os

Product Details

Key Features

Parametric specs for I/O Port Expanders
Interface Serial - I2C Compatible
Serial 2-Wire 400kbit
Outputs 4
I/O 4
Reset Input Yes
Interrupt Output Yes
Over Voltage Protection (V) 6
Drive Current (mA) 25
VSUPPLY (V) (min) 1.71
VSUPPLY (V) (max) 5.5
Package/Pins QSOP/16
TQFN/16
Budgetary
Price (See Notes)
1.98
View Less

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Parameters

Parametric specs for I/O Port Expanders
Interface Serial - I2C Compatible
Serial 2-Wire 400kbit
Outputs 4
I/O 4
Reset Input Yes
Interrupt Output Yes
Over Voltage Protection (V) 6
Drive Current (mA) 25
VSUPPLY (V) (min) 1.71
VSUPPLY (V) (max) 5.5
Package/Pins QSOP/16
TQFN/16
Budgetary
Price (See Notes)
1.98

Key Features

  • 400kHz I²C Serial Interface
  • +1.71V to +5.5V Operating Voltage
  • 4 Push-Pull Output Ports Rated at 20mA Sink Current
  • 4 Open-Drain I/O Ports Rated to 20mA Sink Current
  • 4 I/O Ports Are Overvoltage Protected to +6V
  • Transient Changes Are Latched, Allowing Detection Between Read Operations
  • Active-Low INT Output Alerts Change on Inputs
  • AD0 and AD2 Inputs Select from 16 Slave Addresses
  • Low 0.6µA (typ) Standby Current
  • -40°C to +125°C Operating Temperature Range

Applications/Uses

  • Cell Phones
  • Notebooks
  • RAID
  • SAN/NAS
  • Servers

Description

The MAX7323 2-wire serial-interfaced peripheral features eight I/O ports. Four ports are push-pull outputs and the other four are open-drain I/O ports that are overvoltage protected up to +6V independent of the supply voltage.

The four I/O ports configured as inputs are continuously monitored for state changes (transition detection). State changes are indicated by the open-drain active-low INT output. The interrupt is latched, allowing detection of transient changes. When the MAX7323 is subsequently accessed through the serial interface, any pending interrupt is cleared.

The four push-pull and four open-drain outputs are rated to sink 20mA and are capable of driving LEDs.

The active-low RST input clears the serial interface, terminating any I²C communication to or from the MAX7323.

The MAX7323 uses two address inputs with four-level logic to allow 16 I²C slave addresses. The slave address also determines the power-up logic state for the I/O ports, and enables or disables internal 40kΩ pullups for the input ports in groups of two ports.

The MAX7323 is one device in a family of pin-compatible port expanders with a choice of input ports, open-drain I/O ports, and push-pull output ports (see Table 1 in the full data sheet).

The MAX7323 is available in 16-pin QSOP and 16-pin TQFN packages, and is specified over the automotive temperature range (-40°C to +125°C).

Simplified Block Diagram

MAX7323: Typical Application Circuit MAX7323: Typical Application Circuit Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .