MAX72038B

Generation II Enhanced 6.0Gbps 38-PHY SAS Expander

Industry's Most Advanced 6.0Gbps SAS Expander


Please check latest availability status for a specific part variant.

Description

The MAX72038B is a next-generation enhanced 38-PHY, serial-attached SCSI-2 (SAS-2)-compatible expander that operates at 1.5Gbps, 3.0Gbps, and 6.0Gbps (on a PHY-by-PHY basis). This device is used for server and enclosure applications for midrange- and enterprise-storage systems requiring active SAS port expansion.

This device offers an evolutionary upgrade path for systems that currently employ parallel SCSI technology and rely heavily on SCSI-centric software or management solutions. By combining industry-leading I/O, embedded enclosure functions, and a high-performance internal switching architecture, this device provides all the features needed to design, develop, and deploy high-performance SAS storage solutions.

Key Features

  • 1.5Gbps, 3.0Gbps, and 6.0Gbps 38-PHY, Self-Configuring SAS Expander
  • ANSI T10 SAS-2.1/SAS Protocol Layer (SPL) Compliant
  • Automatic Input-Signal Equalization Including Decision Feedback Equalization (DFE)
  • Multiple Programmable Output-Deemphasis Levels
  • Multiple Programmable Output-Voltage Levels
  • Embedded Multicontext MIPS® 4KEc® 32-Bit Microprocessor Used for Local Control and Expander or Vendor-Unique Enclosure Management Functions
  • On-Chip Trace Buffer
  • Internal ECC-Protected User Data SRAM
  • Standard EJTAG Processor Debug Interface
  • Software Compatible with Other Maxim Enclosure Management Processors
  • Two Operating Modes for External Program Memory: Parallel Memory and Serial Peripheral Interface (SPI™) Memory
  • SPI Interface for Accessing an External Serial Flash Memory Device with Optional Dual/Quad I/O SPI Support
  • Auxiliary SPI Port for Access to Peripheral SPI Devices (Manual Access Only)
  • Integrated PHY Snooping on multiple channels
  • Flexible SAS-2 Compliant Address-Based Zoning
  • Supports Table Routing to Destination Addresses
  • Supports SAS-2 Table-to-Table Routing
  • SMP and SSP Virtual PHY Target/Initiator Capability
  • STP/SATA Bridging Supporting Multiple Affiliations (One Per PHY)
  • STP Initiator Capability
  • SAS-2.1/SPL Optical Link Mode
  • SAS-2.1/SPL Power Management
  • LPC Interface for Trusted Platform Modules
  • Unlimited Variable Wide-Port Capability
  • Extensive Diagnostic and Built-In Self-Test (BIST) Capabilities
  • Multimaster I²C Interfaces—I²C High-Speed and 10-Bit Device ID Support
  • Multirate UARTs with Modem Control
  • 10/100 Ethernet Media-Access Controllers (MACs) with Reduced Media-Independent Interface (RMII)
  • Flexible General-Purpose Input/Output (GPIO) for LEDs, Fan Tachometer, and Other Functions
  • SFF-8485 Serial I/O Support
  • Analog-to-Digital Converters (ADCs)
  • Digital Temperature Monitor
  • 75MHz or 150MHz LVTTL/LVPECL Reference Clock
  • 1.0V DC, 1.8V DC, and 3.3V DC External Power Supplies
  • Low Power CMOS
  • 35mm x 35mm, 924-pin FCBGA Package with Heat Spreader (1.0mm Pin Pitch)
  • RoHS-Compliant Package

Applications/Uses

  • Enterprise-Storage Environments
  • Fabric-Attached Storage (FAS) Systems
  • Fixed-Content Storage Systems
  • JBOD Arrays
  • Near-Line Storage-Replacement Systems
  • Network-Attached Storage (NAS) Systems
  • Rack-Mounted Servers with RAID
  • Storage-Area Network (SAN) Appliances

Quality and Environmental Data

Request Reliability Report for: MAX72038B 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX20463
Automotive USB Type-A to Type-C Port Converter with Protection

  • USB Type-C R1.3 compliance with integrated VBUS Discharge
  • Designed for Cooperative Protection with Head-Unit Protector
  • Robust Design Keeps Vehicle System and Portable Devices Safe in Automotive Environment

MAX20461
Automotive High-Current Step-Down Converter with USB-C Protection/Host Charger

  • One-Chip Type-C Solution Directly from Car Battery to Portable Device
  • Optimal USB Charging and Communication for Portable Devices
  • Low-Noise Features Prevent Interference with AM Band and Portable Devices

MAX22513
Surge Protected Dual Driver IO-Link Device Transceiver with DC-DC

  • High Configurability and Integration Reduces SKU
  • Integrated Protection Enables Robust Systems
  • Optimized for Small Sensor Designs

MAX16972, MAX16972A
3A Automotive Hi-Speed USB Protectors with Apple iPhone/iPad and USB 2.0 Charge Detection

  • Minimized Voltage Drop on Bus Line Due to Industry- Leading RDS(ON) Helps Meet USB Voltage Specifications at Device Connector
  • Robust Overvoltage and ESD Protection for Automotive Environment Saves on External Protection Components
  • Automatic Transitioning of Charge Modes Through Intelligent State Machine for Seamless Device Integration

MAX16972A
3A Automotive Hi-Speed USB Protectors with Apple iPhone/iPad and USB 2.0 Charge Detection

  • Minimized Voltage Drop on Bus Line Due to Industry- Leading RDS(ON) Helps Meet USB Voltage Specifications at Device Connector
  • Robust Overvoltage and ESD Protection for Automotive Environment Saves on External Protection Components
  • Automatic Transitioning of Charge Modes Through Intelligent State Machine for Seamless Device Integration


Electronics in Vehicles (ELIV) 2019
10/16/2019 - 10/17/2019, Bonn, Germany
The international VDI Congress ELIV (Electronics In Vehicles) is THE event for all experts in the field of electrical and electronical car engineering and integration of mechanical and electronical systems.

RSVP