DS21T07

SCSI Terminator


Please check latest availability status for a specific part variant.

Description

The DS21T07 is backward-compatible with the DS2107, DS2107A, and DS21S07 providing precision resistance values for SCSI-1, Fast, and Ultra SCSI with 2% tolerance on the resistors and voltage regulator.

The DS21T07 actively terminates cable segments in SCSI systems carrying nine single-ended drivers and receivers. In an 8-bit wide SCSI arrangement, two DS21T07s connected at each end of the SCSI cable can terminate 18 active signal lines. A 16-bit wide SCSI arrangement requires three DS21T07s at each end to terminate 27 active signal lines.

SCSI termination is used wherever data must be transmitted without voltage drops caused by signal reflection at the parallel bus termination point, which is often significant in multidropped systems.

All Dallas terminators feature power-down mode with extremely low-quiescent consumption. Different SCSI terminators are available to match every existing SCSI protocol and to address different design concerns, such as price, board space, and voltage differential.

The DS21T07 gives the end user more margin for configuration because it allows maximum current into the SCSI bus. Where board space is a problem it’s available in a TSSOP package.

Key Features

  • Fully compliant with SCSI-1, Fast, and Ultra SCSI standards
  • Backward-compatible with DS2107 and DS2107A
  • Provides active signal termination for 9 lines
  • Handles actively negated SCSI signals
  • Laser-trimmed, precision 110-ohm resistors with 2% tolerance
  • 2% tolerance on voltage regulator
  • Low drop-out voltage
  • Low standby current consumption of 100µA
  • Power-down mode with resistors isolated from bus
  • SCSI bus hot-plug compatible
  • Onboard thermal shutdown circuitry
  • Operating range:
    • 0°C to +70°C
    • 4.0V to 5.5V

Quality and Environmental Data

Product Reliability Reports: DS21T07.pdf 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX22702D
Ultra-High CMTI Isolated Gate Drivers

  • Matching Propagation Delay
  • High CMTI (300kV/μs, typ)
  • Robust Galvanic Isolation

MAX22702E
Ultra-High CMTI Isolated Gate Drivers

  • Matching Propagation Delay
  • High CMTI (300kV/μs, typ)
  • Robust Galvanic Isolation

MAX22701D
Ultra-High CMTI Isolated Gate Drivers

  • Matching Propagation Delay
  • High CMTI (300kV/μs, typ)
  • Robust Galvanic Isolation

MAX22701E
Ultra-High CMTI Isolated Gate Drivers

  • Matching Propagation Delay
  • High CMTI (300kV/μs, typ)
  • Robust Galvanic Isolation

MAX22700E
Ultra-High CMTI Isolated Gate Drivers

  • Matching Propagation Delay
  • High CMTI (300kV/μs, typ)
  • Robust Galvanic Isolation

MAX22700D
Ultra-High CMTI Isolated Gate Drivers

  • Matching Propagation Delay
  • High CMTI (300kV/μs, typ)
  • Robust Galvanic Isolation

MAX22515
IO-Link Transceiver with Integrated Protection

  • High Configurability and Integration Reduces SKU
  • Integrated Protection Enables Robust Systems
  • Optimized for Small Designs

MAX22503E
100Mbps Full-Duplex 3V/5V RS-485/RS-422 Transceiver with High EFT Immunity

  • High-Speed Operation
  • Integrated Protection Increases Robustness
  • Flexibility for Many Different Applications

MAX96715
13-Bit GMSL Serializer with High-Immunity/ Bandwidth Mode and Coax/STP Cable Drive

  • Ideal for Safety Camera Applications
    • Works with Low-Cost 50Ω Coax (100Ω STP) Cables
    • Error Detection of Video/Control Data
    • High-Immunity Mode for Robust Control-Channel EMC Tolerance
  • High-Speed Data Serialization for Megapixel Cameras
    • Up to 1.74Gbps Serial-Bit Rate
    • 12.5MHz to 116MHz x 12-Bit + H/V Data through Internal Encoding
  • Multiple Modes for System Flexibility
    • 9.6kbps to 1Mbps Control Channel in I²C Mode (with Clock Stretch)
    • Crosspoint Switch Accepts Any Input Bitmap
    • Modes for Encoded VSYNC and HSYNC


  • Belle Isle 2020
    05/29/2020 - 05/31/2020, Detroit, MI
    2020 Detroit Grand Prix - Chevrolet Detroit Grand Prix presented by Lear Fast Facts The Chevrolet Detroit Grand Prix presented by Lear was hosted on Belle Isle, May 29 - 30 2020. The event featured the cars of the NTT IndyCar Series, the IMSA WeatherTech SportsCar Championship and the Trans Am Series presented by Pirelli. The weekend is collectively referred to as the Chevrolet Detroit Grand Prix presented by Lear and it once again featured the Chevrolet Dual in Detroit IndyCar doubleheader.

    RSVP