DS9100

Touch and Hold Probe Stampings


Please check latest availability status for a specific part variant.

Description

The DS9100 touch and hold probe stampings' function is similar to the DS9098 iButton® retainer. An F5 MicroCan™ will fit completely into the DS9098, but the flange and about one-third of the can will extend out if pressed into the DS9100. As a probe, the DS9100A together with the coiled spring DS9100C allows reading iButtons on contact. With additional pressure, the stiff springs of the DS9100A's outer ring will deflect and grip the MicroCan sufficiently to provide a continuous contact to both the can rim (ground) and the can lid (data). If reading on contact is not required, the cantilever-type center contact DS9100B can be used rather than the DS9100C.
  Enlarge+

Key Features

  • Compact two-piece, all-metal receptacle for F5 MicroCan
  • Accepts two-thirds of the MicroCan (one-third of MicroCan will extend out)
  • Allows reading iButtons with either momentary or dwelled contact
  • Outer ring will hold MicroCan for dwelled contact
  • Two options for data contact: cantilever (DS9100B) or coiled spring (DS9100C)
  • >10000 insertion/withdrawal cycles with no performance degradation
  • Redundancy of contacts and high contact force ensure reliability
  • Probe withstands high temperatures required for printed circuit board (PCB) solder reflow operations
  • Material is stainless steel with selective tin lead plating for optimal solderability to PCB
  • Cleaning fluids drain freely for quick clean up
Part NumberOverview
DS9100A 
Touch and Hold Probe Stampings A
DS9100B 
Touch and Hold Probe Stampings B
DS9100C 
Touch and Hold Probe Stampings C
See All iButton Readers and Adapters (24)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Quality and Environmental Data

Product Reliability Reports: DS9100.pdf 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


Belle Isle 2020
05/29/2020 - 05/31/2020, Detroit, MI
2020 Detroit Grand Prix - Chevrolet Detroit Grand Prix presented by Lear Fast Facts The Chevrolet Detroit Grand Prix presented by Lear was hosted on Belle Isle, May 29 - 30 2020. The event featured the cars of the NTT IndyCar Series, the IMSA WeatherTech SportsCar Championship and the Trans Am Series presented by Pirelli. The weekend is collectively referred to as the Chevrolet Detroit Grand Prix presented by Lear and it once again featured the Chevrolet Dual in Detroit IndyCar doubleheader.

RSVP