Passive Serial Port iButton Holder

Please check latest availability status for a specific part variant.


The DS1413 performs RS232-level conversion and generates 1-Wire® communication signals. With a TMEX software driver, the adapter enables an IBM®-type PC to directly read and write any non-EPROM 1-Wire devices and read all EPROM-based iButtons. The serial port must be able to support a data rate of 115.2kbits/s for a maximum effective 1-Wire transfer rate of 14.4kbits/second (regular speed). Includes DS9098 retainer for single F5 MicroCan and can replace the DS9097 in applications that use only a single iButton®. Multiple iButtons can be connected to the DS1413 using a DS1402D-DB8 Blue Dot™ Receptor or similar cable together with a DS1401 iButton holder.
DS1413: Passive Serial Port iButton Holder DS1413: Passive Serial Port iButton Holder Enlarge+

Key Features

  • Small-size, low-cost RS232C COM Port interface for iButtons®
  • Reads all and writes to non-EPROM iButtons at regular speed
  • Powered entirely from RS232 interface
  • Standard female COM port connector
Product Reliability Reports: DS1413.pdf 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources