DS1411, DS1411-009, DS1411-S09

Serial Port iButton Holder


Please check latest availability status for a specific part variant.

Description

The DS1411 is a sophisticated RS-232-to-1-Wire® adapter and iButton holder that performs RS-232-level conversion and actively generates the 1-Wire communication signals. Together with an adequate software driver, it enables a Windows®-based PC to directly read all and write any non-EPROM iButton devices. The DS1411 has a DS9098P retainer for a single F5 MicroCan. For a list of suitable 1-Wire network cables, e.g., to connect multiple iButtons, refer to the Connectivity Matrix table in the DS1402x 1-Wire network cables data sheet. 1-Wire communication is supported by the adapter for standard speed as well as overdrive speed. The serial port must support a data transmission rate of 9600 bits/s. Under software control, the adapter can be set up for RS-232 data rates of 19200bps, 57600bps, and 115200bps. The two higher rates are recommended for communication at overdrive speed with overdrive capable devices. Since the DS1411 operates in a byte mode, every data byte received from the RS-232 port generates eight time slots on the 1-Wire bus. The DS1411 is based on the DS2480B serial 1-Wire line driver chip. The RXD/TXD polarity select input of the DS2480B is connected to VDD (noninverting). Free software drivers can be downloaded from .
DS1411, DS1411-009, DS1411-S09: Serial Port iButton Holder DS1411, DS1411-009, DS1411-S09: Serial Port iButton Holder Enlarge+

Key Features

  • Small Size, True-Ground Interface to an RS-232 COM Port for Reading and Writing iButton® Devices
  • CE and FCC Compliant
  • Works with Bipolar Logic Signals of ±5V to ± 12V (RS-232C) as well as Unipolar Signals of 5V to 12V
  • Supports Reading and Writing at Standard and Overdrive Speeds
  • Provides Strong Pullup to 5V for Temperature iButton and EEPROM iButton
  • Communicates at Data Rates of 9.6kbps (default), 19.2kbps, 57.6kbps, and 115.2kbps
  • Powered Entirely from an RS-232 Interface
  • Standard DB9 Female Connector for Mating to the COM Port of a Computer with DS9098P iButton Retainer for a Single iButton
  • Includes DS2502 Identification Chip (DS1411-009 Version Only)

See parametric specs for iButton Readers and Adapters (24)


Part NumberFeaturesBudgetary
Price
See Notes
DS1411-009 
F5 Package Compatible
RS-232 Port Adapters
With ID
$32.36 @1k
DS1411-S09 
F5 Package Compatible
RS-232 Port Adapters
$33.31 @1k

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
Product Reliability Reports: DS1411.pdf 
Request Reliability Report for: DS1411-009  DS1411-S09 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources