DS28C16EVKIT

Evaluation Kit for the DS28C16 and DS2477


Please check latest availability status for a specific part variant.

Description

The DS28C16 evaluation kit (EV kit) provides the hardware and software necessary to exercise the features of the DS28C16. The EV system consists of five DS28C16 and DS2477 devices in an 8- and 6-pin TDFN package, respectively, a DS9121DQ+ and DS9121BQ+ evaluation TDFN socket board, and a DS9481P-300# USB-to-I2C/1-Wire® adapter. The evaluation software runs under Windows® 10, Windows 8, and Windows 7 operating systems, both 64-bit and 32-bit versions. It provides a handy user interface to exercise the features of the DS28C16.

DS28C16EVKIT: Board Photo DS28C16EVKIT: Board Photo Enlarge+

Key Features

  • Demonstrates the Features of the DS28C16 DeepCover® SHA-3 I2C Authenticator
  • Logs I2C Communication to Aid Firmware Designer’s Understanding of the DS28C16
  • 1-Wire/I2C USB Adapter Creates a Virtual COM Port on Any PC
  • Fully Compliant with USB Specification v2.0
  • Software Runs on Windows 10, Windows 8, and Windows 7
  • Convenient On-Board Test Points and TDFN Socket

Applications/Uses

  • Accessory and Peripheral Secure Authentication
  • Battery Authentication and Charge Cycle Tracking
  • Medical Tools/Accessories Authentication and Calibration

Tools & Models

  • DS28C16EVKIT Gerber Files
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    DS2488
    1-Wire Dual-Port Link

    • Two-Contact Solution Enables Advance TWS Features
    • Full Range of Capabilities for Earbud and Charging Case Detection
    • Minimalist Dual 1-Wire Interface Reduces Cost and Complexity

    DS28E18
    1-Wire® to I2C/SPI Bridge with Command Sequencer

    • Operate Remote I2C or SPI Devices Using Single-Contact 1-Wire Interface
    • No External Power Required
    • Flexible 1-Wire and I2C/SPI Master Operational Modes
    • Easy to Integrate

    DS28C16
    I²C Low-Voltage SHA-3 Authenticator

    • Robust Countermeasures Protect Against Security Attacks
    • Efficient Secure Hash Algorithm Authenticates Peripherals
    • Supplemental Features Enable Easy Integration into End Applications