Product Details
These transmitter ICs offer a high level of integration while minimizing the number of external components. This is achieved by full integration of the transmit modulator, power amplifier, RF VCO, 8-channel frequency synthesizer, and baseband PN sequence lowpass filter. By filtering the BPSK modulation, the spurious emissions are reduced, enabling up to eight independent transmit channels in the U.S. ISM band. Inputs are provided for spread-spectrum BPSK, ASK, and OOK. FM can be achieved by directly modulating the VCO. The devices are intended primarily for use with an external differential antenna.
Key Features
- Versions for U.S. 902MHz to 928MHz Band and European 868MHz Band
- -7dBm to +23dBm Adjustable Differential RF Output Power
- +23dBm Output Power at 4.5V, +20dBm Output Power at 3.0V
- Support BPSK, OOK, ASK, and FM Modulations
- Modulation Filter for Direct Sequence BPSK up to 8Mchips/s
- Fully Integrated VCO with On-Chip Tank
- Extremely Low Frequency Pulling for OOK Modulation (typ 60kHz peak, 5kHz RMS)
- Integrated Frequency Synthesizer for up to 8 Channels (MAX2900)
- +2.7V to +4.5V Supply Operation
- Small 28-Pin QFN Package with Exposed Pad (5mm x 5mm)
Applications/Uses
- Automatic Meter Reading
- Wireless Building Control
- Wireless Data Networks
- Wireless Security Systems/Alarms
- Wireless Sensors
Band/ Freq. (MHz) | 902 to 928 |
Tx Output Power (dBm) (max) | -7 to +23 |
Modulation Mode | ASK BPSK FM OOK |
VSUPPLY (V) | 2.7 to 4.5 |
Package/Pins | TQFN/28 |
Budgetary Price (See Notes) | $3.64 @1k |
Technical Docs
Data Sheet | 200mW Single-Chip Transmitter ICs for 868MHz/915MHz ISM Bands | Nov 14, 2012 | |
Tutorial | RF Basics | ||
Tutorial | General Layout Guidelines for RF and Mixed-Signal PCBs | ||
Tutorial | Introduction to Hearing Aids and Important Design Considerations | ||
Tutorial | Tracking Advances in VCO Technology |
Click any title below to view the detail page where available.
Description
The MAX2900-MAX2904 evaluation kits (EV kits) simplify testing of the MAX2900-MAX2904. The EV kits allow evaluation of the MAX2900-MAX2904's BPSK, OOK, ASK, and FM modulations; and fully integrated VCO, modulation filter, integrated frequency synthesizer, and power-management features.
The EV kits provide 50Ω SMA connectors for IF inputs and RF outputs. All critical peripheral components are included, and all EV kits are fully assembled and tested.
Features
- Single-Supply Operation
- 50Ω SMA Connectors on all IF and RF Ports
- Baluns Included for Single-Ended RF Output
- Easy Evaluation of BPSK, OOK, ASK, and FM Modulations
- Digital Control Synthesizer Programming (MAX2900)
- Four Modes of Operation
- Shutdown
- Synthesizer
- Transmit
- Reference Only
Description
The MAX2900-MAX2904 evaluation kits (EV kits) simplify testing of the MAX2900-MAX2904. The EV kits allow evaluation of the MAX2900-MAX2904's BPSK, OOK, ASK, and FM modulations; and fully integrated VCO, modulation filter, integrated frequency synthesizer, and power-management features.
The EV kits provide 50Ω SMA connectors for IF inputs and RF outputs. All critical peripheral components are included, and all EV kits are fully assembled and tested.
Features
- Single-Supply Operation
- 50Ω SMA Connectors on all IF and RF Ports
- Baluns Included for Single-Ended RF Output
- Easy Evaluation of BPSK, OOK, ASK, and FM Modulations
- Digital Control Synthesizer Programming (MAX2900)
- Four Modes of Operation
- Shutdown
- Synthesizer
- Transmit
- Reference Only
Description
The MAX2900-MAX2904 evaluation kits (EV kits) simplify testing of the MAX2900-MAX2904. The EV kits allow evaluation of the MAX2900-MAX2904's BPSK, OOK, ASK, and FM modulations; and fully integrated VCO, modulation filter, integrated frequency synthesizer, and power-management features.
The EV kits provide 50Ω SMA connectors for IF inputs and RF outputs. All critical peripheral components are included, and all EV kits are fully assembled and tested.
Features
- Single-Supply Operation
- 50Ω SMA Connectors on all IF and RF Ports
- Baluns Included for Single-Ended RF Output
- Easy Evaluation of BPSK, OOK, ASK, and FM Modulations
- Digital Control Synthesizer Programming (MAX2900)
- Four Modes of Operation
- Shutdown
- Synthesizer
- Transmit
- Reference Only
Description
The MAX2900-MAX2904 evaluation kits (EV kits) simplify testing of the MAX2900-MAX2904. The EV kits allow evaluation of the MAX2900-MAX2904's BPSK, OOK, ASK, and FM modulations; and fully integrated VCO, modulation filter, integrated frequency synthesizer, and power-management features.
The EV kits provide 50Ω SMA connectors for IF inputs and RF outputs. All critical peripheral components are included, and all EV kits are fully assembled and tested.
Features
- Single-Supply Operation
- 50Ω SMA Connectors on all IF and RF Ports
- Baluns Included for Single-Ended RF Output
- Easy Evaluation of BPSK, OOK, ASK, and FM Modulations
- Digital Control Synthesizer Programming (MAX2900)
- Four Modes of Operation
- Shutdown
- Synthesizer
- Transmit
- Reference Only
Description
The MAX2900-MAX2904 evaluation kits (EV kits) simplify testing of the MAX2900-MAX2904. The EV kits allow evaluation of the MAX2900-MAX2904's BPSK, OOK, ASK, and FM modulations; and fully integrated VCO, modulation filter, integrated frequency synthesizer, and power-management features.
The EV kits provide 50Ω SMA connectors for IF inputs and RF outputs. All critical peripheral components are included, and all EV kits are fully assembled and tested.
Features
- Single-Supply Operation
- 50Ω SMA Connectors on all IF and RF Ports
- Baluns Included for Single-Ended RF Output
- Easy Evaluation of BPSK, OOK, ASK, and FM Modulations
- Digital Control Synthesizer Programming (MAX2900)
- Four Modes of Operation
- Shutdown
- Synthesizer
- Transmit
- Reference Only
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal
Parameters
Band/ Freq. (MHz) | 902 to 928 |
Tx Output Power (dBm) (max) | -7 to +23 |
Modulation Mode | ASK BPSK FM OOK |
VSUPPLY (V) | 2.7 to 4.5 |
Package/Pins | TQFN/28 |
Budgetary Price (See Notes) | $3.64 @1k |
Key Features
- Versions for U.S. 902MHz to 928MHz Band and European 868MHz Band
- -7dBm to +23dBm Adjustable Differential RF Output Power
- +23dBm Output Power at 4.5V, +20dBm Output Power at 3.0V
- Support BPSK, OOK, ASK, and FM Modulations
- Modulation Filter for Direct Sequence BPSK up to 8Mchips/s
- Fully Integrated VCO with On-Chip Tank
- Extremely Low Frequency Pulling for OOK Modulation (typ 60kHz peak, 5kHz RMS)
- Integrated Frequency Synthesizer for up to 8 Channels (MAX2900)
- +2.7V to +4.5V Supply Operation
- Small 28-Pin QFN Package with Exposed Pad (5mm x 5mm)
Applications/Uses
- Automatic Meter Reading
- Wireless Building Control
- Wireless Data Networks
- Wireless Security Systems/Alarms
- Wireless Sensors
Description
These transmitter ICs offer a high level of integration while minimizing the number of external components. This is achieved by full integration of the transmit modulator, power amplifier, RF VCO, 8-channel frequency synthesizer, and baseband PN sequence lowpass filter. By filtering the BPSK modulation, the spurious emissions are reduced, enabling up to eight independent transmit channels in the U.S. ISM band. Inputs are provided for spread-spectrum BPSK, ASK, and OOK. FM can be achieved by directly modulating the VCO. The devices are intended primarily for use with an external differential antenna.
Technical Docs
Data Sheet | 200mW Single-Chip Transmitter ICs for 868MHz/915MHz ISM Bands | Nov 14, 2012 | |
Tutorial | RF Basics | ||
Tutorial | General Layout Guidelines for RF and Mixed-Signal PCBs | ||
Tutorial | Introduction to Hearing Aids and Important Design Considerations | ||
Tutorial | Tracking Advances in VCO Technology |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal