MAX2674

GPS/GNSS LNAs with Antenna Switch and Bias

Low-Noise-Figure GPS LNAs in an Ultra-Small WLP Package with Autosensing Bypass Switch


Please check latest availability status for a specific part variant.

Description

The MAX2674/MAX2676 are ultra-small, high-IP3, low-noise amplifiers (LNAs) designed for GPS L1, Galileo, and GLONASS applications. Designed in Maxim's advanced SiGe process, the devices are also equipped with an autosensing feature for applications that enable the use of external antennas. These high-performance LNAs provide high gain and an ultra-low noise figure while optimizing the input-referred 2dB compression point and 3rd-order intercept point.

The ultra-small size is ideal for front-end modules and receiver applications in cellular phones, smartphones, PDAs, PNDs, or other custom GNSS applications. The MAX2674/MAX2676 operate from a 1.6V to 3.6V single supply. The MAX2674 is optimized for high gain, while the MAX2676 is optimized for high linearity. A shutdown feature is present in both devices reducing the supply current to less than 10µA. The antenna port automatically senses when an external antenna is connected, eliminating the need for additional control circuitry while also providing improved short-circuit protection. The MAX2674/MAX2676 are available in an ultra-small, RoHS-compliant 0.86mm x 1.26mm x 0.64mm wafer-level package (WLP).
MAX2674, MAX2676: Typical Operating Circuit MAX2674, MAX2676: Typical Operating Circuit Enlarge+

Key Features

  • Eliminates Discrete Antenna Sensing, Switching, and Bias Networks
    • Autodetects Antenna Connection
    • Provides Antenna Bias
    • Short-Circuit Protection
  • Wide 1.6V to 3.6V Supply Voltage Range
  • Ultra-Small Footprint (0.86mm x 1.26mm) WLP Package
  • For Applications Without Antenna Port, Use Pin-Compatible 4-Bump MAX2686/MAX2687/MAX2688 LNA

Applications/Uses

  • Cellular and Smartphones
  • Front-End SAW Modules
  • Personal Navigation Devices (PNDs)
  • Receiver Modules
  • Recreational, Marine Navigation
  • Telematics (Asset Tracking and Management)
Part NumberRF Freq.
(MHz)
RF Freq.
(MHz)
Noise Figure
(dB)
Gain
(dB)
Input IP3
(dBm)
ISUPPLY
(mA)
Footprint
(mm x mm)
Package/PinsBudgetary
Price
minmaxSee Notes
MAX2674 157515750.7518-24.50.86 x 1.26
WLP/6
$187.50 @1k
MAX2676 15-
WLP/6
$50.00 @1
See All Low-Noise Amplifiers (45)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Technical Documents

Tutorial 5100 General Layout Guidelines for RF and Mixed-Signal PCBs

Quality and Environmental Data

Product Reliability Reports: MAX2674.pdf 
Lead-Free Package Tin (Sn) Whisker Reports

Additional Resources

MAX2674
Bill of Materials
Schematic

MAX2676
Bill of Materials
Schematic


CAD Symbols and Footprints

  • MAX2674EWT+
  • MAX2674EWT+T
  • MAX2674EWT+T10
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX5871
    16-Bit, 5.9Gsps Interpolating and Modulating RF DAC with JESD204B Interface

    • Simplifies RF Design and Enables New Wireless Communication Architectures
    • Direct RF Synthesis of 600MHz Bandwidth Up to 2.8GHz
    • Highly Flexible and Configurable