MAX2656

1575MHz/1900MHz Variable-IP3 Low-Noise Amplifiers


Please check latest availability status for a specific part variant.

Description

The MAX2654/MAX2655/MAX2656 high third-order intercept point (IP3), low-noise amplifiers (LNAs) are designed for applications in GPS, PCS, WLL, and satellite phone systems. The MAX2654/MAX2655/MAX2656 incorporate on-chip internal output matching to 50Ω, eliminating the need for external matching components. A shutdown feature in the MAX2654/MAX2655 reduces the operating current to 0.1µA, eliminating the need for an external supply switch.

The MAX2654 operates in the GPS frequency of 1575MHz with 15.1dB of gain, 1.5dB noise figure, and only consumes 5.8mA. The MAX2655 is designed with high-input IP3 to improve operation in cellular applications where the cellular power amplifier leaks into the GPS receiver. The MAX2656 is designed for PCS phone applications with 13.5dB of gain in high-gain mode and 0.8dB of gain in low-gain mode (selected by a logic control) and 1.9dB noise figure.

The IP3 of MAX2655/MAX2656 is adjustable by a single external bias resistor (RBIAS), allowing supply current to be optimized for a specific application.

The MAX2654/MAX2655/MAX2656 operate from a +2.7V to +5.5V single supply and are available in the miniature 6-pin SC70 package.
MAX2654, MAX2655, MAX2656: Typical Operating Circuit MAX2654, MAX2655, MAX2656: Typical Operating Circuit Enlarge+

Key Features

  • Low Noise Figure
    • MAX2654: 1.5dB at 1575MHz
    • MAX2655: 1.45dB at 1575MHz
    • MAX2656: 1.9dB at 1960MHz
  • High Gain
    • MAX2654: 15.1dB at 1575MHz
    • MAX2655: 14.1dB at 1575MHz
    • MAX2656: 13.5dB at 1960MHz
  • 12.7dB Gain Step (MAX2656 only)
  • Integrated 50Ω Output Matching
  • Variable IP3 Set by One Bias Resistor (MAX2655/MAX2656 only)
  • 0.1µA Shutdown Mode (MAX2654/MAX2655 only)
  • +2.7V to +5.5V Single-Supply Operation
  • Ultra-Small 6-Pin SC70 Package

Applications/Uses

  • DCS/PCS Cellular Phones
  • GPS Receivers in Cellular Phones
  • Satellite Phones
  • Wireless Local Loop (WLL)
Part NumberRF Freq.
(MHz)
RF Freq.
(MHz)
Noise Figure
(dB)
Gain
(dB)
Input IP3
(dBm)
ISUPPLY
(mA)
Footprint
(mm x mm)
Package/PinsBudgetary
Price
minmaxSee Notes
MAX2655 140017001.4514.13.85.9 to 10.12.0 x 2.1
SC70/6
$0.88 @1k
See All Low-Noise Amplifiers (42)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX2654EVKIT: Evaluation Kit for the MAX2654, MAX2655, MAX2656
MAX2655EVKIT: Evaluation Kit for the MAX2654, MAX2655, MAX2656
MAX2656EVKIT: Evaluation Kit for the MAX2654, MAX2655, MAX2656
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources